Merge pull request #2 from torvalds/master #231

jgunthorpe · 2015-12-01T19:07:46Z

sync with linus

jgunthorpe · 2015-12-01T19:09:15Z

Sorry, ignore. github error, my bad.

There is the following note in Documentation/kobject/txt: One important point cannot be overstated: every kobject must have a release() method, and the kobject must persist (in a consistent state) until that method is called. If these constraints are not met, the code is flawed. The release() method is called when the reference count reaches zero. It typically happens when kobject_put() is called. But it might be delayed when the related sysfs file is opened for reading or writing. To find such bugs, the release() method is delayed using a delayed work when CONFIG_DEBUG_KOBJECT_RELEASE is defined. Livepatch is on the safe side but only because the patch/module could not be removed at the moment. A patchset improving the consistency model is flying around and it would allow to remove unused patches eventually. I have simulated the situation when the modules can be removed and enabled the following config options: CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_OBJECTS_WORK=y CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_KOBJECT_RELEASE=y Then I got the following crash: dhcp75 login: BUG: unable to handle kernel paging request at ffffffffa0002048 IP: [<ffffffff812aa868>] sysfs_file_ops+0x28/0x60 PGD 1e07067 PUD 1e08063 PMD 139c9a067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: [last unloaded: livepatch_sample] CPU: 1 PID: 5667 Comm: bash Tainted: G W E K 4.6.0-rc7-next-20160510-4-default+ torvalds#231 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800ba24c740 ti: ffff880138d04000 task.ti: ffff880138d04000 RIP: 0010:[<ffffffff812aa868>] [<ffffffff812aa868>] sysfs_file_ops+0x28/0x60 RSP: 0018:ffff880138d07dd8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffffffa0002020 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff880035a51430 RDI: 0000000000000246 RBP: ffff880138d07de0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8800ba24c740 R11: 0000000000000001 R12: 0000000000000002 R13: ffff880139e617c0 R14: ffff880035813a18 R15: ffff880138d07f20 FS: 00007f13a3927700(0000) GS:ffff88013fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0002048 CR3: 0000000139961000 CR4: 00000000000006e0 Stack: ffff880035813a00 ffff880138d07e08 ffffffff812aa8bf ffff880035813a00 ffff880139e617c0 0000000000000002 ffff880138d07e48 ffffffff812a9e84 0000000000000001 ffff8800b8a13540 ffff880138d07f20 00007f13a392c000 Call Trace: [<ffffffff812aa8bf>] sysfs_kf_write+0x1f/0x60 [<ffffffff812a9e84>] kernfs_fop_write+0x144/0x1e0 [<ffffffff81222828>] __vfs_write+0x28/0x120 [<ffffffff810c61b9>] ? percpu_down_read+0x49/0x80 [<ffffffff812261c1>] ? __sb_start_write+0xd1/0xf0 [<ffffffff812261c1>] ? __sb_start_write+0xd1/0xf0 [<ffffffff81222f22>] vfs_write+0xb2/0x1b0 [<ffffffff81244176>] ? __fget_light+0x66/0x90 [<ffffffff81224279>] SyS_write+0x49/0xa0 [<ffffffff819582fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd Code: 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 f6 87 89 00 00 00 01 48 8b 47 28 48 8b 98 80 00 00 00 74 0a 8b 05 7c 6d c7 00 85 c0 75 10 <48> 8b 43 28 48 85 c0 74 27 48 8b 40 08 5b 5d c3 48 83 c7 08 e8 RIP [<ffffffff812aa868>] sysfs_file_ops+0x28/0x60 RSP <ffff880138d07dd8> CR2: ffffffffa0002048 The problem was that struct klp_patch was defined statically in the livepatch module. And the module was removed before the kobject release() method was called. For a short time, we were able to open /sys/kernel/livepatch/livepatch_sample/enabled for writing while the related kobject was already gone. There are two basic approaches how to get out of this trap. Either we need to allocate all the structures dynamically so that they survive the module removal. Or we need to block the module removal until the sysfs entries are released[*]. This patch is an attempt of the first approach. All three structures, klp_patch, klp_object, and klp_func, are dynamically allocated because they all contains kobject and related sysfs entries. The question was how to define the user-provided data an easy way. One approach was to keep the static definition using reduced structures that would later be copied to dynamically allocated structures. It is definitely worth consideration[**]. This patch tries another approach. It adds one more level of functions that are called before the patch is registered. Then patch registration is a clear boundary that marks the patch as complete and ready for enabling. New objects or functions could not be added to the patch from this point on. The three new functions are klp_create_empty_patch(), klp_add_object(), and klp_add_func(). They initialize most of the struct members and contains the related code from the former klp_init_*() functions. The information about loaded objects is still detected during the patch registration and from the module callbacks. Also the sysfs entries are still created during the patch registration. Note that we should not create sysfs entries before the patch is complete to make the handling easier. Anyway, these parts of klp_init_*() functions are moved to klp_registration_*() functions to make it clear in which phase they happen. The patch avoids hardcoding the size of the arrays by using linked lists. Then the standard list_for_each_entry() macro could be used to iterate the list of objects and functions. Also there are helper macros that help with error handling and make the patch definition easier to do and review. The last thing is a patch removal. It can be done only when the patch is disabled. And it is done in one step. To make it symmetric, we need to remove the sysfs entries right after the patch is removed from the global list. The sysfs entries are handled via the kobjects. Therefore the kobjects should be removed at the same time together with the related structures. All the klp_free*() function are renamed to klp_release_*() functions to reduce a potential confusion. Note that the structures are freed by the klp_kobj_release_*() functions that might be called later. [*] We might block removing the module using a completion() that would wait until the top-level kobject release method is called. This approach is used by the module framework itself, see mod_kobject_put() and module_kobj_release(). It even seems to be safe. kobject_cleanup() do not longer access any data from the kobject once the release method is called. And it is a way how to make sure that the structure has valid data until the release method is called. [**] I deemed ugly to define the patch using reduced structures and just copy them from static defined arrays to a dynamically defined arrays. But it would keep the definition reasonable without hardcoded array size and other tricks. Also it would help to pass all data in call and avoid the three levels of functions. It will be possible to do this during the patch registration and avoid the three levels of functions: create+add/register/enable. Also it will avoid the asymmetry between the patch creation and release. Huh, I send this patch because it is working and to show how this approach looks like. I would personally would prefer using the completion. I think that it is not a hack after all. Signed-off-by: Petr Mladek <[email protected]>

