Model submission for m100 sensor configuration 1 from CERBERUS. #386
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…_sensor_config_1 (pull request #432) Model submission for m100 sensor configuration 1 from CERBERUS.
|
The initial assessment of the CERBERUS M100 model is complete, however there are some issues to resolve before this model can be merged and utilized in a competitive setting:
Please address the issues noted above and then submit a pull request to update your submission by 5 JUNE. The submissions are expected to be incorporated into the SubT Virtual Testbed pending a successful review. |
|
latest commit should have fixed these points |
Can you please link submit a new PR into |
should be done |
Fix for issues on cerberus_m100_sensor_config_1
|
@tiralonghipol Is this file: submitted_models/cerberus_m100_sensor_config_1/meshes/m100.dae.orig still being used or can it be removed? |
|
@mjcarroll it can be removed |
* Remove .orig file Signed-off-by: Michael Carroll <[email protected]> * Add support for efficient pose publisher Signed-off-by: Michael Carroll <[email protected]> * Add optical frame publisher Signed-off-by: Michael Carroll <[email protected]> * Update spawner syntax Signed-off-by: Michael Carroll <[email protected]>
mjcarroll
approved these changes
Jun 19, 2020
|
I'm merging this PR into the cave_feature_release3 branch. This robot will be available when the feature release branch is merged into master. |
nkoenig
added a commit
that referenced
this pull request
Jun 24, 2020
* Submitted models/robotika kloubak sensor config 1 (#381) * Model submission for Kloubak sensor configuration 1 from Robotika * Kloubak URDF ver0 * Robotika Kloubak URDF ver1 * Robotika Kloubak - scale material parameters to 0..1 * Kloubak specification.md ver0 * Robotika Kloubak - update specification.md * Robotika Kloubak - fix also urdf/model.xacro (range 0..1) * Branch for pull request #431 * Robotika Kloubak K2 - fixes (lidar, odometry, battery power_load, ...) * Adjustment to route front and rear DiffDrive odometry to the appropriate topics. * Robotika Kloubak K2 - update specification * Robotika Kloubak K2 - update specification2 * Robotika Kloubak K2 - update specification3 * Update specifications.md with magnetometer and added optical frame publishers Signed-off-by: Nate Koenig <[email protected]> * Updating tf Signed-off-by: Nate Koenig <[email protected]> * Fix spawning Signed-off-by: Nate Koenig <[email protected]> * Updated to use photogrammetry meshes Signed-off-by: Nate Koenig <[email protected]> * Download model Signed-off-by: Nate Koenig <[email protected]> * 60 minutes of charge Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: md <devnull@localhost> Co-authored-by: Martin Dlouhy <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Arthur Schang <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Model submission for Freyja sensor configuration 1 from Robotika (#382) * Model submission for Freyja sensor configuration 1 from Robotika * Model submission for Freyja sensor configuration 1 from Robotika (FIXUP specification.md) * Update info about Freyja communication (LoRa) * Freyja - fix camera center * Robotika Freyja - fix filename model.urdf * Robotika Freyja - fix materials to be in parameters in range 0..1 * Robotika Freyja - fix mount parts of the wheel * Branch for pull request #423 * Virtual Freyja fixes * Virtual Freyja - fix power_load to reflect much longer durability * Adjustment of battery life to 240 minutes. * update model to use tf2 static pose messages, and added a better xacro file Signed-off-by: Nate Koenig <[email protected]> * spacing Signed-off-by: Nate Koenig <[email protected]> * Download model Signed-off-by: Nate Koenig <[email protected]> * Updated thumbnails and battery life Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: md <devnull@localhost> Co-authored-by: Martin Dlouhy <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Arthur Schang <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Model submission for QAV500 sensor configuration 1 by Marble (#385) * creating qav500 branch * working on qav500 * working on qav500. I need to remember to commit during the day * Commented out bridge logger * One functioning pico flexx camera pointing up * added bottom tof * modified position of downward