AMD integrated gpu crashing for 6.2 #6
Comments
Matombo
pushed a commit
that referenced
this issue
Sep 19, 2023
BugLink: https://bugs.launchpad.net/bugs/2032689 [ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 27, 2023
BugLink: https://bugs.launchpad.net/bugs/2029808 [ Upstream commit de9df6c ] Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
|
Hi, just as an update for this issue, it is still not resolved but not nearly as bad as before after opening laptop (pulse gen 2) and removing / cleaning ram / ssd connections. Originally it was crashing computer multiple times a day and now I got it down to roughly once or at most twice a day. Would probably still keep this open since there seems to be an error with the AMD drivers per the issue linked (it is very much actively being worked on with kernel devs) but it is not as severe as initially noted now. |
tuxedo-bot
pushed a commit
that referenced
this issue
Oct 4, 2023
BugLink: https://bugs.launchpad.net/bugs/2034469 [ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Oct 4, 2023
BugLink: https://bugs.launchpad.net/bugs/2034469 [ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
|
Another update, system is now basically unusable when it is under heavy load. For some reason using Please, any suggestions here? |
|
Hi, |
|
@Matombo - Thank you so much for getting back to me. Really appreciated since this has been a multiple times a day issue... So I actually did that already and indeed it seemed like it helped initially but then the bug came back. I did that because I saw some other errors come up relating to losing write permissions to my hd and so I thought it was just related to the contacts of the drive, not the GPU itself. Was quite annoying though as I'd lose about 10 min of work since my IDE was not saving changes. I'll give that a try though and report back on this thread. Thanks again for the help. |
|
@Matombo - Really jiggled everything around a firmly set ram / nvme in their places. Still have the issue. |
|
FYI - I think the new 6.5 kernel fixed this. System stable today - no crashes since. Will close this issue if I survive another couple days without a crash. |
|
Yeah I am basically sure the 6.5 kernel fixed this issue now. Closing. |
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041702 [ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041702 [ Upstream commit ef23cb5 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. The same problem was found in 'perf top' after an audit of all perf_session__new() failure handling. Fixes: 6ef81c5 ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jeremie Galarneau <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mukesh Ojha <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Shawn Landden <[email protected]> Cc: Song Liu <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041702 [ Upstream commit 0bc36c0 ] user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 712f4aa ("unix: properly account for FDs passed over unix sockets") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Willy Tarreau <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041702 [ Upstream commit afe8764 ] sk->sk_shutdown is changed under unix_state_lock(sk), but unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly. sock_alloc_send_pskb `- sock_wait_for_wmem Let's use READ_ONCE() there. Note that the writer side was marked by commit e1d09c2 ("af_unix: Fix data races around sk->sk_shutdown."). BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1053 __sock_release+0x7d/0x170 net/socket.c:654 sock_close+0x19/0x30 net/socket.c:1386 __fput+0x2a3/0x680 fs/file_table.c:384 ____fput+0x15/0x20 fs/file_table.c:412 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0: sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767 unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2045809 [ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041999 [ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041999 [ Upstream commit ef23cb5 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. The same problem was found in 'perf top' after an audit of all perf_session__new() failure handling. Fixes: 6ef81c5 ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jeremie Galarneau <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mukesh Ojha <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Shawn Landden <[email protected]> Cc: Song Liu <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041999 [ Upstream commit abaf1e0 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. Fixes: eef4fee ("perf lock: Dynamically allocate lockhash_table") Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mamatha Inamdar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Ross Zwisler <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Tiezhu Yang <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041999 [ Upstream commit 0bc36c0 ] user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 712f4aa ("unix: properly