USB Storage: add rio karma eject support

This changeset from Keith Bennett (via Bob Copeland) moves the Karma
initializer to its own file and adds trapping of the START_STOP command to
enable eject of the device.

Signed-off-by: Keith Bennett <[email protected]>
Signed-off-by: Bob Copeland <[email protected]>
Signed-off-by: Matthew Dharm <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

drivers/usb/storage/Kconfig

@@ -135,6 +135,18 @@ config USB_STORAGE_ONETOUCH
 	  this input in any keybinding software. (e.g. gnome's keyboard short-
 	  cuts)
 
+config USB_STORAGE_KARMA
+	bool "Support for Rio Karma music player"
+	depends on USB_STORAGE
+	help
+	  Say Y here to include additional code to support the Rio Karma
+	  USB interface.
+
+	  This code places the Rio Karma into mass storage mode, enabling
+	  it to be mounted as an ordinary filesystem. Performing an eject
+	  on the resulting scsi device node returns the Karma to normal
+	  operation.
+
 config USB_LIBUSUAL
 	bool "The shared table of common (or usual) storage devices"
 	depends on USB

drivers/usb/storage/Makefile

@@ -20,6 +20,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= datafab.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o $(usb-storage-obj-y)

drivers/usb/storage/initializers.c

@@ -45,12 +45,6 @@
 #include "debug.h"
 #include "transport.h"
 
-#define RIO_MSC 0x08
-#define RIOP_INIT "RIOP\x00\x01\x08"
-#define RIOP_INIT_LEN 7
-#define RIO_SEND_LEN 40
-#define RIO_RECV_LEN 0x200
-
 /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
  * mode */
 int usb_stor_euscsi_init(struct us_data *us)
@@ -97,70 +91,3 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 
 	return (res ? -1 : 0);
 }
-
-/* Place the Rio Karma into mass storage mode.
- *
- * The initialization begins by sending 40 bytes starting
- * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
- * packet with the high four bits set and everything else null.
- *
- * Next, we send RIOP\x80\x00\x08\x00.  Each time, a 512 byte response
- * must be read, but we must loop until byte 5 in the response is 0x08,
- * indicating success.  */
-int rio_karma_init(struct us_data *us)
-{
-	int result, partial;
-	char *recv;
-	unsigned long timeout;
-
-	// us->iobuf is big enough to hold cmd but not receive
-	if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
-		goto die_nomem;
-
-	US_DEBUGP("Initializing Karma...\n");
-
-	memset(us->iobuf, 0, RIO_SEND_LEN);
-	memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
-
-	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
-		us->iobuf, RIO_SEND_LEN, &partial);
-	if (result != USB_STOR_XFER_GOOD)
-		goto die;
-
-	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
-		recv, RIO_RECV_LEN, &partial);
-	if (result != USB_STOR_XFER_GOOD)
-		goto die;
-
-	us->iobuf[4] = 0x80;
-	us->iobuf[5] = 0;
-	timeout = jiffies + msecs_to_jiffies(3000);
-	for (;;) {
-		US_DEBUGP("Sending init command\n");
-		result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
-			us->iobuf, RIO_SEND_LEN, &partial);
-		if (result != USB_STOR_XFER_GOOD)
-			goto die;
-
-		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
-			recv, RIO_RECV_LEN, &partial);
-		if (result != USB_STOR_XFER_GOOD)
-			goto die;
-
-		if (recv[5] == RIO_MSC)
-			break;
-		if (time_after(jiffies, timeout))
-			goto die;
-		msleep(10);
-	}
-	US_DEBUGP("Karma initialized.\n");
-	kfree(recv);
-	return 0;
-
-die:
-	kfree(recv);
-die_nomem:
-	US_DEBUGP("Could not initialize karma.\n");
-	return USB_STOR_TRANSPORT_FAILED;
-}
-

drivers/usb/storage/initializers.h

@@ -47,4 +47,3 @@ int usb_stor_euscsi_init(struct us_data *us);
 /* This function is required to activate all four slots on the UCR-61S2B
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
-int rio_karma_init(struct us_data *us);

drivers/usb/storage/karma.c

@@ -0,0 +1,155 @@
+/* Driver for Rio Karma
+ *
+ *   (c) 2006 Bob Copeland <[email protected]>
+ *   (c) 2006 Keith Bennett <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "debug.h"
+#include "karma.h"
+
+#define RIO_PREFIX "RIOP\x00"
+#define RIO_PREFIX_LEN 5
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
+#define RIO_ENTER_STORAGE 0x1
+#define RIO_LEAVE_STORAGE 0x2
+#define RIO_RESET 0xC
+
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
+
+struct karma_data {
+	int in_storage;
+	char *recv;
+};
+
+/*
+ * Send commands to Rio Karma.
+ *
+ * For each command we send 40 bytes starting 'RIOP\0' followed by
+ * the command number and a sequence number, which the device will ack
+ * with a 512-byte packet with the high four bits set and everything
+ * else null.  Then we send 'RIOP\x80' followed by a zero and the
+ * sequence number, until byte 5 in the response repeats the sequence
+ * number.
+ */
+static int rio_karma_send_command(char cmd, struct us_data *us)
+{
+	int result, partial;
+	unsigned long timeout;
+	static unsigned char seq = 1;
+	struct karma_data *data = (struct karma_data *) us->extra;
+
+	US_DEBUGP("karma: sending command %04x\n", cmd);
+	memset(us->iobuf, 0, RIO_SEND_LEN);
+	memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN);
+	us->iobuf[5] = cmd;
+	us->iobuf[6] = seq;
+
+	timeout = jiffies + msecs_to_jiffies(6000);
+	for (;;) {
+		result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			us->iobuf, RIO_SEND_LEN, &partial);
+		if (result != USB_STOR_XFER_GOOD)
+			goto err;
+
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			data->recv, RIO_RECV_LEN, &partial);
+		if (result != USB_STOR_XFER_GOOD)
+			goto err;
+
+		if (data->recv[5] == seq)
+			break;
+
+		if (time_after(jiffies, timeout))
+			goto err;
+
+		us->iobuf[4] = 0x80;
+		us->iobuf[5] = 0;
+		msleep(50);
+	}
+
+	seq++;
+	if (seq == 0)
+		seq = 1;
+
+	US_DEBUGP("karma: sent command %04x\n", cmd);
+	return 0;
+err:
+	US_DEBUGP("karma: command %04x failed\n", cmd);
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Trap START_STOP and READ_10 to leave/re-enter storage mode.
+ * Everything else is propagated to the normal bulk layer.
+ */
+int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int ret;
+	struct karma_data *data = (struct karma_data *) us->extra;
+
+	if (srb->cmnd[0] == READ_10 && !data->in_storage) {
+		ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+		if (ret)
+			return ret;
+
+		data->in_storage = 1;
+		return usb_stor_Bulk_transport(srb, us);
+	} else if (srb->cmnd[0] == START_STOP) {
+		ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us);
+		if (ret)
+			return ret;
+
+		data->in_storage = 0;
+		return rio_karma_send_command(RIO_RESET, us);
+	}
+	return usb_stor_Bulk_transport(srb, us);
+}
+
+static void rio_karma_destructor(void *extra)
+{
+	struct karma_data *data = (struct karma_data *) extra;
+	kfree(data->recv);
+}
+
+int rio_karma_init(struct us_data *us)
+{
+	int ret = 0;
+	struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+	if (!data)
+		goto out;
+
+	data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
+	if (!data->recv) {
+		kfree(data);
+		goto out;
+	}
+
+	us->extra = data;
+	us->extra_destructor = rio_karma_destructor;
+	ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+	data->in_storage = (ret == 0);
+out:
+	return ret;
+}

drivers/usb/storage/karma.h

@@ -0,0 +1,7 @@
+#ifndef _KARMA_USB_H
+#define _KARMA_USB_H
+
+extern int rio_karma_init(struct us_data *us);
+extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+#endif

drivers/usb/storage/unusual_devs.h

@@ -221,7 +221,7 @@ UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 		"Rio",
 		"Rio Karma",
-		US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 
 /* Patch submitted by Philipp Friedrich <[email protected]> */
 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,

drivers/usb/storage/usb.c

@@ -98,6 +98,9 @@
 #ifdef CONFIG_USB_STORAGE_ALAUDA
 #include "alauda.h"
 #endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+#include "karma.h"
+#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <[email protected]>");
@@ -646,6 +649,14 @@ static int get_transport(struct us_data *us)
 		break;
 #endif
 
+#ifdef CONFIG_USB_STORAGE_KARMA
+	case US_PR_KARMA:
+		us->transport_name = "Rio Karma/Bulk";
+		us->transport = rio_karma_transport;
+		us->transport_reset = usb_stor_Bulk_reset;
+		break;
+#endif
+
 	default:
 		return -EIO;
 	}

include/linux/usb_usual.h

@@ -108,6 +108,9 @@ enum { US_DO_ALL_FLAGS };
 #ifdef CONFIG_USB_STORAGE_ALAUDA
 #define US_PR_ALAUDA    0xf4		/* Alauda chipsets */
 #endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+#define US_PR_KARMA     0xf5		/* Rio Karma */
+#endif
 
 #define US_PR_DEVICE	0xff		/* Use device's value */