Merge pull request #1 from torvalds/master

Merge

.mailmap

@@ -68,6 +68,8 @@ Jacob Shin <[email protected]>
 James Bottomley <jejb@mulgrave.(none)>
 James Bottomley <[email protected]>
 James E Wilson <[email protected]>
+James Hogan <[email protected]> <[email protected]>
+James Hogan <[email protected]> <[email protected]>
 James Ketrenos <jketreno@io.(none)>
 Javi Merino <[email protected]> <[email protected]>
 <[email protected]> <[email protected]>

CREDITS

@@ -2090,7 +2090,7 @@ S: Kuala Lumpur, Malaysia
 
 N: Mohit Kumar
 D: ST Microelectronics SPEAr13xx PCI host bridge driver
-D: Synopsys Designware PCI host bridge driver
+D: Synopsys DesignWare PCI host bridge driver
 
 N: Gabor Kuti
 E: [email protected]
@@ -2606,11 +2606,9 @@ E: [email protected]
 D: bug fixes, documentation, minor hackery
 
 N: Paul Moore
-E: [email protected]
-D: NetLabel author
-S: Hewlett-Packard
-S: 110 Spit Brook Road
-S: Nashua, NH 03062
+E: [email protected]
+W: http://www.paul-moore.com
+D: NetLabel, SELinux, audit
 
 N: James Morris
 E: [email protected]

Documentation/ABI/stable/sysfs-bus-nvmem

@@ -0,0 +1,19 @@
+What:		/sys/bus/nvmem/devices/.../nvmem
+Date:		July 2015
+KernelVersion:  4.2
+Contact:	Srinivas Kandagatla <[email protected]>
+Description:
+		This file allows user to read/write the raw NVMEM contents.
+		Permissions for write to this file depends on the nvmem
+		provider configuration.
+
+		ex:
+		hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+		0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		*
+		00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+		0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		...
+		*
+		0001000

Documentation/ABI/stable/sysfs-driver-dma-ioatdma

@@ -0,0 +1,30 @@
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        [email protected]
+Description:	Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+		DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        [email protected]
+Description:	The number of descriptors active in the ring.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        [email protected]
+Description:	Descriptor ring size, total number of descriptors available.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        [email protected]
+Description:	Version of ioatdma device.
+
+What:           sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date:           August 8, 2017
+KernelVersion:  4.14
+Contact:        [email protected]
+Description:	Tune-able interrupt delay value per channel basis.

Documentation/ABI/testing/configfs-usb-gadget-rndis

@@ -12,3 +12,6 @@ Description:
 				Ethernet over USB link
 		dev_addr	- MAC address of device's end of this
 				Ethernet over USB link
+		class		- USB interface class, default is 02 (hex)
+		subclass	- USB interface subclass, default is 06 (hex)
+		protocol	- USB interface protocol, default is 00 (hex)

Documentation/ABI/testing/ppc-memtrace

@@ -0,0 +1,45 @@
+What:		/sys/kernel/debug/powerpc/memtrace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This folder contains the relevant debugfs files for the
+		hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING
+		must be set.
+
+What:		/sys/kernel/debug/powerpc/memtrace/enable
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	Write an integer containing the size in bytes of the memory
+		you want removed from each NUMA node to this file - it must be
+		aligned to the memblock size. This amount of RAM will be removed
+		from the kernel mappings and the following debugfs files will be
+		created. This can only be successfully done once per boot. Once
+		memory is successfully removed from each node, the following
+		files are created.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This directory contains information about the removed memory
+		from the specific NUMA node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/size
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This contains the size of the memory removed from the node.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/start
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This contains the start address of the removed memory.
+
+What:		/sys/kernel/debug/powerpc/memtrace/<node-id>/trace
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:	This is where the hardware trace macro will output the trace
+		it generates.

Documentation/ABI/testing/procfs-smaps_rollup

@@ -0,0 +1,31 @@
+What:		/proc/pid/smaps_rollup
+Date:		August 2017
+Contact:	Daniel Colascione <[email protected]>
+Description:
+		This file provides pre-summed memory information for a
+		process.  The format is identical to /proc/pid/smaps,
+		except instead of an entry for each VMA in a process,
+		smaps_rollup has a single entry (tagged "[rollup]")
+		for which each field is the sum of the corresponding
+		fields from all the maps in /proc/pid/smaps.
+		For more details, see the procfs man page.
+
+		Typical output looks like this:
+
+		00100000-ff709000 ---p 00000000 00:00 0		 [rollup]
+		Rss:		     884 kB
+		Pss:		     385 kB
+		Shared_Clean:	     696 kB
+		Shared_Dirty:	       0 kB
+		Private_Clean:	     120 kB
+		Private_Dirty:	      68 kB
+		Referenced:	     884 kB
+		Anonymous:	      68 kB
+		LazyFree:	       0 kB
+		AnonHugePages:	       0 kB
+		ShmemPmdMapped:	       0 kB
+		Shared_Hugetlb:	       0 kB
+		Private_Hugetlb:       0 kB
+		Swap:		       0 kB
+		SwapPss:	       0 kB
+		Locked:		     385 kB

Documentation/ABI/testing/sysfs-block-zram

@@ -90,3 +90,11 @@ Description:
 		device's debugging info useful for kernel developers. Its
 		format is not documented intentionally and may change
 		anytime without any notice.
+
+What:		/sys/block/zram<id>/backing_dev
+Date:		June 2017
+Contact:	Minchan Kim <[email protected]>
+Description:
+		The backing_dev file is read-write and set up backing
+		device for zram to write incompressible pages.
+		For using, user should enable CONFIG_ZRAM_WRITEBACK.

Documentation/ABI/testing/sysfs-bus-iio

@@ -119,6 +119,15 @@ Description:
 		unique to allow association with event codes. Units after
 		application of scale and offset are milliamps.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_raw
+KernelVersion:	4.5
+Contact:	[email protected]
+Description:
+		Raw (unscaled no bias removal etc.) power measurement from
+		channel Y. The number must always be specified and
+		unique to allow association with event codes. Units after
+		application of scale and offset are milliwatts.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
 KernelVersion:	3.2
 Contact:	[email protected]

Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32

@@ -0,0 +1,57 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
+KernelVersion:	4.13
+Contact:	[email protected]
+Description:
+		Reading returns the current preset value. Writing sets the
+		preset value. Encoder counts continuously from 0 to preset
+		value, depending on direction (up/down).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
+KernelVersion:	4.13
+Contact:	[email protected]
+Description:
+		Reading returns the list possible quadrature modes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
+KernelVersion:	4.13
+Contact:	[email protected]
+Description:
+		Configure the device counter quadrature modes:
+		- non-quadrature:
+			Encoder IN1 input servers as the count input (up
+			direction).
+		- quadrature:
+			Encoder IN1 and IN2 inputs are mixed to get direction
+			and count.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
+KernelVersion:	4.13
+Contact:	[email protected]
+Description:
+		Reading returns the list possible active edges.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_count0_polarity
+KernelVersion:	4.13
+Contact:	[email protected]
+Description:
+		Configure the device encoder/counter active edge:
+		- rising-edge
+		- falling-edge
+		- both-edges
+
+		In non-quadrature mode, device counts up on active edge.
+		In quadrature mode, encoder counting scenarios are as follows:
+		----------------------------------------------------------------
+		| Active  | Level on |      IN1 signal    |     IN2 signal     |
+		| edge    | opposite |------------------------------------------
+		|         | signal   |  Rising  | Falling |  Rising  | Falling |
+		----------------------------------------------------------------
+		| Rising  | High ->  |   Down   |    -    |    Up    |    -    |
+		| edge    | Low  ->  |    Up    |    -    |   Down   |    -    |
+		----------------------------------------------------------------
+		| Falling | High ->  |    -     |    Up   |    -     |   Down  |
+		| edge    | Low  ->  |    -     |   Down  |    -     |    Up   |
+		----------------------------------------------------------------
+		| Both    | High ->  |   Down   |    Up   |    Up    |   Down  |
+		| edges   | Low  ->  |    Up    |   Down  |   Down   |    Up   |
+		----------------------------------------------------------------

Documentation/ABI/testing/sysfs-bus-thunderbolt

@@ -45,6 +45,8 @@ Contact:	[email protected]
 Description:	When a devices supports Thunderbolt secure connect it will
 		have this attribute. Writing 32 byte hex string changes
 		authorization to use the secure connection method instead.
+		Writing an empty string clears the key and regular connection
+		method can be used again.
 
 What:		/sys/bus/thunderbolt/devices/.../device
 Date:		Sep 2017

Documentation/ABI/testing/sysfs-bus-usb-lvstest

@@ -45,3 +45,16 @@ Contact:	Pratyush Anand <[email protected]>
 Description:
 		Write to this node to issue "U3 exit" for Link Layer
 		Validation device. It is needed for TD.7.36.
+
+What:		/sys/bus/usb/devices/.../enable_compliance
+Date:		July 2017
+Description:
+		Write to this node to set the port to compliance mode to test
+		with Link Layer Validation device. It is needed for TD.7.34.
+
+What:		/sys/bus/usb/devices/.../warm_reset
+Date:		July 2017
+Description:
+		Write to this node to issue "Warm Reset" for Link Layer Validation
+		device. It may be needed to properly reset an xHCI 1.1 host port if
+		compliance mode needed to be explicitly enabled.

Documentation/ABI/testing/sysfs-driver-altera-cvp

@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/altera-cvp/chkcfg
+Date:		May 2017
+Kernel Version:	4.13
+Contact:	Anatolij Gustschin <[email protected]>
+Description:
+		Contains either 1 or 0 and controls if configuration
+		error checking in altera-cvp driver is turned on or
+		off.

Documentation/ABI/testing/sysfs-firmware-opal-powercap

@@ -0,0 +1,31 @@
+What:		/sys/firmware/opal/powercap
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	Powercap directory for Powernv (P8, P9) servers
+
+		Each folder in this directory contains a
+		power-cappable component.
+
+What:		/sys/firmware/opal/powercap/system-powercap
+		/sys/firmware/opal/powercap/system-powercap/powercap-min
+		/sys/firmware/opal/powercap/system-powercap/powercap-max
+		/sys/firmware/opal/powercap/system-powercap/powercap-current
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	System powercap directory and attributes applicable for
+		Powernv (P8, P9) servers
+
+		This directory provides powercap information. It
+		contains below sysfs attributes:
+
+		- powercap-min : This file provides the minimum
+		  possible powercap in Watt units
+
+		- powercap-max : This file provides the maximum
+		  possible powercap in Watt units
+
+		- powercap-current : This file provides the current
+		  powercap set on the system. Writing to this file
+		  creates a request for setting a new-powercap. The
+		  powercap requested must be between powercap-min
+		  and powercap-max.

Documentation/ABI/testing/sysfs-firmware-opal-psr

@@ -0,0 +1,18 @@
+What:		/sys/firmware/opal/psr
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	Power-Shift-Ratio directory for Powernv P9 servers
+
+		Power-Shift-Ratio allows to provide hints the firmware
+		to shift/throttle power between different entities in
+		the system. Each attribute in this directory indicates
+		a settable PSR.
+
+What:		/sys/firmware/opal/psr/cpu_to_gpu_X
+Date:		August 2017
+Contact:	Linux for PowerPC mailing list <[email protected]>
+Description:	PSR sysfs attributes for Powernv P9 servers
+
+		Power-Shift-Ratio between CPU and GPU for a given chip
+		with chip-id X. This file gives the ratio (0-100)
+		which is used by OCC for power-capping.

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -57,6 +57,15 @@ Contact:	"Jaegeuk Kim" <[email protected]>
 Description:
 		 Controls the issue rate of small discard commands.
 
+What:          /sys/fs/f2fs/<disk>/discard_granularity
+Date:          July 2017
+Contact:       "Chao Yu" <[email protected]>
+Description:
+		Controls discard granularity of inner discard thread, inner thread
+		will not issue discards with size that is smaller than granularity.
+		The unit size is one block, now only support configuring in range
+		of [1, 512].
+
 What:		/sys/fs/f2fs/<disk>/max_victim_search
 Date:		January 2014
 Contact:	"Jaegeuk Kim" <[email protected]>
@@ -130,3 +139,15 @@ Date:		June 2017
 Contact:	"Chao Yu" <[email protected]>
 Description:
 		 Controls current reserved blocks in system.
+
+What:		/sys/fs/f2fs/<disk>/gc_urgent
+Date:		August 2017
+Contact:	"Jaegeuk Kim" <[email protected]>
+Description:
+		 Do background GC agressively
+
+What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
+Date:		August 2017
+Contact:	"Jaegeuk Kim" <[email protected]>
+Description:
+		 Controls sleep time of GC urgent mode

Documentation/ABI/testing/sysfs-kernel-mm-swap

@@ -0,0 +1,16 @@
+What:		/sys/kernel/mm/swap/
+Date:		August 2017
+Contact:	Linux memory management mailing list <[email protected]>
+Description:	Interface for swapping
+
+What:		/sys/kernel/mm/swap/vma_ra_enabled
+Date:		August 2017
+Contact:	Linux memory management mailing list <[email protected]>
+Description:	Enable/disable VMA based swap readahead.
+
+		If set to true, the VMA based swap readahead algorithm
+		will be used for swappable anonymous pages mapped in a
+		VMA, and the global swap readahead algorithm will be
+		still used for tmpfs etc. other users.  If set to
+		false, the global swap readahead algorithm will be
+		used for all swappable pages.