…ch-fixes WARNING: line over 80 characters torvalds#214: FILE: mm/page_alloc.c:4332: +static bool show_mem_node_skip(unsigned int flags, int nid, nodemask_t *nodemask) WARNING: line over 80 characters torvalds#230: FILE: mm/page_alloc.c:4338: + * no node mask - aka implicit memory numa policy. Do not bother with the WARNING: line over 80 characters torvalds#231: FILE: mm/page_alloc.c:4339: + * synchronization - read_mems_allowed_begin - because we do not have to be total: 0 errors, 3 warnings, 198 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/lib-show_memc-teach-show_mem-to-work-with-the-given-nodemask.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

A couple of small fixes and scheduling simplification

…ch-fixes WARNING: line over 80 characters torvalds#214: FILE: mm/page_alloc.c:4332: +static bool show_mem_node_skip(unsigned int flags, int nid, nodemask_t *nodemask) WARNING: line over 80 characters torvalds#230: FILE: mm/page_alloc.c:4338: + * no node mask - aka implicit memory numa policy. Do not bother with the WARNING: line over 80 characters torvalds#231: FILE: mm/page_alloc.c:4339: + * synchronization - read_mems_allowed_begin - because we do not have to be total: 0 errors, 3 warnings, 198 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/lib-show_memc-teach-show_mem-to-work-with-the-given-nodemask.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

In 4.17-rc, commit 03ea6d6 ("usb: dwc2: Enable power down") caused the HiKey board to not correctly handle switching between usb-gadget and usb-host mode. Unplugging the OTG port would result in: [ 42.240973] dwc2 f72c0000.usb: dwc2_restore_host_registers: no host registers to restore [ 42.249066] dwc2 f72c0000.usb: dwc2_host_exit_hibernation: failed to restore host registers And the USB-host ports would not function. And plugging in the OTG port, we would see: [ 46.046557] WARNING: CPU: 3 PID: 6 at drivers/usb/dwc2/gadget.c:260 dwc2_hsotg_init_fifo+0x194/0x1a0 [ 46.055761] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 4.17.0-rc5-00030-ge67da8c torvalds#231 [ 46.055767] Hardware name: HiKey Development Board (DT) [ 46.055784] Workqueue: dwc2 dwc2_conn_id_status_change ... Thus, this patch sets the hisi params to disable the power_down flag by default, and gets thing working again. Cc: John Youn <[email protected]> Cc: Vardan Mikayelyan <[email protected]> Cc: Artur Petrosyan <[email protected]> Cc: Grigor Tovmasyan <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>

Fix checkpatch warnings: WARNING: Use #include <linux/io.h> instead of <asm/io.h> torvalds#38: FILE: drivers/tty/serial/sunzilog.c:38: +#include <asm/io.h> WARNING: line over 80 characters torvalds#109: FILE: drivers/tty/serial/sunzilog.c:109: +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) WARNING: line over 80 characters torvalds#116: FILE: drivers/tty/serial/sunzilog.c:116: +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) WARNING: line over 80 characters torvalds#179: FILE: drivers/tty/serial/sunzilog.c:179: +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) WARNING: Missing a blank line after declarations torvalds#188: FILE: drivers/tty/serial/sunzilog.c:188: + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) ERROR: trailing whitespace torvalds#231: FILE: drivers/tty/serial/sunzilog.c:231: +^I$ WARNING: braces {} are not necessary for any arm of this statement torvalds#276: FILE: drivers/tty/serial/sunzilog.c:276: + if (ZS_TX_ACTIVE(up)) { [...] + } else { [...] ERROR: else should follow close brace '}' torvalds#378: FILE: drivers/tty/serial/sunzilog.c:378: + } + else if (r1 & PAR_ERR) ERROR: code indent should use tabs where possible torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: please, no space before tabs torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: line over 80 characters torvalds#440: FILE: drivers/tty/serial/sunzilog.c:440: + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. WARNING: line over 80 characters torvalds#441: FILE: drivers/tty/serial/sunzilog.c:441: + * But it does not tell us which bit has changed, we have to keep WARNING: Missing a blank line after declarations torvalds#464: FILE: drivers/tty/serial/sunzilog.c:464: + unsigned char status = readb(&channel->control); + ZSDELAY(); WARNING: line over 80 characters torvalds#468: FILE: drivers/tty/serial/sunzilog.c:468: + * It can occur because of how we do serial console writes. It would WARNING: line over 80 characters torvalds#469: FILE: drivers/tty/serial/sunzilog.c:469: + * be nice to transmit console writes just like we normally would for WARNING: line over 80 characters torvalds#470: FILE: drivers/tty/serial/sunzilog.c:470: + * a TTY line. (ie. buffered and TX interrupt driven). That is not WARNING: line over 80 characters torvalds#471: FILE: drivers/tty/serial/sunzilog.c:471: + * easy because console writes cannot sleep. One solution might be WARNING: line over 80 characters torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) WARNING: plain inline is preferred over __inline__ torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) ERROR: trailing whitespace torvalds#664: FILE: drivers/tty/serial/sunzilog.c:664: +^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#752: FILE: drivers/tty/serial/sunzilog.c:752: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#779: FILE: drivers/tty/serial/sunzilog.c:779: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ WARNING: line over 80 characters torvalds#999: FILE: drivers/tty/serial/sunzilog.c:999: +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) WARNING: Missing a blank line after declarations #1142: FILE: drivers/tty/serial/sunzilog.c:1142: + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... #1230: FILE: drivers/tty/serial/sunzilog.c:1230: + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", WARNING: braces {} are not necessary for single statement blocks #1383: FILE: drivers/tty/serial/sunzilog.c:1383: + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } WARNING: quoted string split across lines #1493: FILE: drivers/tty/serial/sunzilog.c:1493: + dev_info(&op->dev, "Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: quoted string split across lines #1497: FILE: drivers/tty/serial/sunzilog.c:1497: + dev_info(&op->dev, "Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: Missing a blank line after declarations #1581: FILE: drivers/tty/serial/sunzilog.c:1581: + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, WARNING: line over 80 characters #1590: FILE: drivers/tty/serial/sunzilog.c:1590: + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ WARNING: line over 80 characters #1627: FILE: drivers/tty/serial/sunzilog.c:1627: + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ ERROR: trailing statements should be on next line #1248: FILE: drivers/tty/serial/sunzilog.c:1248: + case B150: baud = 150; break; ERROR: trailing statements should be on next line #1249: FILE: drivers/tty/serial/sunzilog.c:1249: + case B300: baud = 300; break; ERROR: trailing statements should be on next line #1250: FILE: drivers/tty/serial/sunzilog.c:1250: + case B600: baud = 600; break; ERROR: trailing statements should be on next line #1251: FILE: drivers/tty/serial/sunzilog.c:1251: + case B1200: baud = 1200; break; ERROR: trailing statements should be on next line #1252: FILE: drivers/tty/serial/sunzilog.c:1252: + case B2400: baud = 2400; break; ERROR: trailing statements should be on next line #1253: FILE: drivers/tty/serial/sunzilog.c:1253: + case B4800: baud = 4800; break; ERROR: trailing statements should be on next line #1254: FILE: drivers/tty/serial/sunzilog.c:1254: + default: case B9600: baud = 9600; break; ERROR: trailing statements should be on next line #1255: FILE: drivers/tty/serial/sunzilog.c:1255: + case B19200: baud = 19200; break; ERROR: trailing statements should be on next line #1256: FILE: drivers/tty/serial/sunzilog.c:1256: + case B38400: baud = 38400; break; Signed-off-by: Enrico Weigelt <[email protected]>

WARNING: else is not generally useful after a break or return torvalds#173: FILE: mm/kmemleak.c:426: + return object; + else WARNING: line over 80 characters torvalds#231: FILE: mm/kmemleak.c:793: + area = kmem_cache_alloc(scan_area_cache, gfp_kmemleak_mask(gfp)); total: 0 errors, 2 warnings, 468 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-kmemleak-use-the-memory-pool-for-early-allocations.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Catalin Marinas <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

WARNING: else is not generally useful after a break or return torvalds#173: FILE: mm/kmemleak.c:426: + return object; + else WARNING: line over 80 characters torvalds#231: FILE: mm/kmemleak.c:793: + area = kmem_cache_alloc(scan_area_cache, gfp_kmemleak_mask(gfp)); total: 0 errors, 2 warnings, 468 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-kmemleak-use-the-memory-pool-for-early-allocations.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Catalin Marinas <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Add a big batch of test coverage to assert all aspects of the tcx link API: # ./vmtest.sh -- ./test_progs -t tc_links [...] torvalds#225 tc_links_after:OK torvalds#226 tc_links_append:OK torvalds#227 tc_links_basic:OK torvalds#228 tc_links_before:OK torvalds#229 tc_links_chain_classic:OK torvalds#230 tc_links_dev_cleanup:OK torvalds#231 tc_links_invalid:OK torvalds#232 tc_links_prepend:OK torvalds#233 tc_links_replace:OK torvalds#234 tc_links_revision:OK Summary: 10/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]>

Add a big batch of test coverage to assert all aspects of the tcx link API: # ./vmtest.sh -- ./test_progs -t tc_links [...] torvalds#225 tc_links_after:OK torvalds#226 tc_links_append:OK torvalds#227 tc_links_basic:OK torvalds#228 tc_links_before:OK torvalds#229 tc_links_chain_classic:OK torvalds#230 tc_links_dev_cleanup:OK torvalds#231 tc_links_invalid:OK torvalds#232 tc_links_prepend:OK torvalds#233 tc_links_replace:OK torvalds#234 tc_links_revision:OK Summary: 10/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

Changes: * Radxa CM3 + RPI CM4 IO: Set HDMI preferred resolution Signed-off-by: Stephen Chen <[email protected]>

dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ torvalds#231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <[email protected]> Co-developed-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>

dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <[email protected]> Co-developed-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit ab75a0d) Cc: [email protected]

commit 5225fd2 upstream. dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ torvalds#231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <[email protected]> Co-developed-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit ab75a0d) Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ torvalds#231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <[email protected]> Co-developed-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Fabio Scaccabarozzi <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit ab75a0d) Cc: [email protected]

Merge pull request #1 from torvalds/master

327ef99

sync with linus

jgunthorpe closed this Dec 1, 2015

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#231 from tavip/small-fixes

6bce11d

A couple of small fixes and scheduling simplification

RadxaStephen added a commit to RadxaStephen/linux that referenced this pull request Mar 6, 2024

Merge pull request torvalds#231 from vamrs-feng/hdmi_resolution

eeb393d

Changes: * Radxa CM3 + RPI CM4 IO: Set HDMI preferred resolution Signed-off-by: Stephen Chen <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge pull request #2 from torvalds/master #231

Merge pull request #2 from torvalds/master #231

jgunthorpe commented Dec 1, 2015

jgunthorpe commented Dec 1, 2015

Merge pull request #2 from torvalds/master #231

Merge pull request #2 from torvalds/master #231

Conversation

jgunthorpe commented Dec 1, 2015

jgunthorpe commented Dec 1, 2015