account for FDs passed over unix sockets") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Willy Tarreau <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2041999 [ Upstream commit afe8764 ] sk->sk_shutdown is changed under unix_state_lock(sk), but unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly. sock_alloc_send_pskb `- sock_wait_for_wmem Let's use READ_ONCE() there. Note that the writer side was marked by commit e1d09c2 ("af_unix: Fix data races around sk->sk_shutdown."). BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1053 __sock_release+0x7d/0x170 net/socket.c:654 sock_close+0x19/0x30 net/socket.c:1386 __fput+0x2a3/0x680 fs/file_table.c:384 ____fput+0x15/0x20 fs/file_table.c:412 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0: sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767 unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2045806 [ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2046269 commit 152d0bc upstream. A skcipher_request object is made up of struct skcipher_request followed by a variable-sized trailer. The allocation of the skcipher_request and IV in crypt_iv_eboiv_gen is missing the memory for struct skcipher_request. Fix it by adding it to reqsize. Fixes: e302309 ("dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE") Cc: <[email protected]> #6.5+ Reported-by: Tatu Heikkilä <[email protected]> Reviewed-by: Mike Snitzer <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Feb 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2050038 [ Upstream commit 97cf796 ] KASAN reported a UAF bug when I was running xfs/235: BUG: KASAN: use-after-free in xlog_recover_process_intents+0xa77/0xae0 [xfs] Read of size 8 at addr ffff88804391b360 by task mount/5680 CPU: 2 PID: 5680 Comm: mount Not tainted 6.0.0-xfsx #6.0.0 77e7b52a4943a975441e5ac90a5ad7748b7867f6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x2cc/0x682 kasan_report+0xa3/0x120 xlog_recover_process_intents+0xa77/0xae0 [xfs fb841c7180aad3f8359438576e27867f5795667e] xlog_recover_finish+0x7d/0x970 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_log_mount_finish+0x2d7/0x5d0 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_mountfs+0x11d4/0x1d10 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_fs_fill_super+0x13d5/0x1a80 [xfs fb841c7180aad3f8359438576e27867f5795667e] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff5bc069eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 1f 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe433fd448 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5bc069eae RDX: 00005575d7213290 RSI: 00005575d72132d0 RDI: 00005575d72132b0 RBP: 00005575d7212fd0 R08: 00005575d7213230 R09: 00005575d7213fe0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00005575d7213290 R14: 00005575d72132b0 R15: 00005575d7212fd0 </TASK> Allocated by task 5680: kasan_save_stack+0x1e/0x40 __kasan_slab_alloc+0x66/0x80 kmem_cache_alloc+0x152/0x320 xfs_rui_init+0x17a/0x1b0 [xfs] xlog_recover_rui_commit_pass2+0xb9/0x2e0 [xfs] xlog_recover_items_pass2+0xe9/0x220 [xfs] xlog_recover_commit_trans+0x673/0x900 [xfs] xlog_recovery_process_trans+0xbe/0x130 [xfs] xlog_recover_process_data+0x103/0x2a0 [xfs] xlog_do_recovery_pass+0x548/0xc60 [xfs] xlog_do_log_recovery+0x62/0xc0 [xfs] xlog_do_recover+0x73/0x480 [xfs] xlog_recover+0x229/0x460 [xfs] xfs_log_mount+0x284/0x640 [xfs] xfs_mountfs+0xf8b/0x1d10 [xfs] xfs_fs_fill_super+0x13d5/0x1a80 [xfs] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 5680: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x144/0x1b0 slab_free_freelist_hook+0xab/0x180 kmem_cache_free+0x1f1/0x410 xfs_rud_item_release+0x33/0x80 [xfs] xfs_trans_free_items+0xc3/0x220 [xfs] xfs_trans_cancel+0x1fa/0x590 [xfs] xfs_rui_item_recover+0x913/0xd60 [xfs] xlog_recover_process_intents+0x24e/0xae0 [xfs] xlog_recover_finish+0x7d/0x970 [xfs] xfs_log_mount_finish+0x2d7/0x5d0 [xfs] xfs_mountfs+0x11d4/0x1d10 [xfs] xfs_fs_fill_super+0x13d5/0x1a80 [xfs] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88804391b300 which belongs to the cache xfs_rui_item of size 688 The buggy address is located 96 bytes inside of 688-byte region [ffff88804391b300, ffff88804391b5b0) The buggy address belongs to the physical page: page:ffffea00010e4600 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888043919320 pfn:0x43918 head:ffffea00010e4600 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff) raw: 04fff80000010200 0000000000000000 dead000000000122 ffff88807f0eadc0 raw: ffff888043919320 0000000080140010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804391b200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88804391b280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88804391b300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88804391b380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88804391b400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The test fuzzes an rmap btree block and starts writer threads to induce a filesystem shutdown on the corrupt block. When the filesystem is remounted, recovery will try to replay the committed rmap intent item, but the corruption problem causes the recovery transaction to fail. Cancelling the transaction frees the RUD, which frees the RUI that we recovered. When we return to xlog_recover_process_intents, @lip is now a dangling pointer, and we cannot use it to find the iop_recover method for the tracepoint. Hence we must store the item ops before calling ->iop_recover if we want to give it to the tracepoint so that the trace data will tell us exactly which intent item failed. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Leah Rumancik <[email protected]> Acked-by: Chandan Babu R <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Feb 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2050858 [ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Mar 22, 2024
…te_call_indirect BugLink: https://bugs.launchpad.net/bugs/2054779 commit f5d03da upstream. kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following: [ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The relevant assembly code is (from objdump, faulting address highlighted): ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax The emulation incorrectly sets the return address to be ffffffff8102ed9d + 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above. Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 6256e66 ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: [email protected] Signed-off-by: Jinghao Jia <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Mar 22, 2024
…te_call_indirect BugLink: https://bugs.launchpad.net/bugs/2054411 commit f5d03da upstream. kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following: [ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The relevant assembly code is (from objdump, faulting address highlighted): ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax The emulation incorrectly sets the return address to be ffffffff8102ed9d + 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above. Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 6256e66 ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: [email protected] Signed-off-by: Jinghao Jia <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Apr 10, 2024
BugLink: https://bugs.launchpad.net/bugs/2059014 [ Upstream commit fc3a553 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Apr 17, 2024
BugLink: https://bugs.launchpad.net/bugs/2059014 [ Upstream commit fc3a553 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 7, 2024
BugLink: https://bugs.launchpad.net/bugs/2073788 commit d7f0164 upstream. RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations. Cc: <[email protected]> #6.7+ Signed-off-by: Jia Jie Ho <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 7, 2024
…PLES event" BugLink: https://bugs.launchpad.net/bugs/2073788 commit 5b3cde1 upstream. This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 12, 2024
BugLink: https://bugs.launchpad.net/bugs/2072617 commit d3b17c6 upstream. Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely. Fixes: 7d42e09 ("crypto: qat - resolve race condition during AER recovery") Cc: <[email protected]> #6.8+ Signed-off-by: Herbert Xu <[email protected]> Reviewed-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 12, 2024
BugLink: https://bugs.launchpad.net/bugs/2073765 commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2073603 [ Upstream commit 88ce010 ] The session has a header in it which contains a perf env with bpf_progs. The bpf_progs are accessed by the sideband thread and so the sideband thread must be stopped before the session is deleted, to avoid a use after free. This error was detected by AddressSanitizer in the following: ==2054673==ERROR: AddressSanitizer: heap-use-after-free on address 0x61d000161e00 at pc 0x55769289de54 bp 0x7f9df36d4ab0 sp 0x7f9df36d4aa8 READ of size 8 at 0x61d000161e00 thread T1 #0 0x55769289de53 in __perf_env__insert_bpf_prog_info util/env.c:42 #1 0x55769289dbb1 in perf_env__insert_bpf_prog_info util/env.c:29 #2 0x557692bbae29 in perf_env__add_bpf_info util/bpf-event.c:483 #3 0x557692bbb01a in bpf_event__sb_cb util/bpf-event.c:512 #4 0x5576928b75f4 in perf_evlist__poll_thread util/sideband_evlist.c:68 #5 0x7f9df96a63eb in start_thread nptl/pthread_create.c:444 #6 0x7f9df9726a4b in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 0x61d000161e00 is located 384 bytes inside of 2136-byte region [0x61d000161c80,0x61d0001624d8) freed by thread T0 here: #0 0x7f9dfa6d7288 in __interceptor_free libsanitizer/asan/asan_malloc_linux.cpp:52 #1 0x557692978d50 in perf_session__delete util/session.c:319 #2 0x557692673959 in __cmd_record tools/perf/builtin-record.c:2884 #3 0x55769267a9f0 in cmd_record tools/perf/builtin-record.c:4259 #4 0x55769286710c in run_builtin tools/perf/perf.c:349 #5 0x557692867678 in handle_internal_command tools/perf/perf.c:402 #6 0x557692867a40 in run_argv tools/perf/perf.c:446 #7 0x557692867fae in main tools/perf/perf.c:562 #8 0x7f9df96456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Fixes: 657ee55 ("perf evlist: Introduce side band thread") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2073603 [ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2073788 commit d3b17c6 upstream. Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely. Fixes: 7d42e09 ("crypto: qat - resolve race condition during AER recovery") Cc: <[email protected]> #6.8+ Signed-off-by: Herbert Xu <[email protected]> Reviewed-by: Giovanni Cabiddu <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2073788 commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2073788 commit d7f0164 upstream. RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations. Cc: <[email protected]> #6.7+ Signed-off-by: Jia Jie Ho <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 13, 2024
…PLES event" BugLink: https://bugs.launchpad.net/bugs/2073788 commit 5b3cde1 upstream. This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Aug 29, 2024
attempts to retrofit memory safety onto C are increasingly annoying ------------[ cut here ]------------ memcpy: detected field-spanning write (size 4) of single field "&k.replicas" at fs/bcachefs/replicas.c:454 (size 3) WARNING: CPU: 5 PID: 6525 at fs/bcachefs/replicas.c:454 bch2_replicas_gc2+0x2cb/0x400 [bcachefs] bch2_replicas_gc2+0x2cb/0x400: bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3) Modules linked in: dm_mod tun nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay msr sctp bcachefs lz4hc_compress lz4_compress libcrc32c xor raid6_pq lz4_decompress pps_ldisc pps_core wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel curve25519_x86_64 libcurve25519_generic libchacha sit tunnel4 ip_tunnel af_packet bridge stp llc ip6table_nat ip6table_filter ip6_tables xt_MASQUERADE xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables tcp_bbr sch_fq_codel efivarfs nls_iso8859_1 nls_cp437 vfat fat cdc_mbim cdc_wdm cdc_ncm cdc_ether usbnet r8152 input_leds joydev mii amdgpu mousedev hid_generic usbhid hid ath10k_pci amd_atl edac_mce_amd ath10k_core kvm_amd ath kvm mac80211 bfq crc32_pclmul crc32c_intel polyval_clmulni polyval_generic sha512_ssse3 sha256_ssse3 sha1_ssse3 snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg i2c_algo_bit drm_exec snd_hda_codec r8169 drm_suballoc_helper aesni_intel gf128mul crypto_simd amdxcp realtek mfd_core tpm_crb drm_buddy snd_hwdep mdio_devres libarc4 cryptd tpm_tis wmi_bmof cfg80211 evdev libphy snd_hda_core tpm_tis_core gpu_sched rapl xhci_pci xhci_hcd snd_pcm drm_display_helper snd_timer tpm sp5100_tco rfkill efi_pstore mpt3sas drm_ttm_helper ahci usbcore libaescfb ccp snd ttm 8250 libahci watchdog soundcore raid_class sha1_generic acpi_cpufreq k10temp 8250_base usb_common scsi_transport_sas i2c_piix4 hwmon video serial_mctrl_gpio serial_base ecdh_generic wmi rtc_cmos backlight ecc gpio_amdpt rng_core gpio_generic button CPU: 5 UID: 0 PID: 6525 Comm: bcachefs Tainted: G W 6.11.0-rc1-ojab-00058-g224bc118aec9 #6 6d5debde398d2a84851f42ab300dae32c2992027 Tainted: [W]=WARN RIP: 0010:bch2_replicas_gc2+0x2cb/0x400 [bcachefs] Code: c7 c2 60 91 d1 c1 48 89 c6 48 c7 c7 98 91 d1 c1 4c 89 14 24 44 89 5c 24 08 48 89 44 24 20 c6 05 fa 68 04 00 01 e8 05 a3 40 e4 <0f> 0b 4c 8b 14 24 44 8b 5c 24 08 48 8b 44 24 20 e9 55 fe ff ff 8b RSP: 0018:ffffb434c9263d60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9a8efa79cc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb434c9263de0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000005 R13: ffff9a8efa73c300 R14: ffff9a8d9e880000 R15: ffff9a8d9e8806f8 FS: 0000000000000000(0000) GS:ffff9a9410c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565423373090 CR3: 0000000164e30000 CR4: 00000000003506f0 Call Trace: <TASK> ? __warn+0x97/0x150 ? bch2_replicas_gc2+0x2cb/0x400 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3] bch2_replicas_gc2+0x2cb/0x400: bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3) ? report_bug+0x196/0x1c0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x80 ? __wake_up_klogd.part.0+0x4c/0x80 ? asm_exc_invalid_op+0x16/0x20 ? bch2_replicas_gc2+0x2cb/0x400 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3] bch2_replicas_gc2+0x2cb/0x400: bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3) ? bch2_dev_usage_read+0xa0/0xa0 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3] bch2_dev_usage_read+0xa0/0xa0: discard_in_flight_remove at /home/ojab/src/bcachefs/fs/bcachefs/alloc_background.c:1712 Signed-off-by: Kent Overstreet <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 13, 2024
