mediatek: add support for Ruijie RG-X60 Pro (coolsnowwolf#11745)

Informations: - SoC : MediaTek MT7986A 2.0GHz - RAM : DDR3 512MiB (W634GU6QB) - Flash : SPI-NAND 128 MiB (W25N01GVZEIG) - WLAN : MediaTek MT7986A integration dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 4x4 - 5 GHz : a/n/ac/ax, MIMO 4x4 - Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE) 2500Mbps x 1 （Realtek RTL8221B-VB-CG） - UART : through-hole on PCB - [J500] GND, TX, RX, 3.3V (115200n1) - Buttons : Mesh, Reset - LEDs : 1x Power (Blue) 1x Turbo (Purple) - Power : 12 VDC, 3 A About MAC Address: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | WAN | 10:82:3D:XX:XX:9E | label | | LAN | 10:82:3D:XX:XX:9F | label+1 | | WLAN 2g | 10:82:3D:XX:XX:A0 | label+2 | | WLAN 5g | 10:82:3D:XX:XX:A1 | label+3 | +---------+-------------------+-----------+ Signed-off-by: Ashley Lee <[email protected]>
yjh126yjh · Jan 5, 2024 · e2a0954 · e2a0954
1 parent 4fa8c8b
commit e2a0954
Show file tree

Hide file tree

Showing 4 changed files with 286 additions and 1 deletion.
diff --git a/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts b/target/linux/mediatek/dts/mt7986a-ruijie-rg-x60-pro.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	compatible = "ruijie,rg-x60-pro", "mediatek,mt7986a";
+	model = "Ruijie RG-X60 Pro";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_system;
+		led-failsafe = &led_alarm;
+		led-running = &led_system;
+		led-upgrade = &led_alarm;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x11002000";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "reset";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		button-1 {
+			label = "mesh";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+		};
+	};
+
+	leds-gpio {
+		compatible = "gpio-leds";
+
+		led_system: led-0 {
+			label = "white:status";
+			gpios = <&pio 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led_alarm: led-1 {
+			label = "purple:status";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy7>;
+		phy-mode = "2500base-x";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@1f {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	phy7: phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <7>;
+		reset-assert-us = <100000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		realtek,aldps-enable;
+	};
+};
+
+&pio {
+	spi_flash_pins: spi-flash-pins-33-to-38 {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <0>; /* bias-disable */
+		};
+	};
+
+	wf_2g_5g_pins: wf_2g_5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x200000>;
+				read-only;
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x200000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "product_info";
+				reg = <0x580000 0x80000>;
+				read-only;
+			};
+
+			partition@600000 {
+				label = "kdump";
+				reg = <0x600000 0x80000>;
+				read-only;
+			};
+
+			partition@680000 {
+				label = "ubi";
+				reg = <0x680000 0x3f00000>;
+			};
+		};
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -10,7 +10,8 @@ mediatek_setup_interfaces()
 	case $board in
 	asus,tuf-ax4200|\
 	jdcloud,re-cs-05|\
-	netcore,n60)
+	netcore,n60|\
+	ruijie,rg-x60-pro)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1
 		;;
 	bananapi,bpi-r3)
@@ -98,6 +99,11 @@ mediatek_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		label_mac=$wan_mac
 		;;
+	ruijie,rg-x60-pro)
+		label_mac=$(mtd_get_mac_ascii product_info ethaddr)
+		wan_mac=$label_mac
+		lan_mac=$(macaddr_add "$label_mac" 1)
+		;;
 	xiaomi,mi-router-wr30u|\
 	xiaomi,mi-router-ax3000t|\
 	xiaomi,redmi-router-ax6000)

diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -50,6 +50,11 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
 		;;
+	ruijie,rg-x60-pro)
+		addr=$(mtd_get_mac_ascii product_info ethaddr)
+		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
+		;;
 	tplink,tl-xdr4288|\
 	tplink,tl-xdr6086|\
 	tplink,tl-xdr6088)

diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
@@ -326,6 +326,16 @@ define Device/qihoo_360t7
 endef
 TARGET_DEVICES += qihoo_360t7
 
+define Device/ruijie_rg-x60-pro
+  DEVICE_VENDOR := Ruijie
+  DEVICE_MODEL := RG-X60 Pro
+  DEVICE_DTS := mt7986a-ruijie-rg-x60-pro
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += ruijie_rg-x60-pro
+
 define Device/tplink_tl-common
   DEVICE_VENDOR := TP-Link
   DEVICE_DTS_DIR := ../dts