Skip to content

File Export

Jump to bottom
ludwich66 edited this page Jun 30, 2022 · 12 revisions

Example of a saved File
**Example Temperature:**<br>

2020-12-21 11:23:11:单位为：℃ 25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0,25.0

Comment:<br> 单位为 = the Unit is: °C<br>

TimeOut / SleepMode / Auto-Power-Off
Disable 15 Minutes Timout before take along-range measurement!

  • Clamp-Multimeter (1):
    (12) Auto Power Off
    1. The product automatically powers off after 15 minutes of inactivity;
    2. The built-in-beeper beeps 5 times 1 minute before power off;
    3. To restart the product, press SELECT button;
    4. To disable the Auto Power Off function, hold down the Hz / NCV button when turning on the product, you will hear five beeps if you have successfully disabled the function.

  • Small-Multimeter (2):
    Push this button over 2 seconds to turn on or turn off the product.
    The product automatically powers off after 15 minutes of inactivity and the built-in beeper beeps 5 times 1 minute before auto power off.
    To cancel auto power off, push NCV before turning on the product, after 5 beeps to cancel the auto power off successfully.
    Short push this button to open Bluetooth Bluetooth symbol shows on the screen means Bluetooth function opened , can link to E-bull app on the mobile.
    Short push again to turn off this function.

  • Big-Multimeter (3):
    Turn off the product at this position
    * The product automatically powers off after 15 minutes of inactivity
    * The built-in beeper beeps 5 times 1 minute before auto power off
    * To restart the product from auto power off, press the SEL Button or turn the rotary switch back to the OFF position and then to a needed position
    * To disable the Auto-Power-Off function, hold down the SEL button when turning on the product, you will hear five beeps if you have successfully disabled the function.

Desk-Multimeter (4)

Settings in Android/iOS
 There are Settings in Menu "Setting" for:

Recording time xxx Minute (value 1-999)
Recording interval xx Second (value 1-99)

Clone this wiki locally