TL;DR

Readme on Readthedocs:

Docker image Cloud Build Status. Note: Sometimes images are built locally and pushed dockerhub

TL;DR

The Init section will grow to contain everything that you need to know this project and get started with using the tools.
The easiest way at the moment to test-drive these containers is via the Matrix DS platform. Here is a project you can forklift, that has the shiny image added as a custom tool that can be launched.
The notes section contains additional notes gathered while developing this project.
Archive contains test and initial configurations that is essentially a sandbox for future projects. These may not be exported in the Readme.md. However these will be available in the Readme.org file
One alternate method currently available to read the documentation is via readthedocs

Quick Commands:

Docker Images:

docker pull shrysr/shiny:v2
docker pull shrysr/rstudio:v2

Docker compose to launch services:

docker compose up -d rstudio
docker compose up -d shiny
# To launch both : docker compose up -d

Init

The starting point of this project was Matt Dancho's shinyauth docker file, which then expanded into adapting the well designed Matrix DS tools for my purpose. Their stack of docker based tools is replicated here with my customization which adds libraries and other functionality.

The goal is to develop a workflow based on Docker (and other tools) to create a reproducible, standard, consistent environment to run a variety of datascience projects, with different development and production environments. In particular, I want to be able to develop and deploy dashboards like shiny or streamlit.io quickly and with ease.

This Readme consists of the entire documentation and source code, maintained in a single Org mode document which is used to regenerate and manage the entire source code and the exports to markdown and rst. i.e Literate Programming in all it's splendor and warts.

Why not just use the MatrixDS stack directly and add the missing packages as layers?

In a sense, that is what I did, except that I constructed my own base image instead of relying on modifying a MatrixDS image. I also wanted to build these images by hand as my set of tools, even if the tools were largely similar to the MatrixDS stack. From whatever I've learned of Docker - the MatrixDS stack is quite efficient and the cascading + common dependency layer makes sense to use. There may be other methods, but this certainly appeared technically sensible.

The main containers to be aware of, and also hosted on dockerhub are :

shrysr/asmith:v1
shrysr/rbase:v2
shrysr/rstudio:v2
shrysr/shiny:v2
One of the earlier versions created is at shrysr/datasciencer, however, this has been superceded by the above images, and may grow into something different.

Note the tags to be used with the images.

The rbase image is built on the first asmith image. The RStudio and Shiny images are based of a common rbase dependency environment. However, additional packages can be specified for these, and it is not necessary to rebuild the rbase layer each time.

Launching the docker containers

The easiest way to launch is to use the docker-compose file.

Starting an rstudio service is as simple as:

docker-compose up rstudio

Replace rstudio with shiny above to launch the shiny server.

Note that the docker-compose setup involves using a fully specified project path. This is set to a generic path and the system has been tested on a Mac OS and several compute instances of Linux running Debian and Ubuntu.

Docker Compose setup

The purpose of the docker container to is make the environment variables and other settings like volume names and ports to be conveniently configured.

There are 2 services : rstudio server and a shiny server. The default up command will launch both of them. Individual services can be launched using their names.

It would b a good practice to name the containers based on the project so as to be able to distinguish different containers.

version: "2"

services:
  rstudio:
    image: shrysr/rstudio:v2
    container_name: rstudio_s
    environment:
      - PASSWORD=shreyas
      - DISABLE_AUTH=false
      - WORKDIR="/home/rstudio/"
    restart: always
    volumes:
      - /Users/shrysr/docker-testing-sr/:/home/rstudio/
    ports:
      - "8787:8787"

  shiny:
    image: shrysr/shiny:v2
    container_name: shiny
    ports:
      - "3838:3838"
    restart: always
    volumes:
     - /Users/shrysr/docker-testing-sr/shiny-server/:/srv/shiny-server/

YAML

Travis

This travis file uses the docker service specification to start the docker service. This can be viewed by the systemctl start command in the logs. The build is designed in stages, due to the cascading image dependency. However, the rstudio and shiny images can be constructed in parallel and actually do not take long.

Note that the entire build does not complete on Travis at the moment because of limitations in the free tier of computing time. However, the builds do complete on Github Acions described subsequently.

services:
  - docker

jobs:
  include:
    - stage: asmith
      script: docker build asmith/. -t shrysr/asmith:v1
    - stage: rbase
      script: docker build rbase/. -t shrysr/rbase:v2
    - stage: rstudio-and-shiny
      script: docker build rstudio/. -t shrysr/rstudio:v2
      script: docker build shiny/. -t shrysr/shiny:v2

Github Workflows

ASmith YAML for CI with github

name: Docker Image CI

on:
  push:
    paths:
    - '!/docs/*'
    - '!Readme.*'
    - '!*.md'
    - '!*.org'

jobs:

  build:

    runs-on: ubuntu-18.04

    steps:
    - uses: actions/checkout@v1
    - name: Build Asmith
      run: docker build asmith/. --file asmith/Dockerfile --tag my-image-name:$(date +%s)

rbase YAML for CI with github

name: Docker Image CI

on:
  push:
    paths:
    - '!/docs/*'
    - '!Readme.*'
    - '!*.md'
    - '!*.org'

jobs:

  build:

    runs-on: ubuntu-18.04

    steps:
    - uses: actions/checkout@v1
    - name: Build rbase
      run: docker build rbase/. --file rbase/Dockerfile --tag my-image-name:$(date +%s)

Rstudio YAML for CI with github

name: Docker Image CI

on:
  push:
    paths:
    - '!/docs/*'
    - '!Readme.*'
    - '!*.md'
    - '!*.org'

jobs:

  build:

    runs-on: ubuntu-18.04

    steps:
    - uses: actions/checkout@v1
    - name: Build rstudio
      run: docker build rstudio/. --file rstudio/Dockerfile --tag my-image-name:$(date +%s)

Shiny YAML for CI with github

name: Docker Image CI

on:
  push:
    paths:
    - '!/docs/*'
    - '!Readme.*'
    - '!*.md'
    - '!*.org'

jobs:

  build:

    runs-on: ubuntu-18.04

    steps:
    - uses: actions/checkout@v1
    - name: Build shiny
      run: docker build shiny/. --file shiny/Dockerfile --tag my-image-name:$(date +%s)

ASmith

This is the very first layer. This layer adds several OS packages and starts with a specific version of Ubuntu (v18.04). Currently, it is largely left the same except for adding the package dtrx, which is useful to quickly zip and unzip files.

This layer does not take very long to build, however, if it is - then all the other subsequent layers will probably need to be rebuilt.

Dockerfile

FROM ubuntu:18.04

LABEL maintainer="Shreyas Ragavan <[email protected]>" \
	version="1.0"

USER root

ENV DEBIAN_FRONTEND noninteractive

RUN apt-get update

# Install all basic OS dependencies
RUN apt-get update \
  && apt-get install -yq --no-install-recommends \
    apt \
    apt-utils \
    bash-completion \
    build-essential \
    byacc \
    bzip2 \
    ca-certificates \
    emacs \
    file \
    flex \
    fonts-dejavu \
    fonts-liberation \
    fonts-texgyre \
    g++ \
    gcc \
    gettext \
    gfortran \
    git \
    gnupg2 \
    gsfonts \
    hdf5-tools \
    icu-devtools \
    jed \
    lmodern \
    locales \
    make \
    mesa-common-dev \
    nano \
    netcat \
    openjdk-8-jdk \
    pandoc \
    software-properties-common \
    sudo \
    texlive-fonts-extra \
    texlive-fonts-recommended \
    texlive-generic-recommended \
    texlive-latex-base \
    texlive-latex-extra \
    texlive-xetex \
    tzdata \
    unzip \
    vim \
    wget \
    zip \
	libsodium-dev \
  && echo "en_US.UTF-8 UTF-8" >> /etc/locale.gen \
  && locale-gen en_US.utf8 \
  && /usr/sbin/update-locale LANG=en_US.UTF-8