…play BugLink: https://bugs.launchpad.net/bugs/2076435 [ Upstream commit d182575 ] During inode logging (and log replay too), we are holding a transaction handle and we often need to call btrfs_iget(), which will read an inode from its subvolume btree if it's not loaded in memory and that results in allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode() callback - and this may recurse into the filesystem in case we are under memory pressure and attempt to commit the current transaction, resulting in a deadlock since the logging (or log replay) task is holding a transaction handle open. Syzbot reported this with the following stack traces: WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted ------------------------------------------------------ syz-executor.1/9919 is trying to acquire lock: ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 but task is already holding lock: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ei->log_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x12f/0x260 fs/read_write.c:643 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170 close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324 generic_shutdown_super+0x159/0x3d0 fs/super.c:642 kill_anon_super+0x3a/0x60 fs/super.c:1226 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super+0xde/0x100 fs/super.c:506 cleanup_mnt+0x222/0x450 fs/namespace.c:1267 task_work_run+0x14e/0x250 kernel/task_work.c:180 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218 __do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: __lock_release kernel/locking/lockdep.c:5468 [inline] lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774 percpu_up_read include/linux/percpu-rwsem.h:99 [inline] __sb_end_write include/linux/fs.h:1650 [inline] sb_end_intwrite include/linux/fs.h:1767 [inline] __btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071 btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 dput.part.0+0x4b1/0x9b0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132 ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182 destroy_inode+0xc4/0x1b0 fs/inode.c:311 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 shrink_kill fs/dcache.c:1048 [inline] shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075 prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156 super_cache_scan+0x32a/0x550 fs/super.c:221 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab_memcg mm/shrinker.c:548 [inline] shrink_slab+0xa87/0x1310 mm/shrinker.c:626 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (fs_reclaim){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e other info that might help us debug this: Chain exists of: fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->log_mutex); lock(btrfs_trans_num_extwriters); lock(&ei->log_mutex); lock(fs_reclaim); *** DEADLOCK *** 7 locks held by syz-executor.1/9919: #0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072 #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline] #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385 #2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388 #3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952 #4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 stack backtrace: CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7334579 Code: b8 01 10 06 03 (...) RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix this by ensuring we are under a NOFS scope whenever we call btrfs_iget() during inode logging and log replay. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2076435 commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 27, 2024
…play BugLink: https://bugs.launchpad.net/bugs/2076435 [ Upstream commit d182575 ] During inode logging (and log replay too), we are holding a transaction handle and we often need to call btrfs_iget(), which will read an inode from its subvolume btree if it's not loaded in memory and that results in allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode() callback - and this may recurse into the filesystem in case we are under memory pressure and attempt to commit the current transaction, resulting in a deadlock since the logging (or log replay) task is holding a transaction handle open. Syzbot reported this with the following stack traces: WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted ------------------------------------------------------ syz-executor.1/9919 is trying to acquire lock: ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 but task is already holding lock: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ei->log_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x12f/0x260 fs/read_write.c:643 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170 close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324 generic_shutdown_super+0x159/0x3d0 fs/super.c:642 kill_anon_super+0x3a/0x60 fs/super.c:1226 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super+0xde/0x100 fs/super.c:506 cleanup_mnt+0x222/0x450 fs/namespace.c:1267 task_work_run+0x14e/0x250 kernel/task_work.c:180 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218 __do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: __lock_release kernel/locking/lockdep.c:5468 [inline] lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774 percpu_up_read include/linux/percpu-rwsem.h:99 [inline] __sb_end_write include/linux/fs.h:1650 [inline] sb_end_intwrite