driver: Add driver for Dediprog SPI-flash emulator

doc/configuration.rst

@@ -1168,6 +1168,34 @@ NetworkDediprogFlasher
 A :any:`NetworkDediprogFlasher` describes a `DediprogFlasher`_ available on a
 remote computer.
 
+SFEmulator
+~~~~~~~~~~
+A :any:`SFEmulator` resource is used to configure the parameters for a
+SPI-flash emulator. This allows a DUT's SPI flash to be replaced or
+overridden with a USB-connected emulator, which is much faster to load than
+reprogramming the DUT's actual SPI flash.
+
+So far only the Dediprog EM100-PRO is supported, so there is no 'model' property
+defined.
+
+Arguments:
+  - serial (str): Serial number of the device
+  - chip (str): SPI-flash chip to emulate
+
+.. code-block:: yaml
+
+  SFEmulator:
+    serial: DP025143
+    chip: W25Q64CV
+
+Used by:
+  - `SFEmulatorDriver`_
+
+NetworkSFEmulator
+~~~~~~~~~~~~~~~~~
+A :any:`NetworkSFEmulator` describes a `SFEmulator`_ available on a
+remote computer.
+
 XenaManager
 ~~~~~~~~~~~
 A :any:`XenaManager` resource describes a *Xena Manager* instance which is the
@@ -3052,6 +3080,15 @@ devices. It is assumed that the device flashing is an exporter wired, via a
 *Dediprog SF100 SPI NOR Flash Programmer* for instance, to the device being
 flashed.
 
+SFEmulatorDriver
+~~~~~~~~~~~~~~~~
+The :any:`SFEmulatorDriver` is used to emulate a SPI-flash device on the DUT.
+
+Binds to:
+  flasher:
+    - `SFEmulator`_
+    - `NetworkSFEmulator`_
+
 XenaDriver
 ~~~~~~~~~~
 The :any:`XenaDriver` allows to use Xena networking test equipment.

labgrid/driver/__init__.py

@@ -48,3 +48,4 @@
 from .deditecrelaisdriver import DeditecRelaisDriver
 from .dediprogflashdriver import DediprogFlashDriver
 from .httpdigitaloutput import HttpDigitalOutputDriver
+from .sfemulatordriver import SFEmulatorDriver

labgrid/driver/sfemulatordriver.py

@@ -0,0 +1,57 @@
+import attr
+from .common import Driver
+from ..factory import target_factory
+from ..step import step
+from ..util.helper import processwrapper
+from ..util.managedfile import ManagedFile
+
+@target_factory.reg_driver
+@attr.s(eq=False)
+class SFEmulatorDriver(Driver):
+    """Provides access to em100 features
+
+    Args:
+        bindings (dict): driver to use with
+        _proc (subprocess.Popen): Process running em100 (used only in trace
+            mode)
+        _trace (str): Filename of trace file, if enabled
+        _thread (Thread): Thread which monitors the subprocess for errors
+    """
+    bindings = {
+        'emul': {'SFEmulator', 'NetworkSFEmulator'},
+    }
+    trace = attr.ib(default=False, validator=attr.validators.instance_of(bool))
+
+    def __attrs_post_init__(self):
+        super().__attrs_post_init__()
+        if self.target.env:
+            self.tool = self.target.env.config.get_tool('em100')
+        else:
+            self.tool = 'em100'
+        self._trace = None
+        self._thread = None
+
+    @Driver.check_active
+    @step(title='write_image', args=['filename'])
+    def write_image(self, filename):
+        '''Write an image to the SPI-flash emulator
+
+        Args:
+            filename (str): Filename to write
+        '''
+        mf = ManagedFile(filename, self.emul)
+        mf.sync_to_resource()
+        cmd = self.emul.command_prefix + [
+            self.tool,
+            '-x', str(self.emul.serial),
+            '-s',
+            '-p', 'LOW',
+            '-c', self.emul.chip,
+            '-d', mf.get_remote_path(),
+            '-r',
+        ]
+
+        processwrapper.check_output(cmd)
+
+    def __str__(self):
+        return f'SFEmulatorDriver({self.emul.serial})'

labgrid/remote/exporter.py

@@ -771,6 +771,25 @@ def _get_params(self):
 
 exports["YKUSHPowerPort"] = YKUSHPowerPortExport
 
+@attr.s(eq=False)
+class SFEmulatorExport(ResourceExport):
+    """ResourceExport for SFEmulator devices"""
+
+    def __attrs_post_init__(self):
+        super().__attrs_post_init__()
+        local_cls_name = self.cls
+        self.data['cls'] = f"Network{local_cls_name}"
+        from ..resource import sfemulator
+        local_cls = getattr(sfemulator, local_cls_name)
+        self.local = local_cls(target=None, name=None, **self.local_params)
+
+    def _get_params(self):
+        return {
+            "host": self.host,
+            **self.local_params
+        }
+
+exports["SFEmulator"] = SFEmulatorExport
 
 class Exporter:
     def __init__(self, config) -> None:

labgrid/resource/__init__.py

@@ -47,3 +47,4 @@
 from .httpdigitalout import HttpDigitalOutput
 from .sigrok import SigrokDevice
 from .fastboot import AndroidNetFastboot
+from .sfemulator import SFEmulator, NetworkSFEmulator

labgrid/resource/sfemulator.py

@@ -0,0 +1,32 @@
+import attr
+
+from ..factory import target_factory
+from .common import NetworkResource, Resource
+
+@target_factory.reg_resource
+@attr.s(eq=False)
+class SFEmulator(Resource):
+    """"This resource describes a Dediprog em100 SPI-Flash Emulator
+
+    This provides serial consoles along with reset control
+
+    Args:
+        serial (str): serial number of the em100 device, e.g. DP025143
+        chip (str): SPI-flash chip to emulate, e.g. W25Q64CV
+    """
+    serial = attr.ib(validator=attr.validators.instance_of(str))
+    chip = attr.ib(validator=attr.validators.instance_of(str))
+
+@target_factory.reg_resource
+@attr.s(eq=False)
+class NetworkSFEmulator(NetworkResource):
+    """"This resource describes a remote Dediprog em100 SPI-Flash Emulator
+
+    This provides serial consoles along with reset control
+
+    Args:
+        serial (str): serial number of the em100 device, e.g. DP025143
+        chip (str): SPI-flash chip to emulate, e.g. W25Q64CV
+    """
+    serial = attr.ib(validator=attr.validators.instance_of(str))
+    chip = attr.ib(validator=attr.validators.instance_of(str))