# make the "en_US.UTF-8" locale so postgres will be utf-8 enabled by default
ENV LANG=en_US.utf8 \
    LC_ALL=en_US.UTF-8 \
    TERM=xterm \
    APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=1

# Install additional libraries
RUN apt-get install -yq --no-install-recommends \
    libblas-dev \
    libcurl4 \
    libcurl4-gnutls-dev \
    libgdal-dev \
    libglu1-mesa-dev \
    libgmp3-dev \
    libicu60 \
    libjpeg-turbo8 \
    libmagick++-dev \
    libmariadb-client-lgpl-dev \
    libmpfr-dev \
    libmpfr-dev \
    libncurses5-dev \
    libnettle6 \
    libnlopt-dev \
    libopenblas-dev \
    libpango1.0-0 \
    libpangocairo-1.0-0 \
    libpng16-16 \
    libpq-dev \
    libsasl2-dev \
    libsm6 \
    libssl-dev \
    libtiff5 \
    libtool \
    libudunits2-dev \
    libxext-dev \
    libxml2-dev \
    libxrender1 \
    zlib1g-dev \
	dtrx

# Set timezone noninteractively
RUN ln -fs /usr/share/zoneinfo/US/Pacific /etc/localtime

# Python stuff
RUN apt-get install -y --no-install-recommends \
    python-pip \
    python-setuptools \
    python-wheel \
    python-dev \
    python3-pip \
    python3-setuptools \
    python3-wheel \
    python3-dev \
  && apt-get clean

#install git, vim

RUN apt-get install -y git \
	                   vim \
                       curl

#install kaggle cli
RUN pip install kaggle dvc tensorflow keras pandas

#mongo cli
RUN apt-get install -y mongodb-clients

#mysql shell
RUN apt-get install -y mysql-client

#postgre shell
RUN apt-get install -y postgresql-client

# Add Tini
ENV TINI_VERSION v0.18.0
ADD https://github.com/krallin/tini/releases/download/${TINI_VERSION}/tini /tini
RUN chmod +x /tini
ENTRYPOINT ["/tini", "--"]

RUN apt-get clean \
  && rm -rf /var/lib/apt/lists/*

rbase

This layer contains all the basic R packages required for datascience and ML. A bunch of packages were added to the already extensive default list of packages in MatrixDS's docker file.

The packages are defined in an R script called packages.R.

This layer takes a tremendously long time to build. A couple of hours on a Macbook Pro 2019, with 6 cores and 32 GB of RAM. One should be careful in assessing whether this layer has to be disturbed. Automated builds on Dockerhub are likely to take even longer.

Note: As such the dockerfile indicates that the packages are called in the last 2 layers only. It may be possible that subsequent image builds do not take as much time as I imagine.

It may be easier to find a way to keep the additional packages specified in the rstudio and shiny package list to be in sync.

R package list - BASE

This is a list of the basic packages being installed. These conver many commonly used libraries for data science. This layer will take a Long time to install.

Do not install custom libraries to this layer. Install in the next layer.

#Script for common package installation on MatrixDS docker image
p<-c('nnet','kknn','randomForest','xgboost','tidyverse','plotly','shiny','shinydashboard',
	  'devtools','FinCal','googleVis','DT', 'kernlab','earth',
     'htmlwidgets','rmarkdown','lubridate','leaflet','sparklyr','magrittr','openxlsx',
     'packrat','roxygen2','knitr','readr','readxl','stringr','broom','feather',
     'forcats','testthat','plumber','RCurl','rvest','mailR','nlme','foreign','lattice',
     'expm','Matrix','flexdashboard','caret','mlbench','plotROC','RJDBC','rgdal',
     'highcharter','tidyquant','timetk','quantmod','PerformanceAnalytics','scales',
     'tidymodels','C50', 'parsnip','rmetalog','reticulate','umap', 'glmnet', 'easypackages', 'drake', 'shinythemes', 'shinyjs', 'recipes', 'rsample', 'rpart.plot', 'remotes', 'DataExplorer', 'inspectdf', 'janitor', 'mongolite', 'jsonlite', 'config' )


install.packages(p,dependencies = TRUE)

R Package list - CUSTOM

Add your custom packages to this layer. In this way, only the additional packages are installed in a new layer.

#Script for common package installation on MatrixDS docker image
PKGS <- c(
      "tidyverse", "mapproj", "maps", "genius", "shinycssloaders", "gmailr"
)

install.packages(PKGS, dependencies = TRUE)

# These packages are sometimes not available for the current R version
# , and therefore installed directly from github
devtools::install_github("tidyverse/googlesheets4", dependencies = TRUE)
devtools::install_github("PMassicotte/gtrendsR", dependencies = TRUE)

Dockerfile

FROM shrysr/asmith:v1

LABEL maintainer="Shreyas Ragavan <[email protected]>" \
	version="1.0"

#install some helper python packages
RUN pip install sympy numpy

# R Repo, see https://cran.r-project.org/bin/linux/ubuntu/README.html
RUN echo 'deb https://cloud.r-project.org/bin/linux/ubuntu bionic-cran35/' >> /etc/apt/sources.list
RUN apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys E298A3A825C0D65DFD57CBB651716619E084DAB9
RUN add-apt-repository ppa:marutter/c2d4u3.5

# R-specific packages
RUN apt-get update \
  && apt-get install -y --no-install-recommends \
    r-base \
    r-base-core \
    r-recommended \
    r-base-dev \
    r-cran-boot \
    r-cran-class \
    r-cran-cluster \
    r-cran-codetools \
    r-cran-foreign \
    r-cran-kernsmooth \
    r-cran-matrix \
    r-cran-rjava \
    r-cran-rpart \
    r-cran-spatial \
    r-cran-survival

COPY packages.R /usr/local/lib/R/packages.R
COPY custom_packages.R /usr/local/lib/R/custom_packages.R

# Install Basic R packages for datascience and ML
RUN R CMD javareconf && \
    Rscript /usr/local/lib/R/packages.R

# Though this has been installed upstream, apprently it has to be setup again.
RUN apt-get update \
&& apt-get install -y --no-install-recommends libsodium-dev

# Install custom set of R packages. This is on a separate layer for efficient image construction
RUN Rscript /usr/local/lib/R/custom_packages.R

*

Shiny

Overview of the process:

Suppose you have a project folder within which related scripts, shiny apps, etc live. This directory is mounted as a volume to the docker container. The docker container will check for the presence of a folder called shiny-server and if not available, will create it. Even if the folder is available, the contents of test_apps will be copied into the image.

Into the shiny-server folder, the test_apps folder containing shiny apps for testing are copied.

Environment and Profile

R_LIBS=/usr/local/lib/R/site-library:/usr/local/lib/R/library:/usr/lib/R/library:/srv/R/library

.libPaths("/srv/R/library/")

# Things you might want to change
# options(papersize="a4")
# options(editor="notepad")
# options(pager="internal")

# R interactive prompt
# options(prompt="> ")
# options(continue="+ ")

# to prefer Compiled HTML
help options(chmhelp=TRUE)
# to prefer HTML help
# options(htmlhelp=TRUE)

# General options
options(tab.width = 4)
options(width = 130)
options(graphics.record=TRUE)

.First <- function(){
 library(Hmisc)
 library(R2HTML)
 cat("\nWelcome at", date(), "\n")
}

.Last <- function(){
 cat("\nGoodbye at ", date(), "\n")
}

app.r

#
# This is a Shiny web application on MatrixDS.
#
# Find out more about building applications with Shiny here:
#
#    http://shiny.rstudio.com/
#

##########################################################################################
# This points the Shiny server tool to any libraries installed with RStudio
# that means that any library you install on your RStudio instance in this project,
# will be available to the shiny server
##########################################################################################

.libPaths( c( .libPaths(), "/srv/.R/library") )

##########################################################################################
# Here you can call all the required libraries for your code to run
##########################################################################################

library(shiny)

