Home

Welcome to the NetMod-ServerApp wiki!

The "Network Module Manual" in Word/ODT/PDF format on the opening GitHub page provides detailed instructions on how to program and use the Network Module. Link: https://github.com/nielsonm236/NetMod-ServerApp

If you have specific issues it is best to write them up in the Issues section. Don't worry if they turn out to be minor ... the Issue can always be closed. But writing them up there sometimes helps others as they may have the same questions. Also, you can contact me directly at [email protected].

Quick Help:

Configuration - MQTT Firmware

You should change the IO Type first (Input/Output/Disable), THEN Save, THEN come back and make changes to the Invert and Boot State settings.

Configuration - Browser Only Firmware

You should change the IO Type first (Input/Output/Disable), THEN Save, THEN come back and make changes to the Invert and Boot State settings

MAC Help

Features Settings

IO Control - MQTT Firmware

IO Control - Browser Only Firmware

REST Help

YouTube

A YouTube video (updated 5/9/2021) is available that demonstrate the re-programmed module and shows how to do the programming at https://youtu.be/cnLHd9GqplY