tof camera * Added xacro file and modified description. Modified model.sdf to remove local links to URI * modified descriptions in model.config and package.xml * Added point clouds to tof cameras * Modified files to load properly in rviz. Added description on package * Remove husky folder * Update IMU to reflect terms for Microstrain 3DM-GX5-15 * Started editing the specs and package.xml * Adding specifications file * updated price in spec file * Small update to specs to add Intel Nuc * modified inertia of vehicle * Added light, needs fix * modifying motor paramters * Reverted to original motor parameters * Reverted motor parameters. Fixed ghost drone * Branch for pull request #428 * Removed scientific notation in model.sdf IMU settings * updated ouster lidar model * Reduce the resolution of the rgbd camera on the qav500 to help the simulator go a little faster. * Fix the wideness of the light to mirror that on the ground vehicles * Edited the velocity controller for the qav500 so that it holds yaw better and has a little more umph to it. * fixed issue with tof point clouds not publishing * updated to be compatible with latest OSRF changes * Updated from OS1 gen 2 to OS1 gen 1 * marble_qav500 updated lidar rate from 15 to 20 to reflect actual sensor configuration * updated IMU to X1 model * Model maximum linear velocity limited to 4m/s and battery life is limited to 10 minutes until validation data is provided. * Readjusted OS1-64 to align with specification sheet for vertical FoV (+-22.5 degrees). * Revert "Readjusted OS1-64 to align with specification sheet for vertical FoV (+-22.5 degrees)." This reverts commit e7e26b5. OS1-64 generation 1 is actually +-16.6 degrees. * clarifications to specifications.md * added optical frame publisher * added bridge_logger back in * Model pr 428 -Improved UAV drift && Updated camera topic names (#467) * making qav500 fly better * renamed certain qav500 camera topics * tweaking max velocities and accels Co-authored-by: Derek Vasquez <[email protected]> Co-authored-by: Derek Vasquez <[email protected]> * reset model's max linear velocity to 4m/s * Updated model, thumbnails, and added to download scipt Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: derekvasquez <devnull@localhost> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: hector_escobar <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: bfotheri <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Arthur Schang <[email protected]> Co-authored-by: Ashton Larkin <[email protected]> Co-authored-by: Derek Vasquez <[email protected]> Co-authored-by: Derek Vasquez <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Model submission for CERBERUS ANYmal sensor configuration 1 from RSL-ETH Zurich (#383) * Model submission for CERBERUS ANYmal sensor configuration 1 from RSL-ETH Zurich. * update readme * Branch for pull request #434 * add new plugin and adjusted launch files * remove old laser * cleanup files for renaming * renaming * rename and adjust plugin package * update REDME * add gas sensor, enable battery plugin * change camera parameters * add noise, fix camera pose * recompile plugin * reduce noise std dev * change parameter name * adjust realsense position * Corrected adjusted power_load to set battery life to 70 minutes. * Use `<spawn>` instead of `<plugin>` Signed-off-by: Addisu Z. Taddese <[email protected]> * Add static pose publisher Signed-off-by: Addisu Z. Taddese <[email protected]> * Add optical frame, rename downward_realsense/depth/image_raw to downward_realsense/depth The rename makes DepthCloud in Rviz work without any topic relays Signed-off-by: Addisu Z. Taddese <[email protected]> * Minor tweak Signed-off-by: Addisu Z. Taddese <[email protected]> * Minor tweaks and added to download script Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: Marco Tranzatto <[email protected]> Co-authored-by: zsamuel <[email protected]> Co-authored-by: Angela Maio <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Arthur Schang <[email protected]> Co-authored-by: Addisu Z. Taddese <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Model Submission for Marble HD2 sensor configuration 1 (#387) * test commit * Close branch submitted_models/marble_husky_sensor_config_1. * Added files for husky. Name will need to be changed * creating