##########################################################################################
# For deploying tools on MatrixDS, we created this production variable
# when set to true, your shiny app will run on the shiny server tool upon clicking open
# when set to false, your shiny app will run when you hit the "Run App" button on RStudio
##########################################################################################

production <- TRUE

##########################################################################################
# The shiny server tool uses a different absolute path than RStudio.
# this if statement denotes the correct path for the 2 values of the production variable
##########################################################################################

if(production == FALSE) {
  #if you using the RStudio tool
  shiny_path <- "~/shiny-server/"
  home_path <- "~/"
} else {
  #if you are using the shiny tool
  shiny_path <- "/srv/shiny-server/"
  home_path <- "/srv/"
}

##########################################################################################
# To call a file/artifact in your MatrixDS project use the following line of code
# this example uses the function read.csv
#  my_csv <- read.csv(paste0(home_path,"file_name.csv"))
##########################################################################################

# Define UI for application that draws a histogram
ui <- fluidPage(

   # Application title
   titlePanel("Old Faithful Geyser Data"),

   # Sidebar with a slider input for number of bins
   sidebarLayout(
      sidebarPanel(
         sliderInput("bins",
                     "Number of bins:",
                     min = 1,
                     max = 50,
                     value = 30)
      ),

      # Show a plot of the generated distribution
      mainPanel(
         plotOutput("distPlot")
      )
   )
)

# Define server logic required to draw a histogram
server <- function(input, output) {

   output$distPlot <- renderPlot({
      # generate bins based on input$bins from ui.R
      x    <- faithful[, 2]
      bins <- seq(min(x), max(x), length.out = input$bins + 1)

      # draw the histogram with the specified number of bins
      hist(x, breaks = bins, col = 'darkgray', border = 'white')
   })
}

# Run the application
shinyApp(ui = ui, server = server)

shiny server script

This is script to execute or run the shiny server. Apparently, it is necessary to be called via script in this fashion for the process to work, rather than the docker file itself. In a way this helps keeping the code modular. It is generally unlikely any changes would be needed here.

#!/bin/sh

# Make sure the directory for individual app logs exists
mkdir -p /var/log/shiny-server
chown shiny.shiny /var/log/shiny-server

if [ "$APPLICATION_LOGS_TO_STDOUT" = "false" ];
then
    exec shiny-server 2>&1
else
    # start shiny server in detached mode
    exec shiny-server 2>&1 &

    # push the "real" application logs to stdout with xtail
    exec xtail /var/log/shiny-server/
fi

packages

#Script for common package installation on MatrixDS docker image
p<-c('reticulate')


install.packages(p,dependencies = TRUE)

version

Dockerfile

The folder test_apps will contain shiny apps meant to test functionality. This is copied into the docker image.

[2020-01-08 Wed] During the image build, there were messages that the rmarkdown and shiny libraries could not be installed for this version of R. However, the shiny apps do display in the browser. This needs to be investigated.

Changes: Reduced a step and added the tree package. This makes it easier to troubleshoot.

FROM shrysr/rbase:v2

LABEL maintainer="Shreyas Ragavan <[email protected]>" \
	version="2.0"

COPY packages.R /usr/local/lib/R/packages.R

#install R packages
RUN R CMD javareconf && \
    Rscript /usr/local/lib/R/packages.R

RUN apt-get update && apt-get install -y \
    gdebi-core \
    pandoc \
    pandoc-citeproc \
    libcurl4-gnutls-dev \
    libcairo2-dev \
    libxt-dev \
    xtail \
	tree

COPY entrypoint.sh /entrypoint.sh
RUN mkdir -p /root/shiny-server/  \
	&&  mkdir -p /root/shiny-server/test_shiny/

COPY test_apps/ /root/shiny-server/test_shiny/


# Download and install shiny server
RUN wget --no-verbose https://download3.rstudio.org/ubuntu-14.04/x86_64/VERSION -O "version.txt" && \
    VERSION=$(cat version.txt)  && \
    wget --no-verbose "https://download3.rstudio.org/ubuntu-14.04/x86_64/shiny-server-$VERSION-amd64.deb" -O ss-latest.deb && \
    gdebi -n ss-latest.deb && \
    rm -f version.txt ss-latest.deb && \
    . /etc/environment && \
    R -e "install.packages(c('shiny', 'rmarkdown'), repos='$MRAN')" && \
    cp -R /usr/local/lib/R/site-library/shiny/examples/* /srv/shiny-server/

RUN \
  apt-get update && apt-get install -y && \
  DEBIAN_FRONTEND=noninteractive apt install --no-install-recommends -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" \
    default-jre default-jdk \
    && apt-get clean && \
  usermod -u 1100 shiny && \
  groupmod -g 1100 shiny && \
  chown -R shiny:shiny /srv && \
  chown -R shiny:shiny /srv && \
  chmod +x /entrypoint.sh


COPY shiny-server.sh /usr/bin/shiny-server.sh
#CMD ["sh", "/usr/bin/shiny-server.sh"]
ENTRYPOINT ["sh", "-c", "/entrypoint.sh >>/var/log/stdout.log 2>>/var/log/stderr.log"]

entrypoint

The dockerfile copied the contents of test_apps into the root/shiny-server/test_shiny directory. Now via shell script (entrypoint.sh), the contents from root/shiny-server/test_shiny within the container are copied in a folder called /srv/shiny-server within the container. Now the final /srv/shiny-server is matched with the specified mount volume.

#!/bin/bash

mkdir -p /srv/shiny-server
mkdir -p /srv/.R/library
[ -f  /srv/.Rprofile ] || echo '.libPaths("/srv/.R/library/")' > /srv/.Rprofile
[ -f  /srv/.Renvron ] || echo 'R_LIBS=/usr/local/lib/R/site-library:/usr/local/lib/R/library:/usr/lib/R/library:/srv/.R/library
' > /srv/.Renvron

if [ ! -d "/srv/shiny-server" ]
then
  mkdir -p /srv/shiny-server
  cp -r /root/shiny-server/test_shiny/ /srv/shiny-server/
else
  if [ ! "$(ls -A /srv/shiny-server)" ]
   then
     cp -r /root/shiny-server/test_shiny/ /srv/shiny-server/
  fi
fi

sh /usr/bin/shiny-server.sh

Container launch and image build command samples

The local path should be the outermost project folder. Any location specified will have a folder created shiny-server within which the shiny test apps will be placed. Note that the correct tag version should be substituted.

docker container run -itd --rm -p 3838:3838 -v /Users/shrysr/my_projects/sr-ds-docker/:/srv shrysr/shiny:v2

docker ps

docker kill wizardly_kirch

docker image build . -t shrysr/shiny:v2

docker exec -it  inspiring_grothendieck /bin/bash

Rstudio

This layer contains a specified RStudio version built on top of the rbase layer. i.e all the R packages defined in the earlier layers will be available to this web based deployment of Rstudio server.

By default, the authentication is bypassed, though the password can be set via the ENV specification.

Environment and Profile

R_LIBS=/usr/local/lib/R/site-library:/usr/local/lib/R/library:/usr/lib/R/library:/home/rstudio/.R/library

.libPaths("/home/rstudio/.R/library")