include/linux/fs.h:1767 [inline] __btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071 btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 dput.part.0+0x4b1/0x9b0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132 ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182 destroy_inode+0xc4/0x1b0 fs/inode.c:311 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 shrink_kill fs/dcache.c:1048 [inline] shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075 prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156 super_cache_scan+0x32a/0x550 fs/super.c:221 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab_memcg mm/shrinker.c:548 [inline] shrink_slab+0xa87/0x1310 mm/shrinker.c:626 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (fs_reclaim){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e other info that might help us debug this: Chain exists of: fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->log_mutex); lock(btrfs_trans_num_extwriters); lock(&ei->log_mutex); lock(fs_reclaim); *** DEADLOCK *** 7 locks held by syz-executor.1/9919: #0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072 #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline] #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385 #2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388 #3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952 #4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 stack backtrace: CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7334579 Code: b8 01 10 06 03 (...) RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix this by ensuring we are under a NOFS scope whenever we call btrfs_iget() during inode logging and log replay. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Sep 27, 2024
BugLink: https://bugs.launchpad.net/bugs/2076435 commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Oct 8, 2024
BugLink: https://bugs.launchpad.net/bugs/2078428 commit f0d17d6 upstream. The pen ID, 0x80842, was not the correct ID for wacom driver to treat. The ID was corrected to 0x8842. Also, 0x4200 was not the expected ID used on any Wacom device. Therefore, 0x4200 was removed. Signed-off-by: Tatsunosuke Tobita <[email protected]> Signed-off-by: Tatsunosuke Tobita <[email protected]> Fixes: bfdc750 ("HID: wacom: add three styli to wacom_intuos_get_tool_type") Cc: [email protected] #6.2 Reviewed-by: Ping Cheng <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Oct 8, 2024
BugLink: https://bugs.launchpad.net/bugs/2078428 [ Upstream commit 86a41ea ] When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 [ Upstream commit 18ad4df091dd5d067d2faa8fce1180b79f7041a7 ] 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436 bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812 blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403 __blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517 blk_mq_get_new_requests block/blk-mq.c:2940 [inline] blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042 __submit_bio+0x331/0x6f0 block/blk-core.c:624 __submit_bio_noacct_mq block/blk-core.c:703 [inline] submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732 submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826 xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958 xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619 xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Freed by task 946: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0x118/0x6f0 mm/slub.c:3808 rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189 rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462 __do_softirq+0x1b0/0x7a2 kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 The buggy address belongs to the object at ffff888123839d68 which belongs to the cache bfq_io_cq of size 1360 The buggy address is located 336 bytes inside of freed 1360-byte region [ffff888123839d68, ffff88812383a2b8) The buggy address belongs to the physical page: page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838 head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488 raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 36eca89 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Nov 15, 2024
BugLink: https://bugs.launchpad.net/bugs/2086242 [ Upstream commit a848c29e3486189aaabd5663bc11aea50c5bd144 ] On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089340 [ Upstream commit 18ad4df091dd5d067d2faa8fce1180b79f7041a7 ] 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436 bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812 blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403 __blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517 blk_mq_get_new_requests block/blk-mq.c:2940 [inline] blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042 __submit_bio+0x331/0x6f0 block/blk-core.c:624 __submit_bio_noacct_mq block/blk-core.c:703 [inline] submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732 submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826 xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958 xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619 xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Freed by task 946: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0x118/0x6f0 mm/slub.c:3808 rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189 rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462 __do_softirq+0x1b0/0x7a2 kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 The buggy address belongs to the object at ffff888123839d68 which belongs to the cache bfq_io_cq of size 1360 The buggy address is located 336 bytes inside of freed 1360-byte region [ffff888123839d68, ffff88812383a2b8) The buggy address belongs to the physical page: page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838 head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488 raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 36eca89 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089340 commit 44d17459626052a2390457e550a12cb973506b2f upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 17, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089340 [ Upstream commit 18ad4df091dd5d067d2faa8fce1180b79f7041a7 ] 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436 bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812 blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403 __blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517 blk_mq_get_new_requests block/blk-mq.c:2940 [inline] blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042 __submit_bio+0x331/0x6f0 block/blk-core.c:624 __submit_bio_noacct_mq block/blk-core.c:703 [inline] submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732 submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826 xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958 xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619 xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Freed by task 946: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0x118/0x6f0 mm/slub.c:3808 rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189 rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462 __do_softirq+0x1b0/0x7a2 kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 The buggy address belongs to the object at ffff888123839d68 which belongs to the cache bfq_io_cq of size 1360 The buggy address is located 336 bytes inside of freed 1360-byte region [ffff888123839d68, ffff88812383a2b8) The buggy address belongs to the physical page: page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838 head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488 raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 36eca89 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089340 commit 44d17459626052a2390457e550a12cb973506b2f upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2089884 commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Koichiro Den <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
tuxedo-bot
pushed a commit
that referenced
this issue
Jan 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2088231 commit 3d041393ea8c815f773020fb4a995331a69c0139 upstream. Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Cc: [email protected] Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> [ Conflicts in mib.[ch], because commit 6982826fe5e5 ("mptcp: fallback to TCP after SYN+MPC drops"), and commit 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") are linked to new features, not available in this version. Resolving the conflicts is easy, simply adding the new lines declaring the new "endpoint attempt" MIB entry. Also a conflict in protocol.h, because commit fce68b0 ("mptcp: add scheduled in mptcp_subflow_context") is not in this version, and changes the context by introducing 'scheduled' variable just before. Also a conflict in pm_netlink.c, because commit 3aa3624 ("mptcp: avoid ssock usage in mptcp_pm_nl_create_listen_socket()") is not in this version, and refactor the function: that's fine, we can still set pm_listener before doing the 'listen()', taking 'ssock->sk' as 'ssk' is not defined before this refactoring. There is also a conflict because the context has been changed later in commit 69925a346acb ("mptcp: ensure listener is unhashed before updating the sk status"). ] Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have a major problem with my pulse gen 2 (5700u) where there is a complete system crash whenever I use anything that relies on heavy use of the GPU. Mainly affecting me when I have multiple youtube tabs open and I try to close one but it is happening to me multiple times a day now requiring a hard restart. I disabled hardware acceleration in chrome but still getting the issue.
The same bug is documented here -> https://gitlab.freedesktop.org/drm/amd/-/issues/2447
Some users are reporting better performance with 6.5 which I was hoping to try out.
Mesa version 23.1.3
Logs:
The text was updated successfully, but these errors were encountered: