IPv6 link-local address corruption #7
Comments
neuschaefer
pushed a commit
that referenced
this issue
Dec 24, 2024
Its used from trace__run(), for the 'perf trace' live mode, i.e. its
strace-like, non-perf.data file processing mode, the most common one.
The trace__run() function will set trace->host using machine__new_host()
that is supposed to give a machine instance representing the running
machine, and since we'll use perf_env__arch_strerrno() to get the right
errno -> string table, we need to use machine->env, so initialize it in
machine__new_host().
Before the patch:
(gdb) run trace --errno-summary -a sleep 1
<SNIP>
Summary of events:
gvfs-afc-volume (3187), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
pselect6 1 0 0.000 0.000 0.000 0.000 0.00%
GUsbEventThread (3519), 2 events, 0.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 1 0 0.000 0.000 0.000 0.000 0.00%
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
478 if (env->arch_strerrno == NULL)
(gdb) bt
#0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478
#1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673
#2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708
#3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747
#4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456
#5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487
#6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351
#7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404
#8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448
torvalds#9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560
(gdb)
After:
root@number:~# perf trace -a --errno-summary sleep 1
<SNIP>
pw-data-loop (2685), 1410 events, 16.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68%
ioctl 94 0 0.811 0.004 0.009 0.016 2.82%
read 188 0 0.322 0.001 0.002 0.006 5.15%
write 141 0 0.280 0.001 0.002 0.018 8.39%
timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47%
gnome-control-c (179406), 1848 events, 20.9%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
poll 222 0 959.577 0.000 4.322 21.414 11.40%
recvmsg 150 0 0.539 0.001 0.004 0.013 5.12%
write 300 0 0.442 0.001 0.001 0.007 3.29%
read 150 0 0.183 0.001 0.001 0.009 5.53%
getpid 102 0 0.101 0.000 0.001 0.008 7.82%
root@number:~#
Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()")
Reported-by: Veronika Molnarova <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Acked-by: Veronika Molnarova <[email protected]>
Acked-by: Michael Petlan <[email protected]>
Tested-by: Michael Petlan <[email protected]>
Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1
Signed-off-by: Namhyung Kim <[email protected]>
neuschaefer
pushed a commit
that referenced
this issue
Dec 24, 2024
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips. Fixes: 13d2d3d ("bnxt_en: Add new P7 hardware interface definitions") Reviewed-by: Damodharam Ammepalli <[email protected]> Reviewed-by: Kalesh AP <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
what the fuck is this?
fe80::1111:2222:3333:4444fe80::a:b:c:d, on Hi3518, kernel 6.5.0wget fe80::1111:2222:3333:4444%eth0::a:b:c:d:0:0TODO:
The text was updated successfully, but these errors were encountered: