NETOBSERV-1605: reset ebpf global counters after reading them

[msherif1234]

Description

need to reset global counters after we read them

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Will this change affect NetObserv / Network Observability operator? If not, you can ignore the rest of this checklist.
• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
  • If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
  • If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
  • If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
  • Standard QE validation, with pre-merge tests unless stated otherwise.
  • Regression tests only (e.g. refactoring with no user-facing change).
  • No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

[msherif1234]

/ok-to-test

[github-actions]

New image:
quay.io/netobserv/netobserv-ebpf-agent:d1b763b

It will expire after two weeks.

To deploy this build, run from the operator repo, assuming the operator is running:

USER=netobserv VERSION=d1b763b make set-agent-image

[msherif1234]

/ok-to-test

[github-actions]

New image:
quay.io/netobserv/netobserv-ebpf-agent:af62793

It will expire after two weeks.

To deploy this build, run from the operator repo, assuming the operator is running:

USER=netobserv VERSION=af62793 make set-agent-image

[codecov-commenter]

Codecov Report

Attention: Patch coverage is 0% with 4 lines in your changes are missing coverage. Please review.

Project coverage is 34.45%. Comparing base (cb2cf53) to head (7731f8d).
Report is 5 commits behind head on main.

Files	Patch %	Lines
pkg/ebpf/tracer.go	0.00%	4 Missing ⚠️

Additional details and impacted files

@@            Coverage Diff             @@
##             main     #316      +/-   ##
==========================================
+ Coverage   33.63%   34.45%   +0.82%     
==========================================
  Files          47       48       +1     
  Lines        3865     3375     -490     
==========================================
- Hits         1300     1163     -137     
+ Misses       2477     2115     -362     
- Partials       88       97       +9     

Flag	Coverage Δ
unittests	34.45% <0.00%> (+0.82%)	⬆️

Flags with carried forward coverage won't be shown. Click here to find out more.

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

[openshift-ci-robot]

@msherif1234: This pull request references NETOBSERV-1605 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.16.0" version, but no target version was set.

In response to this:

Description

need to reset global counters after we read them

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Will this change affect NetObserv / Network Observability operator? If not, you can ignore the rest of this checklist.
• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[msherif1234]

/approve

[openshift-ci]

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: msherif1234

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Needs approval from an approver in each of these files:

• OWNERS [msherif1234]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment