[minigraph] remove number of lanes check for changing speed from 400G to 100G and set speed setting before lane reconfiguration #16452
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
… to 100G and set speed setting before lane reconfiguration (sonic-net#15721) 8111 800G interface, split to 2x400G (each has 4 lanes) fails to change interface speed from 400G to 100G during deploy mg. In minigraph.xml, the interface speed configuration is good, but fails to generate the right value to config_db.json. In order to support this SKU the speed transitioning should support both 4 lanes and 8 lanes in the port_config.ini. Why I did it before this change for a 400G to 100G transition, in all cases except when lanes are 8, we would continue and the line ports.setdefault(port_name, {})['speed'] = port_speed_png[port_name] would not be executed, hence the default speed will never be set for a case and config_db will not be updated, where speed is transitioning from 400G to 100G or 40G, but lanes are not equal to 8. In order for those cases to pass where lanes are not specifically 8, we need the change Work item tracking 24242657 Signed-off-by: vaibhav-dahiya <[email protected]>
|
@vdahiya12 can you check the build fialures? |
Signed-off-by: vaibhav-dahiya <[email protected]>
seems all check passes now @yxieca |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
… (#15721)
cherry pick conflict #15721
raising a separate PR
8111 800G interface, split to 2x400G (each has 4 lanes) fails to change interface speed from 400G to 100G during deploy mg. In minigraph.xml, the interface speed configuration is good, but fails to generate the right value to config_db.json.
In order to support this SKU the speed transitioning should support both 4 lanes and 8 lanes in the port_config.ini.
Why I did it
before this change for a 400G to 100G transition, in all cases except when lanes are 8, we would continue and the line ports.setdefault(port_name, {})['speed'] = port_speed_png[port_name] would not be executed, hence the default speed will never be set for a case and config_db will not be updated, where speed is transitioning from 400G to 100G or 40G, but lanes are not equal to 8.
In order for those cases to pass where lanes are not specifically 8, we need the change
Work item tracking
24242657
Why I did it
Work item tracking
How I did it
How to verify it
Which release branch to backport (provide reason below if selected)
Tested branch (Please provide the tested image version)
Description for the changelog
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)