hd2 branch * Downward facing facing is there * working on qav500 * Got all sensor positioned and represented visually up to the pan tilt tower. That comes next * Model sdf now has the gimbal pan, still unsure of how to control it though * Until the joints can be tested this is where the marble hsuky model will get * Got the joint state controller and publisher added in. Pan/Tilt can be controlled using ignition messages. * More works needs to be done on bridges to control gimbal, but commented out in progress work is available in vehicle_topics.launch for the marble husky * adding hd2. stl of tracked vehicle is in * We can now command the gimbal pan/tilt using ros topics as long as you use the modified version of ros_ign_bridge committed under pull request 64 * Rudimentary visuals done * Fixed the joint publisher. Topic shows up in ros as /<vehicle name>/joint_state. * hd2 model in. Working on sensors * Removing non-hd2 vehicles from this branch * Update sdf file, add test_gimbal script, add specifications.md file, and remove CU_MARBLE folder * Added the xacro file for rviz * added a file * Started over on sdf file by starting with husky file and just replacing the base_link model. Added specfications.md file (which needs to be updated). Add some missing mesh files. * Updated sensor description in package.xml * Got the pan/tilt and all vehicle topics working, I think. Need to go over all sensors and make sure they work. Also added scripts for echoing the current pan and tilt angles * Added urdf file (xacro) for rviz * Updated the IMU model to match the specs from datasheet for Microstrain 3DM-GX5-25 used in Marble ground vehicles * Updated IMU model to Microstrain 3DM-GX5-25 as in HD2. Added link to datasheet for IMU in specifications.md file * Add pan and tilt echoing scripts * Updated and completed specifications.md file for husky * Put in four wheels and modified the differential drive system * Updated package.xml, specifications.md, and added Build instructions for ros_ign_bridge * Couple of edits to description files. * added tracks. modified sensor placement * Updated the xacro * Update cost info in specs. * Update cost info * Fixed 3d Lidar obstructions * Get rid of garbage file... * Fixed position of lidar and plate sensor * Fixed urdf and xacro * Updated xacro/urdf file * Fixing inertia gimbal problems * Fixing gimbal inertia * Fixing gimbal inertia, using rod inertia formulas * Fixing gimbal inertia, using rod inertia formulas, and correct tabbing * Updated intertias using rod formulas * Branch for pull request #427 * Branch for pull request #426 * Fix scientific notation in husky model.sdf file * Removed scientific notation in model.sdf file IMU settings * reduce the resolution of the husky cameras. At 720p, everything is really slow * Updated ouster lidar sensor model * Updated ouster lidar model * Reduce resolution of cameras on hd2 to 640x480 to help simulation work smoother. * Changed the forward and downward facing rgbd cameras to use a lower resolution (which matches the model for d435i cameras which have selectable resolutions). Also, updated the scaled focal length parameters for all cameras which were previously wrong. * Removed husky files from hd2 branch. These should be the other branch, not here. * Fix the parameters for the lights (mount angle and bean width) * updated to work on newest OSRF code * Updated from OS1 gen 2 to OS1 gen 1 * updated IMU to X1 model * Weight updated to be 75 lbs total * Corrected typo in model.sdf * Adjusted power_load to reduce battery life to 60 minutes. * Updated vehicle params based on PR feedback (depth topics, vel limits, uncommented logger (#463) * remove trailing chars Signed-off-by: Ian Chen <[email protected]> * Model pr 427 - Updated custom ign bridge build instructions as per request (#466) * Updated vehicle params based on PR feedback (depth topics, vel limits, uncommented logger * updated instructions for building ros ign bridge * force control for gimbal Signed-off-by: Ian Chen <[email protected]> * Updated mesh Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: bfotheri <[email protected]> Co-authored-by: derekvasquez <devnull@localhost> Co-authored-by: derek knowles <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: hector_escobar <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Arthur