docs: add reproducible release build guide

docs/release.md

@@ -0,0 +1,125 @@
+# `taproot-assets`'s Reproducible Build System
+
+This package contains the build script that the `taproot-assets` project uses in
+order to build binaries for each new release. As of `go1.13`, with some new
+build flags, binaries are now reproducible, allowing developers to build the
+binary on distinct machines, and end up with a byte-for-byte identical binary.
+However, this wasn't _fully_ solved in `go1.13`, as the build system still
+includes the directory the binary is built into the binary itself. As a result,
+our scripts utilize a work around needed until `go1.13.2`.  
+
+## Building a New Release
+
+### MacOS
+
+The first requirement is to have [`docker`](https://www.docker.com/)
+installed locally and running. The second requirement is to have `make`
+installed. Everything else (including `golang`) is included in the release
+helper image.
+
+To build a release, run the following commands:
+
+```shell
+$  git clone https://github.com/lightninglabs/taproot-assets.git
+$  cd taproot-assets
+$  git checkout <TAG> # <TAG> is the name of the next release/tag
+$  make docker-release tag=<TAG>
+```
+
+Where `<TAG>` is the name of the next release of `taproot-assets`.
+
+### Linux/Windows (WSL)
+
+No prior set up is needed on Linux or macOS is required in order to build the
+release binaries. However, on Windows, the only way to build the release
+binaries at the moment is by using the Windows Subsystem Linux. One can build
+the release binaries following these steps:
+
+```shell
+$  git clone https://github.com/lightninglabs/taproot-assets.git
+$  cd taproot-assets
+$  git checkout <TAG> # <TAG> is the name of the next release/tag
+$  make release tag=<TAG>
+```
+
+This will then create a directory of the form `taproot-assets-<TAG>` containing
+archives of the release binaries for each supported operating system and
+architecture, and a manifest file containing the hash of each archive.
+
+## Verifying a Release
+
+With `go1.13`, it's now possible for third parties to verify release binaries.
+Before this version of `go`, one had to trust the release manager(s) to build the
+proper binary. With this new system, third parties can now _independently_ run
+the release process, and verify that all the hashes of the release binaries
+match exactly that of the release binaries produced by said third parties.
+
+To verify a release, one must obtain the following tools (many of these come
+installed by default in most Unix systems): `gpg`/`gpg2`, `shashum`, and
+`tar`/`unzip`.
+
+Once done, verifiers can proceed with the following steps:
+
+1. Acquire the archive containing the release binaries for one's specific
+   operating system and architecture, and the manifest file along with its
+   signature.
+2. Verify the signature of the manifest file with `gpg --verify
+   manifest-<TAG>.txt.sig`. This will require obtaining the PGP keys which
+   signed the manifest file, which are included in the release notes.
+3. Recompute the `SHA256` hash of the archive with `shasum -a 256 <filename>`,
+   locate the corresponding one in the manifest file, and ensure they match
+   __exactly__.
+
+At this point, verifiers can use the release binaries acquired if they trust
+the integrity of the release manager(s). Otherwise, one can proceed with the
+guide to verify the release binaries were built properly by obtaining `shasum`
+and `go` (matching the same version used in the release):
+
+4. Extract the release binaries contained within the archive, compute their
+   hashes as done above, and note them down.
+5. Ensure `go` is installed, matching the same version as noted in the release
+   notes. 
+6. Obtain a copy of `taproot-assets`'s source code with `git clone
+   https://github.com/lightninglabs/taproot-assets` and checkout the source code of the
+   release with `git checkout <TAG>`.
+7. Proceed to verify the tag with `git verify-tag <TAG>` and compile the
+   binaries from source for the intended operating system and architecture with
+   `make release sys=OS-ARCH tag=<TAG>`.
+8. Extract the archive found in the `taproot-assets-<TAG>` directory created by
+   the release script and recompute the `SHA256` hash of the release binaries
+   (`tapd` and `tapcli`) with `shasum -a 256 <filename>`. These should match
+   __exactly__ as the ones noted above.
+
+## Verifying Docker Images
+
+To verify the `tapd` and `tapcli` binaries inside the
+[official provided docker images](https://hub.docker.com/r/lightninglabs/taproot-assets)
+against the signed, reproducible release binaries, there is a verification
+script in the image that can be called (before starting the container for
+example):
+
+```shell
+$  docker run --rm --entrypoint="" lightninglabs/taproot-assets:v0.3.0 /verify-install.sh v0.3.0
+$  OK=$?
+$  if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
+$  docker run lightninglabs/taproot-assets [command-line options]
+```
+
+# Signing an Existing Manifest File
+
+If you're a developer of `taproot-assets` and are interested in attaching your
+signature to the final release archive, the manifest MUST be signed in a manner
+that allows your signature to be verified by our verify script
+`scripts/verify-install.sh`. 
+
+Assuming you've done a local build for _all_ release targets, then you should
+have a file called `manifest-TAG.txt` where `TAG` is the actual release tag
+description being signed. The release script expects a particular file name for
+each included signature, so we'll need to modify the name of our output
+signature during signing.
+
+Assuming `USERNAME` is your current nick as a developer, then the following
+command will generate a proper signature:
+```shell
+$  gpg --detach-sig --output manifest-USERNAME-TAG.sig manifest-TAG.txt
+```