# Things you might want to change
# options(papersize="a4")
# options(editor="notepad")
# options(pager="internal")

# R interactive prompt
# options(prompt="> ")
# options(continue="+ ")

# to prefer Compiled HTML
#help options(chmhelp=TRUE)

# to prefer HTML help
options(htmlhelp=TRUE)

# General options
options(tab.width = 4)
options(width = 130)
options(graphics.record=TRUE)

 cat("\nWelcome at", date(), "\n")
}

.Last <- function(){
 cat("\nGoodbye at ", date(), "\n")
}

Add shiny

#!/usr/bin/with-contenv bash

ADD=${ADD:=none}

## A script to add shiny to an rstudio-based rocker image.

if [ "$ADD" == "shiny" ]; then
  echo "Adding shiny server to container..."
  apt-get update && apt-get -y install \
    gdebi-core \
    libxt-dev && \
    wget --no-verbose https://s3.amazonaws.com/rstudio-shiny-server-os-build/ubuntu-12.04/x86_64/VERSION -O "version.txt" && \
    VERSION=$(cat version.txt)  && \
    wget --no-verbose "https://s3.amazonaws.com/rstudio-shiny-server-os-build/ubuntu-12.04/x86_64/shiny-server-$VERSION-amd64.deb" -O ss-latest.deb && \
    gdebi -n ss-latest.deb && \
    rm -f version.txt ss-latest.deb && \
    install2.r -e shiny rmarkdown && \
    cp -R /usr/local/lib/R/site-library/shiny/examples/* /srv/shiny-server/ && \
    rm -rf /var/lib/apt/lists/* && \
    mkdir -p /var/log/shiny-server && \
    chown shiny.shiny /var/log/shiny-server && \
    mkdir -p /etc/services.d/shiny-server && \
    cd /etc/services.d/shiny-server && \
    echo '#!/bin/bash' > run && echo 'exec shiny-server > /var/log/shiny-server.log' >> run && \
    chmod +x run && \
    adduser rstudio shiny && \
    cd /
fi

if [ $"$ADD" == "none" ]; then
       echo "Nothing additional to add"
fi

Encrypted sign in

<!DOCTYPE html>

<!--
#
# encrypted-sign-in.htm
#
# Copyright (C) 2009-17 by RStudio, Inc., MatrixDS
#
# This program is licensed to you under the terms of version 3 of the
# GNU Affero General Public License. This program is distributed WITHOUT
# ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THOSE OF NON-INFRINGEMENT,
# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Please refer to the
# AGPL (http://www.gnu.org/licenses/agpl-3.0.txt) for more details.
#
-->
<html>
<head>
<script type="text/javascript" src="/js/encrypt.min.js"></script>
<script type="text/javascript">
function prepare() {

   try {
      var payload = "rstudio" + "\n" + "matrix";
      var xhr = new XMLHttpRequest();
      xhr.open("GET", "/auth-public-key", true);
      xhr.onreadystatechange = function() {
         try {
            if (xhr.readyState == 4) {
               if (xhr.status != 200) {
                  var errorMessage;
                  if (xhr.status == 0)
                     errorMessage = "Error: Could not reach server--check your internet connection";
                  else
                     errorMessage = "Error: " + xhr.statusText;

                  if (typeof(errorp.innerText) == 'undefined')
                     console.log(errorMessage);
                  else
                     console.log(errorMessage);
               }
               else {
                  var response = xhr.responseText;
                  var chunks = response.split(':', 2);
                  var exp = chunks[0];
                  var mod = chunks[1];
                  var encrypted = encrypt(payload, exp, mod);
                  document.getElementById('persist').value = 1;
                  document.getElementById('package').value = encrypted;
                  document.getElementById('clientPath').value = window.location.pathname;
                  document.realform.submit();
               }
            }
         } catch (exception) {
            console.log("Error: " + exception);
         }
      };
      xhr.send(null);
   } catch (exception) {
      console.log("Error: " + exception);
   }
}
function submitRealForm() {
   if (prepare())
      document.realform.submit();
}
</script>

</head>
<form action="auth-do-sign-in" name="realform" method="POST">
   <input type="hidden" name="persist" id="persist" value=""/>
   <input type="hidden" name="appUri" value=""/>
   <input type="hidden" name="clientPath" id="clientPath" value=""/>
   <input id="package" type="hidden" name="v" value=""/>
</form>
<script>
  submitRealForm();
</script>
</body>
</html>

Entrypoint

#!/bin/bash -e

mkdir -p /home/rstudio/.R/library

#cp /home/README.txt /home/rstudio/README.txt

chown -R rstudio:rstudio /home/rstudio/.R
[ -f  /home/rstudio/.Rprofile ] || echo '.libPaths("/home/rstudio/.R/library")' > /home/rstudio/.Rprofile
chown rstudio:rstudio /home/rstudio/.Rprofile
[ -f  /home/rstudio/.Renvron ] || echo 'R_LIBS=/usr/local/lib/R/site-library:/usr/local/lib/R/library:/usr/lib/R/library:/home/rstudio/.R/library
' > /home/rstudio/.Renvron
chown rstudio:rstudio /home/rstudio/.Renvron
#start RStudio
/init

nginx conf

http {

  map $http_upgrade $connection_upgrade {
      default upgrade;
      ''      close;
    }

  server {
    listen 80;

    location / {
      proxy_pass http://localhost:8787;
      proxy_redirect http://localhost:8787/ $scheme://$http_host/;
      proxy_http_version 1.1;
      proxy_set_header Upgrade $http_upgrade;
      proxy_set_header Connection $connection_upgrade;
      proxy_read_timeout 20d;
    }
  }
}

Additional Packages

#Script for common package installation on MatrixDS docker image
p<-c('reticulate')


install.packages(p,dependencies = TRUE)

PAM helper

#!/usr/bin/env sh

## Enforces the custom password specified in the PASSWORD environment variable
## The accepted RStudio username is the same as the USER environment variable (i.e., local user name).

set -o nounset

IFS='' read -r password

[ "${USER}" = "${1}" ] && [ "${PASSWORD}" = "${password}" ]

User settings

alwaysSaveHistory="0"
loadRData="0"
saveAction="0"

Userconf

#!/usr/bin/with-contenv bash

## Set defaults for environmental variables in case they are undefined
USER=${USER:=rstudio}
PASSWORD=${PASSWORD:=rstudio}
USERID=${USERID:=1000}
GROUPID=${GROUPID:=1000}
ROOT=${ROOT:=FALSE}
UMASK=${UMASK:=022}

## Make sure RStudio inherits the full path
echo "PATH=${PATH}" >> /usr/local/lib/R/etc/Renviron

bold=$(tput bold)
normal=$(tput sgr0)


if [[ ${DISABLE_AUTH,,} == "true" ]]
then
	mv /etc/rstudio/disable_auth_rserver.conf /etc/rstudio/rserver.conf
	echo "USER=$USER" >> /etc/environment
fi



if grep --quiet "auth-none=1" /etc/rstudio/rserver.conf
then
	echo "Skipping authentication as requested"
elif [ "$PASSWORD" == "rstudio" ]
then
    printf "\n\n"
    tput bold
    printf "\e[31mERROR\e[39m: You must set a unique PASSWORD (not 'rstudio') first! e.g. run with:\n"
    printf "docker run -e PASSWORD=\e[92m<YOUR_PASS>\e[39m -p 8787:8787 rocker/rstudio\n"
    tput sgr0
    printf "\n\n"
    exit 1
fi

if [ "$USERID" -lt 1000 ]
# Probably a macOS user, https://github.com/rocker-org/rocker/issues/205
  then
    echo "$USERID is less than 1000"
    check_user_id=$(grep -F "auth-minimum-user-id" /etc/rstudio/rserver.conf)
    if [[ ! -z $check_user_id ]]
    then
      echo "minumum authorised user already exists in /etc/rstudio/rserver.conf: $check_user_id"
    else
      echo "setting minumum authorised user to 499"
      echo auth-minimum-user-id=499 >> /etc/rstudio/rserver.conf
    fi
fi

if [ "$USERID" -ne 1000 ]
## Configure user with a different USERID if requested.
  then
    echo "deleting user rstudio"
    userdel rstudio
    echo "creating new $USER with UID $USERID"
    useradd -m $USER -u $USERID
    mkdir /home/$USER
    chown -R $USER /home/$USER
    usermod -a -G staff $USER
elif [ "$USER" != "rstudio" ]
  then
    ## cannot move home folder when it's a shared volume, have to copy and change permissions instead
    cp -r /home/rstudio /home/$USER
    ## RENAME the user
    usermod -l $USER -d /home/$USER rstudio
    groupmod -n $USER rstudio
    usermod -a -G staff $USER
    chown -R $USER:$USER /home/$USER
    echo "USER is now $USER"
fi

if [ "$GROUPID" -ne 1000 ]
## Configure the primary GID (whether rstudio or $USER) with a different GROUPID if requested.
  then
    echo "Modifying primary group $(id $USER -g -n)"
    groupmod -g $GROUPID $(id $USER -g -n)
    echo "Primary group ID is now custom_group $GROUPID"
fi

