Design files for enclosure, including DDS

Files

1. *.fpd

   Front Panel Designer files.

2. *.dxf

   For the waterjet.

3. *.svg and *.png

   Drawing

4. dimensions

   Dimensions of the front/back, top/bottom panels and their offsets from the inner corner.

Holes and Considerations

1. Front

   1. Ethernet and USB serial console input
   2. 44V power input
   3. Mount holes for the DC-DC converter
   4. Board power
   5. SD card and switch. Leave enough space for fingers
   6. Front fan and holes next to the fan for better air flow
   7. Auxiliary USB power input

2. Back

   1. Backup ethernet and USB serial console input
   2. Backup auxiliary USB power input
   3. Back fan and holes next to the fan for better air flow

3. Top

   1. Mount holes for power splitters (8 ports x3, 3 ports x1) with different orientation and position options
   2. TTL/camera link with mount holes for the camera link adapter plate.
   3. CLock output
   4. REF CLK inputs and signal outputs for the DDS boards. Output holes should not make contact with the connectors
   5. Mount holes for the L-brackets for the DDS boards
   6. Auxiliary hole for powering the clock amplifier outside.

4. Bottom

   1. Mount holes for the FPGA board and the breakout boards.

Drawing

1. Front

   

2. Back

   

3. Top

   

4. Bottom

   

Parts

1. Ethernet feedthrough

   EHRJ45P5ES

   

2. USB feedthrough

   17-200001

   

3. L bracket

   621

   

4. Finger guard

   08174

   

5. Fan

   HA92251V4-000U-999

   

6. USB-A Power connector

   A-USBPA-R

   

7. USB-A Male to USB-A Male cable

   AK670/2-1-BLACK-R

8. Power connector

   KPJX-PM-4S