FakeCyton

The fake_cyton.py script creates a "virtual" serial device that streams data in the format of a Cyton board. Useful for testing software when you don't have a real board.

Samples are loaded from sample-cyton.csv. These samples are looped to provide an endless stream.

Start

Run fake_cyton.py to create the serial device. Note the serial port, printed immediately after starting. This is the address of your imaginary Cyton board:

~:$ python fake_cyton.py
Connect @ /dev/ttys006

Use with OpenBCI Python

To use the fake device with OpenBCI Python's user.py script, specify the device's port as --port:

~:$ python user.py --port /dev/ttys006 --add print
------------user.py-------------
Board type: OpenBCI Cyton (v3 API)
Port:  /dev/ttys006
...

Once connected, run the user.py script's /start command to tell the fake device to start generating samples:

--> /start
---------------------------------
ID: 0.000000
25307.33797637677, 35450.96194159531, -187500.02235174447, -187500.02235174447, -187500.02235174447, -187500.02235174447, -187500.02235174447, -187500.02235174447
0.008, -0.006, 1.01
---------------------------------
...

When you're done, use the /stop or /exit commands to tell the fake device to stop generating samples:

--> /stop
Stopping streaming...
Wait for buffer to flush...

Todo

• Allow alternative .csv file (or directory of .csv files) at command line.
• Fix "serial.serialutil.SerialException: device reports readiness" exception raised after /stop command in OpenBCI Python user.py script.