Schang <[email protected]> Co-authored-by: Ian Chen <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Model submission for Husky sensor configuration 1 by Marble (#384) * test commit * Close branch submitted_models/marble_husky_sensor_config_1. * Added files for husky. Name will need to be changed * creating hd2 branch * Downward facing facing is there * working on qav500 * Got all sensor positioned and represented visually up to the pan tilt tower. That comes next * Model sdf now has the gimbal pan, still unsure of how to control it though * Until the joints can be tested this is where the marble hsuky model will get * Got the joint state controller and publisher added in. Pan/Tilt can be controlled using ignition messages. * More works needs to be done on bridges to control gimbal, but commented out in progress work is available in vehicle_topics.launch for the marble husky * adding hd2. stl of tracked vehicle is in * We can now command the gimbal pan/tilt using ros topics as long as you use the modified version of ros_ign_bridge committed under pull request 64 * Rudimentary visuals done * Fixed the joint publisher. Topic shows up in ros as /<vehicle name>/joint_state. * hd2 model in. Working on sensors * Removing non-hd2 vehicles from this branch * Update sdf file, add test_gimbal script, add specifications.md file, and remove CU_MARBLE folder * Added the xacro file for rviz * added a file * Started over on sdf file by starting with husky file and just replacing the base_link model. Added specfications.md file (which needs to be updated). Add some missing mesh files. * Updated sensor description in package.xml * Got the pan/tilt and all vehicle topics working, I think. Need to go over all sensors and make sure they work. Also added scripts for echoing the current pan and tilt angles * Added urdf file (xacro) for rviz * Updated the IMU model to match the specs from datasheet for Microstrain 3DM-GX5-25 used in Marble ground vehicles * Updated IMU model to Microstrain 3DM-GX5-25 as in HD2. Added link to datasheet for IMU in specifications.md file * Add pan and tilt echoing scripts * Updated and completed specifications.md file for husky * Put in four wheels and modified the differential drive system * Updated package.xml, specifications.md, and added Build instructions for ros_ign_bridge * Couple of edits to description files. * added tracks. modified sensor placement * Updated the xacro * Update cost info in specs. * Update cost info * Fixed 3d Lidar obstructions * Get rid of garbage file... * Fixed position of lidar and plate sensor * Fixed urdf and xacro * Updated xacro/urdf file * Fixing inertia gimbal problems * Fixing gimbal inertia * Fixing gimbal inertia, using rod inertia formulas * Fixing gimbal inertia, using rod inertia formulas, and correct tabbing * Updated intertias using rod formulas * Branch for pull request #427 * Branch for pull request #426 * Fix scientific notation in husky model.sdf file * Removed scientific notation in model.sdf file IMU settings * reduce the resolution of the husky cameras. At 720p, everything is really slow * Updated ouster lidar sensor model * Updated ouster lidar model * Reduce resolution of cameras on hd2 to 640x480 to help simulation work smoother. * Changed the forward and downward facing rgbd cameras to use a lower resolution (which matches the model for d435i cameras which have selectable resolutions). Also, updated the scaled focal length parameters for all cameras which were previously wrong. * Reduce resolution of forward and downward rgbd cameras to help simulator run faster. Also, fix the scaled focal lengths on all 3 rgbd cameras to match reality * Removing hd2 from husky branch. It shouldn't be here. * Fix the mount angle and sweep angle of the light, and fix the pose of the down-pointing camera (the pose seems to have been deleted at some point, so we are simply restoring it) * updated with master * changing from OS1 gen 2 to OS1 gen 1 * updated IMU to X1 model * Updated branch based on recommended PR changes (#464) * Made changes based on pull request comments * Update spawner.rb to fix negative accel limit * updated instructions for building ros ign bridge * Update spawner.rb Co-authored-by: Carlos Agüero <[email protected]> * Added to download script Signed-off-by: Nate Koenig <[email protected]> * Change pan/tilt joints to be controlled by force commands. Signed-off-by: Carlos Aguero <[email protected]> * Tweak gimbal limits Signed-off-by: Carlos Aguero <[email protected]> * Merged and added missing download Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: bfotheri <[email protected]> Co-authored-by: derekvasquez <devnull@localhost> Co-authored-by: derek knowles <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: hector_escobar <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Carlos Agüero <[email protected]> Co-authored-by: Nate Koenig <[email protected]> Co-authored-by: Carlos Aguero <[email protected]> * Model submission for m100 sensor configuration 1 from CERBERUS. (#386) * Model submission for m100 sensor configuration 1 from CERBERUS. * Branch for pull request #432 * fix: + camera intrinsic + gas sensor + lidar vertical resolution * minor fix * another fix * Updates to m100 model submission (#470) * Remove .orig file Signed-off-by: Michael Carroll <[email protected]> * Add support for efficient pose publisher Signed-off-by: Michael Carroll <[email protected]> * Add optical frame publisher Signed-off-by: Michael Carroll <[email protected]> * Update spawner syntax Signed-off-by: Michael Carroll <[email protected]> Co-authored-by: pdepetris <[email protected]> Co-authored-by: tiralonghipol <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Michael Carroll <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Added model to download Signed-off-by: Nate Koenig <[email protected]> * Setting max_velocities/accelerations for X1 and X2 (#453) * Setting max_velocities/accelerations for X1 and X2. Signed-off-by: Carlos Aguero <[email protected]> * Added to other launch files Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: Carlos Aguero <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Robotika Kloubak model updates (#472) * Fixed the ign topic transport topic mapping for the front and rear odometry on the Robotika Kloubak model. * Adjusted camera placement to correct field of view. * Update Marble HD2 gimbal meshes and sensor pose (#471) * update marble hd2 meshes Signed-off-by: Ian Chen <[email protected]> * add some friction to pan joint Signed-off-by: Ian Chen <[email protected]> * Websocket (#474) * websockets Signed-off-by: Nate Koenig <[email protected]> * Working on websockets Signed-off-by: Nate Koenig <[email protected]> * Added SSL Signed-off-by: Nate Koenig <[email protected]> * Remove branch Signed-off-by: Nate Koenig <[email protected]> Co-authored-by: Nate Koenig <[email protected]> * Update Marble And Kloubak models. (#473) * Updated specifications and added missing optical frames Signed-off-by: Nate Koenig <[email protected]> * Fix kloubak axle and wheel positions Signed-off-by: Nate Koenig <[email protected]> * New mesh with axel submesh Signed-off-by: Nate Koenig <[email protected]> * bridge tof camera info Signed-off-by: Ian Chen <[email protected]> Co-authored-by: Nate Koenig <[email protected]> Co-authored-by: Ian Chen <[email protected]> Co-authored-by: md <devnull@localhost> Co-authored-by: Martin Dlouhy <[email protected]> Co-authored-by: acschang <[email protected]> Co-authored-by: Arthur Schang <[email protected]> Co-authored-by: Nate Koenig <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: hector_escobar <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: Neil Johnson <[email protected]> Co-authored-by: bfotheri <[email protected]> Co-authored-by: Ashton Larkin <[email protected]> Co-authored-by: Derek Vasquez <[email protected]> Co-authored-by: Derek Vasquez <[email protected]> Co-authored-by: Marco Tranzatto <[email protected]> Co-authored-by: zsamuel <[email protected]> Co-authored-by: Angela Maio <[email protected]> Co-authored-by: Addisu Z. Taddese <[email protected]> Co-authored-by: derek knowles <[email protected]> Co-authored-by: Ian Chen <[email protected]> Co-authored-by: Carlos Agüero <[email protected]> Co-authored-by: Carlos Aguero <[email protected]> Co-authored-by: pdepetris <[email protected]> Co-authored-by: tiralonghipol <[email protected]> Co-authored-by: Michael Carroll <[email protected]> Co-authored-by: Carlos Agüero <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
modified pull request target branch
default → model_pr_432