## Add a password to user
echo "$USER:$PASSWORD" | chpasswd

# Use Env flag to know if user should be added to sudoers
if [[ ${ROOT,,} == "true" ]]
  then
    adduser $USER sudo && echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers
    echo "$USER added to sudoers"
fi

## Change Umask value if desired
if [ "$UMASK" -ne 022 ]
  then
    echo "server-set-umask=false" >> /etc/rstudio/rserver.conf
    echo "Sys.umask(mode=$UMASK)" >> /home/$USER/.Rprofile
fi

## add these to the global environment so they are avialable to the RStudio user
echo "HTTR_LOCALHOST=$HTTR_LOCALHOST" >> /etc/R/Renviron.site
echo "HTTR_PORT=$HTTR_PORT" >> /etc/R/Renviron.site

Dockerfile

FROM shrysr/rbase:v2

ARG RSTUDIO_VERSION
ENV PATH=/usr/lib/rstudio-server/bin:$PATH

#Creating etc folder at /usr/local/lib/R/ location Searce
RUN mkdir -p /usr/local/lib/R/etc

## Download and install RStudio server & dependencies
## Attempts to get detect latest version, otherwise falls back to version given in $VER
## Symlink pandoc, pandoc-citeproc so they are available system-wide
RUN apt-get update \
  && apt-get install -y --no-install-recommends \
#    file \
    libapparmor1 \
    libcurl4-openssl-dev \
    libedit2 \
    lsb-release \
    psmisc \
    libclang-dev \
  && wget -O libssl1.0.0.deb http://ftp.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1+deb8u8_amd64.deb \
  && dpkg -i libssl1.0.0.deb \
  && rm libssl1.0.0.deb \
  && RSTUDIO_LATEST=$(wget --no-check-certificate -qO- https://s3.amazonaws.com/rstudio-server/current.ver) \
  && [ -z "$RSTUDIO_VERSION" ] && RSTUDIO_VERSION=$RSTUDIO_LATEST || true \
  # hard code the latest v1.2
  && wget -q https://s3.amazonaws.com/rstudio-ide-build/server/bionic/amd64/rstudio-server-1.2.1511-amd64.deb \
  && dpkg -i rstudio-server-1.2.1511-amd64.deb \
  #use this for latest
 # && wget -q http://download2.rstudio.org/rstudio-server-${RSTUDIO_VERSION}-amd64.deb \
 # && dpkg -i rstudio-server-${RSTUDIO_VERSION}-amd64.deb \
  && rm rstudio-server-*-amd64.deb \
  # ## Symlink pandoc & standard pandoc templates for use system-wide
  && ln -Ffs /usr/lib/rstudio-server/bin/pandoc/pandoc /usr/local/bin \
  && ln -Ffs /usr/lib/rstudio-server/bin/pandoc/pandoc-citeproc /usr/local/bin \
  && git clone https://github.com/jgm/pandoc-templates \
  && mkdir -p /opt/pandoc/templates \
  && cp -r pandoc-templates*/* /opt/pandoc/templates && rm -rf pandoc-templates* \
  && mkdir -p /root/.pandoc \
  && ln -Ffs /opt/pandoc/templates /root/.pandoc/templates \
  && apt-get clean \
  && rm -rf /var/lib/apt/lists/ \
  ## RStudio wants an /etc/R, will populate from $R_HOME/etc
  && mkdir -p /etc/R \
  ## Write config files in $R_HOME/etc
  && echo '\n\
    \n# Configure httr to perform out-of-band authentication if HTTR_LOCALHOST \
    \n# is not set since a redirect to localhost may not work depending upon \
    \n# where this Docker container is running. \
    \nif(is.na(Sys.getenv("HTTR_LOCALHOST", unset=NA))) { \
    \n  options(httr_oob_default = TRUE) \
    \n}' >> /usr/local/lib/R/etc/Rprofile.site \
  && echo "PATH=${PATH}" >> /usr/local/lib/R/etc/Renviron \
  ## Need to configure non-root user for RStudio
  && useradd rstudio \
  && echo "rstudio:matrix" | chpasswd \
	&& mkdir /home/rstudio \
	&& chown rstudio:rstudio /home/rstudio \
	&& addgroup rstudio staff \
  ## Prevent rstudio from deciding to use /usr/bin/R if a user apt-get installs a package
	##  &&  echo 'rsession-which-r=/usr/bin/R' >> /etc/rstudio/rserver.conf \
  ## use more robust file locking to avoid errors when using shared volumes:
#  && echo 'lock-type=advisory' >> /etc/rstudio/file-locks \
  ## configure git not to request password each time
  && git config --system credential.helper 'cache --timeout=3600' \
  && git config --system push.default simple \
  ## Set up S6 init system
  && wget -P /tmp/ https://github.com/just-containers/s6-overlay/releases/download/v1.11.0.1/s6-overlay-amd64.tar.gz \
  && tar xzf /tmp/s6-overlay-amd64.tar.gz -C / \
  && mkdir -p /etc/services.d/rstudio \
  && echo '#!/usr/bin/with-contenv bash \
          \n exec /usr/lib/rstudio-server/bin/rserver --server-daemonize 0' \
          > /etc/services.d/rstudio/run \
  && echo '#!/bin/bash \
          \n rstudio-server stop' \
          > /etc/services.d/rstudio/finish

COPY userconf.sh /etc/cont-init.d/userconf

COPY pam-helper.sh /usr/lib/rstudio-server/bin/pam-helper

EXPOSE 8787

COPY user-settings /home/rstudio/.rstudio/monitored/user-settings/
# No chown will cause "RStudio Initalization Error"
# "Error occurred during the transmission"; RStudio will not load.
RUN chown -R rstudio:rstudio /home/rstudio/.rstudio


############ https://github.com/matrixds/tools/blob/master/rstudio/Dockerfile ##########

RUN \
  apt-get update && apt-get install -y && \
  DEBIAN_FRONTEND=noninteractive apt install --no-install-recommends -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" \
    default-jre default-jdk icu-devtools && apt-get clean

COPY entrypoint.sh /entrypoint.sh

#add encrypted auth html file
COPY encrypted-sign-in.htm /usr/lib/rstudio-server/www/templates/encrypted-sign-in.htm


RUN   usermod -u 1100 rstudio && \
      groupmod -g 1100 rstudio && \
      chown -R rstudio:rstudio /home/rstudio && \
      chmod +x /entrypoint.sh

ENV PASSWORD matrix
ENV DISABLE_AUTH true
ENV ROOT TRUE
WORKDIR /home/rstudio
#COPY README.txt /home/README.txt

ENTRYPOINT ["sh", "-c", "/entrypoint.sh >>/var/log/stdout.log 2>>/var/log/stderr.log"]

Container launch

docker container run -itd -p 8787:8787 -v /Users/shrysr/my_projects/sr-ds-docker/shiny-server:/home/rstudio/ shrysr/rstudio:v1

Test Shiny Apps

A bunch of apps will be included here for the purpose of quickly testing functionality of widgets and etc. As such, the sample apps with the shiny server can also be used. Here, I would like to construct specific examples to have a look on whether all the components are working as expected. Perhaps like a test suite of apps.

Widget Gallery

library(shiny)

## Define UI
ui  <- fluidPage(
  titlePanel("Basic widget exploration"),

  fluidRow(

    column(2,
           h3("buttons"),
           actionButton("action007", label ="Action"),
           br(),
           br(),
           submitButton("Submit")
           ),
    column(2,
           h3("Single Checkbox"),
           checkboxInput("checkbox", "Choice A", value = T)
           ),
    column(3,
           checkboxGroupInput("checkGroup",
                              h3("checkbox group"),
                              choices = list("Choice 1" = 1,
                                             "Choice 2" = 2,
                                             "Choice 3" = 3
                                             ),
                              selected = 1
                              )
           ),
    column(2,
           dateInput("date",
                     h3("date input"),
                     value = ""
                     )
           )

  ),
  ## Inserting another fluid row element
  fluidRow(

    column(2,
           radioButtons("radio",
                        h3("Radio Buttons"),
                        choices = list("choice 1" = 1,
                                       "choice 2" = 2,
                                       "Radio 3"  = 3
                                       ),
                        selected =1
                        )
           ),

    column(2,
           selectInput("select",
                       h3("Select box"),
                       choices = list("choice 1" = 1,
                                      "choice 2" = 2,
                                      "choice 3" = 3
                                      ),
                       selected = 1
                       )
           ),
    column(2,
           sliderInput("slider1",
                       h3("Sliders"),
                       min = 0,
                       max = 100,
                       value = 50
                       ),

           sliderInput("slider2",
                       h3("Another Slider"),
                       min = 50,
                       max = 200,
                       value = c(60,80)
                       )
           ),
    column(2,
           selectInput("selectbox1",
                     h3("select from drop down box"),
                     choices = list("choice 1" = 22,
                                    "choice 2" = 2,
                                    "choice fake 3" = 33
                                    ),
                     selected = ""
                     )
           )

  ),
  fluidRow(
    column(3,
           dateRangeInput("daterange",
                          h3("Date range input")
                          )
           ),

    column(3,
           fileInput("fileinput",
                     h3("Select File")
                     )
           ),

    column(3,
           numericInput("numinput",
                        h3("Enter numeric value"),
                        value = 10
                        )
           ),
    column(3,
           h3("help text"),
           helpText("Hello this is line one.",
                    "This is line 2..\n",
                    "This is line 3."
                    )
           )
  )
)


## Define server logic

server <- function(input, output){


}



## Run the app
shinyApp(ui = ui, server = server)

Notes

This is a collection of notes and lessons learned on different aspects of the project. My website contains some general docker related notes on other aspects and command references.

Tools and methodology

All the source code and documentation formats are generated via source code blocks inserted into Org mode documents. i.e a single Readme.org. The markdown and rst formats are generated from exporters available within Emacs, and that process can be automated.

No document can be complete without a atleast a rudimentary mention of the power of using Emacs and Org mode:

The Org mode format can be leveraged to use literate programming techniques of recording comments and notes about each dockerfile and setup within the readme document itself.

For example: since each template is under it's own Org heading, the specific heading can even be exported as a separate org file, which can be externally tangled into source files without needing the installation of Emacs.

Beyond this, tools like docker-tramp can be used with Emacs to have org babel source blocks connect directly to docker instances and have the results printed in the local buffer. This enables a standard environment for development.

Status Log

[2020-01-21 Tue]: Several packages have been added to rbase, which has been customised to load a layer of custom packages as the very last layer of the image. This saves build time significantly, because all the heavy packages are installed in a previous layer. The shiny server works as expected off the Asmith and rbase images.
[2020-01-08 Wed] : Basic MatrixDS tools have been replicated like the Asmith, rbase and shiny layers. Relatively minor package additions have been made to the asmith and rbase layers. The Rstudio layer still needs some work.
[2020-01-07 Tue] : Further efforts will be based off the Matrix DS images. Essentially, there will be a r-base image with all the package installations which will feed the other tools and containers. This ensures that all the containers rely on the same dependencies. Subsequently, only the mountpoint becomes important. This approach is better because it enables smaller containers with single critical processes rather than multiple processes.
[2020-01-03 Fri] : This dockerfile will launch a shiny server to listen at the specified port. Some additional libraries like umap, glmnet, inspectdf, DataExplorer have been added in layers. The github repo is linked to the image on dockerhub.

General Notes

Using the :latest tag for docker images is useful only for some some circumstances, because there seems to be no point in using docker images if specific versions of libraries and packages are not set and updated with care from time to time. The goal is to have reliable, working setup.
- However, atleast one image may be worth having referencing the latest version of all the libraries. This container could be used for a test to know compatibility with the latest libraries.
Dockerhub has a build feature wherein a github / bitbucket repo can be linked and each new commit will trigger a build. A specific location can also be specified for the dockerfile, or a git branch name or tag. Though caching and etc are possible, the build time appears to be no better than local build time. However, this is certainly useful for subsequent builds with minor changes. It saves the effort required to commit a new image and push it to dockerhub.
the Data Science School's docker image is useful as a comprehensive reference.
Dockerhub has a setting wherein the image can be reconstructed if the base image is updated. This is relevant for all the images in this repo, and has been set appropriately. This is just in case one forgets to push local image updates to dockerhub.
A combination of local and remote development will be required to efficiently use the resources available with Docker. Since building and pushing images is expensive - some of this work can be offset to Dockerhub, and get images built based on git commits to the source Dockerfiles. For larger and more processor intensive image construction, like that of the rbase image - it is better to construct locally and then push the image to dockerhub. In any case, all the dependent images will be necessary to launch a container.
Clearing empty images from the list:

Archive

Command snippets for launching containers

Launch a shiny container

For example, assuming your shiny app and project folder is /Users/superman/my-shiny-app/. Then a shiny server as a container can be launched as simply as:

docker container run -itd -p 3838:3838 -v /Users/superman/my-shiny-app/:/srv shrysr/shiny:v2

Multiple ports and multiple services

Example for launching a temporary shiny server with 2 ports exposed for 2 processes, and specifying the location of the apps and the logs.

#+/bin/bash
docker container run -Pit -d --rm  -p 3838:3838 -p 8787:8787 \
-v /Users/shrysr/my_projects/sr-ds-docker/test_app/:/srv/shiny-server/test_app \
-v /Users/shrysr/my_projects/sr-ds-docker/test_app/log/shiny-server/:/var/log/shiny-server/ \
shrysr/datasciencer:test

Rstudio Stable

This is written using Gigantum's docker base images as a guide. It is built in a significantly different style than the other images.

Custom R Packages

#Script for common package installation on MatrixDS docker image
p<-c('reticulate')


install.packages(p,dependencies = TRUE)

rserver.conf

server-app-armor-enabled=0
auth-minimum-user-id=100

Dockerfile

FROM shrysr/rbase:v2

LABEL maintainer="Shreyas Ragavan <[email protected]>" \
	version="1.0"

COPY packages.R /usr/local/lib/R/packages.R

#install R packages
RUN R CMD javareconf && \
	Rscript /usr/local/lib/R/packages.R

# Using variables mostly to make it obvious what needs to be updated in future
ENV RSTUDIO_SHA256=62b1fb2f6f48342518d75b6efb6e721b5a49991d1642e3b879e4c5ed03cee875 \
    RSTUDIO_VER=1.2.5033

# ENV PATH=/usr/lib/rstudio-server/bin:$PATH

#Creating etc folder at /usr/local/lib/R/ location Searce
RUN mkdir -p /usr/local/lib/R/etc

## Download and install RStudio server & dependencies
## Symlink pandoc, pandoc-citeproc so they are available system-wide
RUN apt-get update \
	&& apt-get install -y --no-install-recommends \
#    file \
	libapparmor1 \
	libcurl4-openssl-dev \
	libedit2 \
	lsb-release \
	psmisc \
	libclang-dev \
	openjdk-11-jdk \
	psmisc \
	libapparmor1 \
	libclang-dev \
	&& wget -O libssl1.0.0.deb http://ftp.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1+deb8u8_amd64.deb \
	&& dpkg -i libssl1.0.0.deb \
	&& rm libssl1.0.0.deb \
	&& wget https://download2.rstudio.org/server/bionic/amd64/rstudio-server-${RSTUDIO_VER}-amd64.deb \
    && echo $RSTUDIO_SHA256 rstudio-server-${RSTUDIO_VER}-amd64.deb | sha256sum -c \
    && apt-get install -yq --no-install-recommends ./rstudio-server-*-amd64.deb \
    && apt-get clean \
    && rm rstudio-server-*-amd64.deb \
	## Symlink pandoc & standard pandoc templates for use system-wide
	# Apparently these two need forcing
	&& ln -Ffs /usr/lib/rstudio-server/bin/pandoc/pandoc /usr/local/bin \
	&& ln -Ffs /usr/lib/rstudio-server/bin/pandoc/pandoc-citeproc /usr/local/bin \
	&& git clone https://github.com/jgm/pandoc-templates \
	&& mkdir -p /opt/pandoc/templates \
	&& cp -r pandoc-templates*/* /opt/pandoc/templates && rm -rf pandoc-templates* \
	#&& mkdir /root/.pandoc
	&& ln -s /opt/pandoc/templates /root/.pandoc/templates \
	&& apt-get clean \
	&& mkdir -p /etc/services.d/rstudio \
	&& echo '#!/usr/bin/with-contenv bash \
	\n exec /usr/lib/rstudio-server/bin/rserver --server-daemonize 0' \
	> /etc/services.d/rstudio/run \
	&& echo '#!/bin/bash \
	\n rstudio-server stop' \
	> /etc/services.d/rstudio/finish

