-
Notifications
You must be signed in to change notification settings - Fork 0
NCNROutput1D_IQ
srkline-igor edited this page May 7, 2020
·
2 revisions
The 1D output files of reduced SANS data are of the format below. There is a header of information describing the sample information (gleaned from the raw data file) and information about the processing steps that were taken to generate the reduced data file. The data is in a 6-column format where the 6 columns are:
- q (1/Angstrom)
- I(q) (1/cm)
- standard deviation of I(q) (1/cm)
- standard deviation in q of the resolution (1/cm)
- mean q-value for the resolution (1/Angstrom)
- beam stop shadowing factor (=1 if no shadowing effect)
(only a snippet of the file is shown here)
FILE: SILIC009.SA3_SRK_S109 CREATED: Thu, May 8, 2008 5:09:28 PM
LABEL: Silica 2 pct in D2O Scatt 1.3M
MON CNT LAMBDA DET ANG DET DIST TRANS THICK AVE STEP
1e+08 6 20 1.33 0.72501 0.2C 1
BCENT(X,Y) A1(mm) A2(mm) A1A2DIST(m) DL/L BSTOP(mm) DET_TYP
106.8 64.59 50 3 5.4675 0.142 50.8 ORNL
SAM: SILIC009.SA3_SRK_S109
BGD: SILIC004.SA3_SRK_S104,
EMP: SILIC003.SA3_SRK_S103,
DIV: PLEX_2NOV2007_NG3.DIV,
MASK: DEFAULT.MASK,
ABS Parameters (3-6): TSTAND=1;DSTAND=1;IZERO=1.2409e+05;XSECT=1
Average Choices: AVTYPE=Circular;SAVE=Yes;NAME=Auto;PLOT=Yes;
The 6 columns are | Q (1/A) | I(Q) (1/cm) | std. dev. I(Q) (1/cm) | sigmaQ | meanQ | ShadowFactor|
0.001968 0.005782 0.0006038 0.00196 0.003581 1e-10
0.005905 0.005617 0.0006021 0.002647 0.006443 1e-10
0.009842 0.00543 0.0005732 0.00289 0.02377 1.904e-12
0.01378 0.005915 0.0006046 0.002903 0.02387 4.252e-07
0.01771 0.01961 0.00849 0.002934 0.02407 0.001849
0.02165 0.5348 0.1079 0.003038 0.02458 0.1889
0.02558 2.56 0.1322 0.003355 0.02622 0.8726
0.02952 2.922 0.04212 0.003623 0.02969 0.9992
0.03345 2.139 0.04429 0.003739 0.0336 1
0.03738 1.445 0.0324 0.00386 0.03752 1
0.04131 0.9398 0.02119 0.003992 0.04144 1
0.04524 0.6035 0.01302 0.004131 0.04535 1
0.04917 0.3966 0.007888 0.004279 0.04927 1