autogenerated headers for rev https://github.com/mavlink/mavlink/tree…

…/9c1d1feec0f2bd7ee7f408bed53f3de90a16c537

ASLUAV/ASLUAV.h

@@ -114,7 +114,7 @@ typedef enum MAV_CMD
    MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot, 3: Reboot autopilot and keep it in the bootloader until upgraded.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer, 3: Reboot onboard computer and keep it in the bootloader until upgraded.| WIP: 0: Do nothing for camera, 1: Reboot onboard camera, 2: Shutdown onboard camera, 3: Reboot onboard camera and keep it in the bootloader until upgraded| eboot mount, 2: Shutdown mount, 3: Reboot mount and keep it in the bootloader until upgraded| Reserved, send 0| Reserved, send 0| WIP: ID (e.g. camera ID -1 for all IDs)|  */
    MAV_CMD_OVERRIDE_GOTO=252, /* Override current mission with command to pause mission, pause mission and move to position, continue/resume mission. When param 1 indicates that the mission is paused (MAV_GOTO_DO_HOLD), param 2 defines whether it holds in place or moves to another position. |MAV_GOTO_DO_HOLD: pause mission and either hold or move to specified position (depending on param2), MAV_GOTO_DO_CONTINUE: resume mission.| MAV_GOTO_HOLD_AT_CURRENT_POSITION: hold at current position, MAV_GOTO_HOLD_AT_SPECIFIED_POSITION: hold at specified position.| Coordinate frame of hold point.| Desired yaw angle.| Latitude / X position.| Longitude / Y position.| Altitude / Z position.|  */
    MAV_CMD_MISSION_START=300, /* start running a mission |first_item: the first mission item to run| last_item:  the last mission item to run (after this item is run, the mission ends)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_COMPONENT_ARM_DISARM=400, /* Arms / Disarms a component |0: disarm, 1: arm| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_COMPONENT_ARM_DISARM=400, /* Arms / Disarms a component |0: disarm, 1: arm| 0: only arm-disarm when landed, 21196: enforce arming/disarming even in-air (during flight)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_GET_HOME_POSITION=410, /* Request the home position from the vehicle. |Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved|  */
    MAV_CMD_START_RX_PAIR=500, /* Starts receiver pairing. |0:Spektrum.| RC type.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID |The MAVLink message ID| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
@@ -137,25 +137,25 @@ typedef enum MAV_CMD
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NaN for reserved values. |Reserved (Set to 0)| Desired elapsed time between two consecutive pictures (in seconds). Minimum values depend on hardware (typically greater than 2 seconds).| Total number of images to capture. 0 to capture forever/until MAV_CMD_IMAGE_STOP_CAPTURE.| Capture sequence number starting from 1. This is only valid for single-capture (param3 == 1). Increment the capture ID for each capture command to prevent double captures when a command is re-transmitted. Use 0 to ignore it.| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NaN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* Re-request a CAMERA_IMAGE_CAPTURE message. Use NaN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE message| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
-   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| e camera off or retracting it. -1 to ignore| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NaN for reserved values. |Video Stream ID (0 for all streams)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_VIDEO_START_STREAMING=2502, /* Start video streaming |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_VIDEO_STOP_STREAMING=2503, /* Stop the given video stream |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* Request video stream information (VIDEO_STREAM_INFORMATION) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_REQUEST_VIDEO_STREAM_STATUS=2505, /* Request video stream status (VIDEO_STREAM_STATUS) |Video Stream ID (0 for all streams, 1 for first, 2 for second, etc.)| Reserved (all remaining params)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
-   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
+   MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)|  */
    MAV_CMD_AIRFRAME_CONFIGURATION=2520, /*  |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NaN for no change)| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN| Reserved, set to NaN|  */
    MAV_CMD_CONTROL_HIGH_LATENCY=2600, /* Request to start/stop transmitting over the high latency telemetry |Control transmission over high latency telemetry (0: stop, 1: start)| Empty| Empty| Empty| Empty| Empty| Empty|  */
-   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| Viewing angle vertical of panorama.| Speed of the horizontal rotation.| ed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
+   MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (+- 0.5 the total angle)| cal of panorama.| Speed of the horizontal rotation.| Speed of the vertical rotation.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_ARM_AUTHORIZATION_REQUEST=3001, /* Request authorization to arm the vehicle to a external entity, the arm authorizer is responsible to request all data that is needs from the vehicle before authorize or deny the request. If approved the progress of command_ack message should be set with period of time that this authorization is valid in seconds or in case it was denied it should be set with one of the reasons in ARM_AUTH_DENIED_REASON.
          |Vehicle system id, this way ground station can request arm authorization on behalf of any vehicle| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_SET_GUIDED_SUBMODE_STANDARD=4000, /* This command sets the submode to standard guided when vehicle is in guided mode. The vehicle holds position and altitude and the user can input the desired velocities along all three axes.
                    |Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_SET_GUIDED_SUBMODE_CIRCLE=4001, /* This command sets submode circle when vehicle is in guided mode. Vehicle flies along a circle facing the center of the circle. The user can input the velocity along the circle and change the radius. If no input is given the vehicle will hold position.
-                   |Radius of desired circle in CIRCLE_MODE| efined| User defined| User defined| Unscaled target latitude of center of circle in CIRCLE_MODE| Unscaled target longitude of center of circle in CIRCLE_MODE| Reserved (default:0)|  */
+                   |Radius of desired circle in CIRCLE_MODE| User defined| User defined| User defined| Unscaled target latitude of center of circle in CIRCLE_MODE| Unscaled target longitude of center of circle in CIRCLE_MODE| Reserved (default:0)|  */
    MAV_CMD_CONDITION_GATE=4501, /* Delay mission state machine until gate has been reached. |Geometry: 0: orthogonal to path between previous and next waypoint.| Altitude: 0: ignore altitude| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_NAV_FENCE_RETURN_POINT=5000, /* Fence return point. There can only be one fence return point.
          |Reserved| Reserved| Reserved| Reserved| Latitude| Longitude| Altitude|  */
@@ -178,7 +178,7 @@ typedef enum MAV_CMD
    MAV_CMD_WAYPOINT_USER_4=31003, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
    MAV_CMD_WAYPOINT_USER_5=31004, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
    MAV_CMD_SPATIAL_USER_1=31005, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
-   MAV_CMD_SPATIAL_USER_2=31006, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| efined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
+   MAV_CMD_SPATIAL_USER_2=31006, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
    MAV_CMD_SPATIAL_USER_3=31007, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
    MAV_CMD_SPATIAL_USER_4=31008, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */
    MAV_CMD_SPATIAL_USER_5=31009, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude (MSL), in meters|  */

ASLUAV/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Jul 23 2019"
+#define MAVLINK_BUILD_DATE "Fri Jul 26 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255