#COPY user-settings /home/rstudio/.rstudio/monitored/user-settings/
# No chown will cause "RStudio Initalization Error"
# "Error occurred during the transmission"; RStudio will not load.
#RUN chown -R rstudio:rstudio /home/rstudio/.rstudio

# Expose port for RStudio
EXPOSE 8787

# It's best to have COPYs at the end so you can change them without a massive
# rebuild
COPY rserver.conf /etc/rstudio/rserver.conf

#ENTRYPOINT ["sh", "-c", "/entrypoint.sh >>/var/log/stdout.log 2>>/var/log/stderr.log"]

Multiple services, latest Libraries - Shiny and RStudio server

This was one of the very first images created. It works, however, it will be developed into a container that launches 2 services - a Shiny server, and an Rstudio server. In general, this is not recommended. However, I think it may be useful to have available when necessary.

Overview

Base image: rocker/shinyverse

Beyond a list of OS libraries in the basic template, the following additional libraries are installed:

pandoc
pandoc-cite
dtrx
tree

R Libraries in addition to the base template grouped into general categories:

ML

glmnet
Umap (Currently on a separate layer as it has a lot of dependencies and is a large install)
recipes
rsample
rpart.plot
caret

EDA

inspectdf
DataExplorer
janitor

Management

drake
binder
easypackages
remotes
From github: karthik/holepunch

Dockerfile

Container run command

#/bin/bash
docker container run -it --rm  -p 3838:3838 -p 8787:8787 \
-v /Users/shrysr/my_projects/sr-ds-docker/test_app/:/srv/shiny-server/test_app \
-v /Users/shrysr/my_projects/sr-ds-docker/test_app/log/shiny-server/:/var/log/shiny-server/ \
shrysr/rstudio:v1

Userconf for rstudio

Reference: https://github.com/rocker-org/rocker-versioned/blob/master/rstudio/userconf.sh

#!/usr/bin/with-contenv bash

## Set defaults for environmental variables in case they are undefined
USER=${USER:=rstudio}
PASSWORD=${PASSWORD:=rstudio}
USERID=${USERID:=1000}
GROUPID=${GROUPID:=1000}
ROOT=${ROOT:=FALSE}
UMASK=${UMASK:=022}

## Make sure RStudio inherits the full path
echo "PATH=${PATH}" >> /usr/local/lib/R/etc/Renviron

bold=$(tput bold)
normal=$(tput sgr0)


if [[ ${DISABLE_AUTH,,} == "true" ]]
then
	mv /etc/rstudio/disable_auth_rserver.conf /etc/rstudio/rserver.conf
	echo "USER=$USER" >> /etc/environment
fi



if grep --quiet "auth-none=1" /etc/rstudio/rserver.conf
then
	echo "Skipping authentication as requested"
elif [ "$PASSWORD" == "rstudio" ]
then
    printf "\n\n"
    tput bold
    printf "\e[31mERROR\e[39m: You must set a unique PASSWORD (not 'rstudio') first! e.g. run with:\n"
    printf "docker run -e PASSWORD=\e[92m<YOUR_PASS>\e[39m -p 8787:8787 rocker/rstudio\n"
    tput sgr0
    printf "\n\n"
    exit 1
fi

if [ "$USERID" -lt 1000 ]
# Probably a macOS user, https://github.com/rocker-org/rocker/issues/205
  then
    echo "$USERID is less than 1000"
    check_user_id=$(grep -F "auth-minimum-user-id" /etc/rstudio/rserver.conf)
    if [[ ! -z $check_user_id ]]
    then
      echo "minumum authorised user already exists in /etc/rstudio/rserver.conf: $check_user_id"
    else
      echo "setting minumum authorised user to 499"
      echo auth-minimum-user-id=499 >> /etc/rstudio/rserver.conf
    fi
fi

if [ "$USERID" -ne 1000 ]
## Configure user with a different USERID if requested.
  then
    echo "deleting user rstudio"
    userdel rstudio
    echo "creating new $USER with UID $USERID"
    useradd -m $USER -u $USERID
    mkdir /home/$USER
    chown -R $USER /home/$USER
    usermod -a -G staff $USER
elif [ "$USER" != "rstudio" ]
  then
    ## cannot move home folder when it's a shared volume, have to copy and change permissions instead
    cp -r /home/rstudio /home/$USER
    ## RENAME the user
    usermod -l $USER -d /home/$USER rstudio
    groupmod -n $USER rstudio
    usermod -a -G staff $USER
    chown -R $USER:$USER /home/$USER
    echo "USER is now $USER"
fi

if [ "$GROUPID" -ne 1000 ]
## Configure the primary GID (whether rstudio or $USER) with a different GROUPID if requested.
  then
    echo "Modifying primary group $(id $USER -g -n)"
    groupmod -g $GROUPID $(id $USER -g -n)
    echo "Primary group ID is now custom_group $GROUPID"
fi

## Add a password to user
echo "$USER:$PASSWORD" | chpasswd

# Use Env flag to know if user should be added to sudoers
if [[ ${ROOT,,} == "true" ]]
  then
    adduser $USER sudo && echo '%sudo ALL=(ALL) NOPASSWD:ALL' >> /etc/sudoers
    echo "$USER added to sudoers"
fi

## Change Umask value if desired
if [ "$UMASK" -ne 022 ]
  then
    echo "server-set-umask=false" >> /etc/rstudio/rserver.conf
    echo "Sys.umask(mode=$UMASK)" >> /home/$USER/.Rprofile
fi

## add these to the global environment so they are avialable to the RStudio user
echo "HTTR_LOCALHOST=$HTTR_LOCALHOST" >> /etc/R/Renviron.site
echo "HTTR_PORT=$HTTR_PORT" >> /etc/R/Renviron.site

Dockerfile

FROM rocker/shiny-verse:latest

LABEL maintainer="Shreyas Ragavan <[email protected]>" \
	version="1.0"

# System update and installing a bunch of OS libraries
RUN apt-get update -qq \
	&& apt-get -y --no-install-recommends install \
	lbzip2 \
	libfftw3-dev \
        libgdal-dev \
        libgeos-dev \
        libgsl0-dev \
        libgl1-mesa-dev \
        libglu1-mesa-dev \
        libhdf4-alt-dev \
        libhdf5-dev \
        libjq-dev \
        liblwgeom-dev \
        libpq-dev \
        libproj-dev \
        libprotobuf-dev \
        libnetcdf-dev \
        libsqlite3-dev \
        libssl-dev \
        libudunits2-dev \
        netcdf-bin \
        postgis \
        protobuf-compiler \
        sqlite3 \
        tk-dev \
        unixodbc-dev \
        libsasl2-dev \
        libv8-dev \
	libsodium-dev \
# Adding a custom list of packages from this point
        pandoc \
	pandoc-citeproc \
	dtrx \
	tree \
	libzmq3-dev \
# Removing temporary files generated after package changes
	&& rm -rf /var/lib/apt \
	&& apt-get autoclean

