Audiophonics I-Sabre 9038Q2M DAC driver

Signed-off-by: Audiophonics <[email protected]>

arch/arm/boot/dts/overlays/Makefile

@@ -55,6 +55,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	hy28a.dtbo \
 	hy28b.dtbo \
 	hy28b-2017.dtbo \
+	i-sabre-q2m.dtbo \
 	i2c-bcm2708.dtbo \
 	i2c-gpio.dtbo \
 	i2c-mux.dtbo \

arch/arm/boot/dts/overlays/README

@@ -869,6 +869,12 @@ Params: speed                   Display SPI bus speed
         ledgpio                 GPIO used to control backlight
 
 
+Name:   i-sabre-q2m
+Info:   Configures the Audiophonics I-SABRE Q2M DAC
+Load:   dtoverlay=i-sabre-q2m
+Params: <None>
+
+
 Name:   i2c-bcm2708
 Info:   Fall back to the i2c_bcm2708 driver for the i2c_arm bus.
 Load:   dtoverlay=i2c-bcm2708

arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts

@@ -0,0 +1,39 @@
+// Definitions for I-Sabre Q2M
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&sound>;
+		frag0: __overlay__ {
+			compatible = "audiophonics,i-sabre-q2m";
+			i2s-controller = <&i2s>;
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&i2s>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			i-sabre-codec@48 {
+				#sound-dai-cells = <0>;
+				compatible = "audiophonics,i-sabre-codec";
+				reg = <0x48>;
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/configs/bcm2709_defconfig

@@ -916,6 +916,7 @@ CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m
 CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m
 CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
 CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m
+CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M=m
 CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
 CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
 CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD=m

arch/arm/configs/bcmrpi_defconfig

@@ -909,6 +909,7 @@ CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m
 CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m
 CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
 CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m
+CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M=m
 CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
 CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
 CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD=m

arch/arm64/configs/bcmrpi3_defconfig

@@ -804,6 +804,7 @@ CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m
 CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m
 CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
 CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m
+CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M=m
 CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
 CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
 CONFIG_SND_AUDIOSENSE_PI=m

sound/soc/bcm/Kconfig

@@ -123,6 +123,13 @@ config SND_BCM2708_SOC_IQAUDIO_DIGI
 	help
 	  Say Y or M if you want to add support for IQAudIO Digital IO board.
 
+config SND_BCM2708_SOC_I_SABRE_Q2M
+        tristate "Support for Audiophonics I-Sabre Q2M DAC"
+        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+        select SND_SOC_I_SABRE_CODEC
+        help
+        Say Y or M if you want to add support for Audiophonics I-SABRE Q2M DAC
+
 config SND_BCM2708_SOC_ADAU1977_ADC
 	tristate "Support for ADAU1977 ADC"
 	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S

sound/soc/bcm/Makefile

@@ -19,6 +19,7 @@ snd-soc-justboom-dac-objs := justboom-dac.o
 snd-soc-rpi-cirrus-objs := rpi-cirrus.o
 snd-soc-rpi-proto-objs := rpi-proto.o
 snd-soc-iqaudio-dac-objs := iqaudio-dac.o
+ snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o
 snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
 snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o
 snd-soc-audiosense-pi-objs := audiosense-pi.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o
 obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o
 obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
 obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
+ obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o
 obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
 obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o
 obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o

sound/soc/bcm/i-sabre-q2m.c

@@ -0,0 +1,157 @@
+/*
+ * ASoC Driver for I-Sabre Q2M
+ *
+ * Author: Satoru Kawase
+ * Modified by: Xiao Qingyong
+ * Update kernel v4.18+ by : Audiophonics
+ * 		Copyright 2018 Audiophonics
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "../codecs/i-sabre-codec.h"
+
+
+static int snd_rpi_i_sabre_q2m_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_component *component = rtd->codec_dai->component;
+	unsigned int value;
+
+	/* Device ID */
+	value = snd_soc_component_read32(component, ISABRECODEC_REG_01);
+	dev_info(component->card->dev, "Audiophonics Device ID : %02X\n", value);
+
+	/* API revision */
+	value = snd_soc_component_read32(component, ISABRECODEC_REG_02);
+	dev_info(component->card->dev, "Audiophonics API revision : %02X\n", value);
+
+	return 0;
+}
+
+static int snd_rpi_i_sabre_q2m_hw_params(
+	struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd     = substream->private_data;
+	struct snd_soc_dai         *cpu_dai = rtd->cpu_dai;
+	int bclk_ratio;
+
+	bclk_ratio = snd_pcm_format_physical_width(
+			params_format(params)) * params_channels(params);
+	return snd_soc_dai_set_bclk_ratio(cpu_dai, bclk_ratio);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_i_sabre_q2m_ops = {
+	.hw_params = snd_rpi_i_sabre_q2m_hw_params,
+};
+
+
+static struct snd_soc_dai_link snd_rpi_i_sabre_q2m_dai[] = {
+	{
+		.name           = "I-Sabre Q2M",
+		.stream_name    = "I-Sabre Q2M DAC",
+		.cpu_dai_name   = "bcm2708-i2s.0",
+		.codec_dai_name = "i-sabre-codec-dai",
+		.platform_name  = "bcm2708-i2s.0",
+		.codec_name     = "i-sabre-codec-i2c.1-0048",
+		.dai_fmt        = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+						| SND_SOC_DAIFMT_CBS_CFS,
+		.init           = snd_rpi_i_sabre_q2m_init,
+		.ops            = &snd_rpi_i_sabre_q2m_ops,
+	}
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_i_sabre_q2m = {
+	.name      = "I-Sabre Q2M DAC",
+	.owner     = THIS_MODULE,
+	.dai_link  = snd_rpi_i_sabre_q2m_dai,
+	.num_links = ARRAY_SIZE(snd_rpi_i_sabre_q2m_dai)
+};
+
+
+static int snd_rpi_i_sabre_q2m_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	snd_rpi_i_sabre_q2m.dev = &pdev->dev;
+	if (pdev->dev.of_node) {
+		struct device_node *i2s_node;
+		struct snd_soc_dai_link *dai;
+
+		dai = &snd_rpi_i_sabre_q2m_dai[0];
+		i2s_node = of_parse_phandle(pdev->dev.of_node,
+							"i2s-controller", 0);
+		if (i2s_node) {
+			dai->cpu_dai_name     = NULL;
+			dai->cpu_of_node      = i2s_node;
+			dai->platform_name    = NULL;
+			dai->platform_of_node = i2s_node;
+		} else {
+			dev_err(&pdev->dev,
+			    "Property 'i2s-controller' missing or invalid\n");
+			return (-EINVAL);
+		}
+
+		dai->name        = "I-Sabre Q2M";
+		dai->stream_name = "I-Sabre Q2M DAC";
+		dai->dai_fmt     = SND_SOC_DAIFMT_I2S
+					| SND_SOC_DAIFMT_NB_NF
+					| SND_SOC_DAIFMT_CBS_CFS;
+	}
+
+	/* Wait for registering codec driver */
+	mdelay(50);
+
+	ret = snd_soc_register_card(&snd_rpi_i_sabre_q2m);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"snd_soc_register_card() failed: %d\n", ret);
+	}
+
+	return ret;
+}
+
+static int snd_rpi_i_sabre_q2m_remove(struct platform_device *pdev)
+{
+	return snd_soc_unregister_card(&snd_rpi_i_sabre_q2m);
+}
+
+static const struct of_device_id snd_rpi_i_sabre_q2m_of_match[] = {
+	{ .compatible = "audiophonics,i-sabre-q2m", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, snd_rpi_i_sabre_q2m_of_match);
+
+static struct platform_driver snd_rpi_i_sabre_q2m_driver = {
+	.driver = {
+		.name           = "snd-rpi-i-sabre-q2m",
+		.owner          = THIS_MODULE,
+		.of_match_table = snd_rpi_i_sabre_q2m_of_match,
+	},
+	.probe  = snd_rpi_i_sabre_q2m_probe,
+	.remove = snd_rpi_i_sabre_q2m_remove,
+};
+module_platform_driver(snd_rpi_i_sabre_q2m_driver);
+
+MODULE_DESCRIPTION("ASoC Driver for I-Sabre Q2M");
+MODULE_AUTHOR("Audiophonics <http://www.audiophonics.fr>");
+MODULE_LICENSE("GPL");

sound/soc/codecs/Kconfig

@@ -85,6 +85,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_ICS43432
 	select SND_SOC_INNO_RK3036
 	select SND_SOC_ISABELLE if I2C
+	select SND_SOC_I_SABRE_CODEC if I2C
 	select SND_SOC_JZ4740_CODEC
 	select SND_SOC_LM4857 if I2C
 	select SND_SOC_LM49453 if I2C
@@ -1322,4 +1323,8 @@ config SND_SOC_TPA6130A2
 	tristate "Texas Instruments TPA6130A2 headphone amplifier"
 	depends on I2C
 
+config SND_SOC_I_SABRE_CODEC
+	tristate "Audiophonics I-SABRE Codec"
+	depends on I2C
+
 endmenu

sound/soc/codecs/Makefile

@@ -81,6 +81,7 @@ snd-soc-hdac-hdmi-objs := hdac_hdmi.o
 snd-soc-ics43432-objs := ics43432.o
 snd-soc-inno-rk3036-objs := inno_rk3036.o
 snd-soc-isabelle-objs := isabelle.o
+snd-soc-i-sabre-codec-objs := i-sabre-codec.o
 snd-soc-jz4740-codec-objs := jz4740.o
 snd-soc-l3-objs := l3.o
 snd-soc-lm4857-objs := lm4857.o
@@ -343,6 +344,7 @@ obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-soc-hdac-hdmi.o
 obj-$(CONFIG_SND_SOC_ICS43432)	+= snd-soc-ics43432.o
 obj-$(CONFIG_SND_SOC_INNO_RK3036)	+= snd-soc-inno-rk3036.o
 obj-$(CONFIG_SND_SOC_ISABELLE)	+= snd-soc-isabelle.o
+obj-$(CONFIG_SND_SOC_I_SABRE_CODEC)	+= snd-soc-i-sabre-codec.o
 obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_LM4857)	+= snd-soc-lm4857.o