# Installing minimum R libraries for shiny
RUN install2.r --error --deps TRUE \
	shinyWidgets \
        shinythemes \
        shinyjs

# Intalling DB interfacing libraries
RUN install2.r --error --deps TRUE \
	mongolite \
        jsonlite \
        config

# Tidyquant and Remotes
RUN install2.r --error --deps TRUE \
	tidyquant

# Installing plotly
RUN install2.r --error --deps TRUE \
	plotly

# Separating Umap to a separate layer to save time while building the image
RUN install2.r --error --deps TRUE \
	umap

# Installing libraries for EDA
RUN install2.r --error --deps TRUE \
    	inspectdf \
	DataExplorer \
	janitor

# Installing libraries for ML
RUN install2.r --error --deps TRUE \
	glmnet \
	parsnip \
	recipes \
	rsample \
	rpart.plot \
	caret

# Installing libraries related to reproducibility DevOps, planning, package management
RUN install2.r --error --deps TRUE \
	drake \
	easypackages \
	remotes \
	&& installGithub.r karthik/holepunch

# Temp layer to be integrated into OS package layer
RUN apt-get update \
&& apt-get -y --no-install-recommends install git

# Adding Rstudio server preview version as an environment variable which can be changed.
# Reference: https://github.com/datascienceschool/docker_rpython/blob/0c01b0b52834f6b3bb8a0c930a3d43899ea60ce6/02_rpython/Dockerfile#L17

USER root
ARG PANDOC_TEMPLATES_VERSION
ENV PATH=/usr/lib/rstudio-server/bin:$PATH
ENV PANDOC_TEMPLATES_VERSION=${PANDOC_TEMPLATES_VERSION:-2.9}

ENV RSTUDIOSERVER_VERSION 1.2.5036
ENV RSTUDIO_PREVIEW YES
RUN \
apt-get update \
&& apt-get install psmisc \
&& mkdir -p /download && cd /download \
&& wget https://s3.amazonaws.com/rstudio-ide-build/server/bionic/amd64/rstudio-server-${RSTUDIOSERVER_VERSION}-amd64.deb \
# && gdebi --n rstudio-server-${RSTUDIOSERVER_VERSION}-amd64.deb \
# && rm -rf /download \
# && rm -rf /var/lib/apt \
# && apt-get autoclean \
# && rstudio-server start

#$$ if {$RSTUDIO_SERVER_ON}
# Settings for RStudio-Server
# && if [ -z "$RSTUDIO_PREVIEW" ]; \
# 	then RSTUDIO_URL="https://s3.amazonaws.com/rstudio-ide-build/server/bionic/amd64/rstudio-server-${RSTUDIOSERVER_VERSION}-amd64.deb"; \
# 	else RSTUDIO_URL="https://www.rstudio.org/download/latest/stable/server/bionic/rstudio-server-latest-amd64.deb"; fi \
  # && wget -q $RSTUDIO_URL \
	&& gdebi --n rstudio-server-${RSTUDIOSERVER_VERSION}-amd64.deb \
##  && dpkg -i rstudio-server-*-amd64.deb \
  && rm rstudio-server-*-amd64.deb \
  ## Symlink pandoc & standard pandoc templates for use system-wide
  && ln -s /usr/lib/rstudio-server/bin/pandoc/pandoc /usr/local/bin \
  && ln -s /usr/lib/rstudio-server/bin/pandoc/pandoc-citeproc /usr/local/bin \
  && git clone --recursive --branch ${PANDOC_TEMPLATES_VERSION} https://github.com/jgm/pandoc-templates \
  && mkdir -p /opt/pandoc/templates \
  && cp -r pandoc-templates*/* /opt/pandoc/templates && rm -rf pandoc-templates* \
  && mkdir /root/.pandoc && ln -s /opt/pandoc/templates /root/.pandoc/templates \
  && apt-get clean \
  && rm -rf /var/lib/apt/lists/ \
  ## RStudio wants an /etc/R, will populate from $R_HOME/etc
  && mkdir -p /etc/R \
  ## Write config files in $R_HOME/etc
  && echo '\n\
    \n# Configure httr to perform out-of-band authentication if HTTR_LOCALHOST \
    \n# is not set since a redirect to localhost may not work depending upon \
    \n# where this Docker container is running. \
    \nif(is.na(Sys.getenv("HTTR_LOCALHOST", unset=NA))) { \
    \n  options(httr_oob_default = TRUE) \
    \n}' >> /usr/local/lib/R/etc/Rprofile.site \
  && echo "PATH=${PATH}" >> /usr/local/lib/R/etc/Renviron \
  ## Need to configure non-root user for RStudio
  && useradd rstudio \
  && echo "rstudio:rstudio" | chpasswd \
	&& mkdir /home/rstudio \
	&& chown rstudio:rstudio /home/rstudio \
	&& addgroup rstudio staff \
  ## Prevent rstudio from deciding to use /usr/bin/R if a user apt-get installs a package
  &&  echo 'rsession-which-r=/usr/local/bin/R' >> /etc/rstudio/rserver.conf \
  ## use more robust file locking to avoid errors when using shared volumes:
  && echo 'lock-type=advisory' >> /etc/rstudio/file-locks \
  ## configure git not to request password each time
  && git config --system credential.helper 'cache --timeout=3600' \
  && git config --system push.default simple \
  # ## Set up S6 init system
  # && wget -P /tmp/ https://github.com/just-containers/s6-overlay/releases/download/${S6_VERSION}/s6-overlay-amd64.tar.gz \
  # && tar xzf /tmp/s6-overlay-amd64.tar.gz -C / \
  && mkdir -p /etc/services.d/rstudio \
  && echo '#!/usr/bin/with-contenv bash \
          \n## load /etc/environment vars first: \
  		  \n for line in $( cat /etc/environment ) ; do export $line ; done \
          \n exec /usr/lib/rstudio-server/bin/rserver --server-daemonize 0' \
          > /etc/services.d/rstudio/run \
  && echo '#!/bin/bash \
          \n rstudio-server stop' \
          > /etc/services.d/rstudio/finish \
  && mkdir -p /home/rstudio/.rstudio/monitored/user-settings \
  && echo 'alwaysSaveHistory="0" \
          \nloadRData="0" \
          \nsaveAction="0"' \
          > /home/rstudio/.rstudio/monitored/user-settings/user-settings \
  && chown -R rstudio:rstudio /home/rstudio/.rstudio \
	&& rstudio-server start

COPY userconf.sh /etc/cont-init.d/userconf

EXPOSE 8787

Name		Name	Last commit message	Last commit date
Latest commit History 89 Commits
.github/workflows		.github/workflows
all_inclusive_latest		all_inclusive_latest
asmith		asmith
docs		docs
img		img
rbase		rbase
rstudio		rstudio
shiny		shiny
.travis.yml		.travis.yml
README.md		README.md
README.org		README.org
docker-compose.yml		docker-compose.yml
index.rst		index.rst

shrysr/sr-ds-docker

Folders and files

Latest commit

History

Repository files navigation

TL;DR

Init

Launching the docker containers

Docker Compose setup

YAML

Travis

Github Workflows

ASmith YAML for CI with github

rbase YAML for CI with github

Rstudio YAML for CI with github

Shiny YAML for CI with github

ASmith

Dockerfile

rbase

R package list - BASE

R Package list - CUSTOM

Dockerfile

Shiny

Environment and Profile

app.r

shiny server script

packages

version

Dockerfile

entrypoint

Container launch and image build command samples

Rstudio

Environment and Profile

Add shiny

Encrypted sign in

Entrypoint

nginx conf

Additional Packages

PAM helper

User settings

Userconf

Dockerfile

Container launch

Test Shiny Apps

Widget Gallery

Notes

Tools and methodology

Status Log

General Notes

Archive

Command snippets for launching containers

Launch a shiny container

Multiple ports and multiple services

Rstudio Stable

Custom R Packages

rserver.conf

Dockerfile

Multiple services, latest Libraries - Shiny and RStudio server

Overview

Dockerfile

About

Topics

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages