#1602: CMake: clean up configuration printing

cmake/configure_options.cmake

@@ -19,6 +19,8 @@ else()
 endif()
 list(REMOVE_DUPLICATES VT_CONFIG_TYPES)
 
+list(APPEND CMAKE_MESSAGE_INDENT "Building VT with ")
+
 option(vt_lb_enabled "Build VT with load balancing enabled" ON)
 option(vt_trace_enabled "Build VT with trace enabled" OFF)
 option(vt_priorities_enabled "Build VT with message priorities enabled" ON)
@@ -34,65 +36,65 @@ set(
 )
 
 if (${vt_test_trace_runtime_enabled})
-    message(STATUS "Building VT with runtime tracing enabled (for testing)")
+    message(STATUS "runtime tracing enabled (for testing)")
     set(vt_feature_cmake_test_trace_on "1")
 else()
     set(vt_feature_cmake_test_trace_on "0")
 endif()
 
 if (${vt_lb_enabled})
-    message(STATUS "Building VT with load balancing enabled")
+    message(STATUS "load balancing enabled")
     set(vt_feature_cmake_lblite "1")
 else()
-    message(STATUS "Building VT with load balancing disabled")
+    message(STATUS "load balancing disabled")
     set(vt_feature_cmake_lblite "0")
 endif()
 
 if (${vt_trace_enabled})
-    message(STATUS "Building VT with tracing enabled")
+    message(STATUS "tracing enabled")
     set(vt_feature_cmake_trace_enabled "1")
 else()
-    message(STATUS "Building VT with tracing disabled")
+    message(STATUS "tracing disabled")
     set(vt_feature_cmake_trace_enabled "0")
 endif()
 
 # This will be set to 1 during generation of cmake config for vt-trace target
 set(vt_feature_cmake_trace_only "0")
 
 if (${vt_priorities_enabled})
-    message(STATUS "Building VT with priorities enabled")
+    message(STATUS "priorities enabled")
     message(
             STATUS
-            "Building VT with priority bits per level: ${vt_priority_bits_per_level}"
+            "priority bits per level: ${vt_priority_bits_per_level}"
     )
     set(vt_feature_cmake_priorities "1")
 else()
-    message(STATUS "Building VT with priorities disabled")
+    message(STATUS "priorities disabled")
     set(vt_feature_cmake_priorities "0")
 endif()
 
 set(vt_feature_cmake_priority_bits_level "${vt_priority_bits_per_level}")
 
 if (${vt_bit_check_overflow})
-    message(STATUS "Building VT with bit check overflow")
+    message(STATUS "bit check overflow")
     set(vt_feature_cmake_bit_check_overflow "1")
 else()
     set(vt_feature_cmake_bit_check_overflow "0")
 endif()
 
 if (${vt_fcontext_enabled})
-    message(STATUS "Building VT with fcontext (ULT) enabled")
+    message(STATUS "fcontext (ULT) enabled")
     set(vt_feature_cmake_fcontext "1")
 else()
-    message(STATUS "Building VT with fcontext (ULT) disabled")
+    message(STATUS "fcontext (ULT) disabled")
     set(vt_feature_cmake_fcontext "0")
 endif()
 
 if (${vt_mimalloc_enabled})
-    message(STATUS "Building VT with mimalloc enabled")
+    message(STATUS "mimalloc enabled")
     set(vt_feature_cmake_mimalloc "1")
 else()
-    message(STATUS "Building VT with mimalloc disabled")
+    message(STATUS "mimalloc disabled")
     set(vt_feature_cmake_mimalloc "0")
 endif()
 
@@ -104,76 +106,67 @@ else()
 endif()
 
 if ((vt_mpi_guards OR vt_trace_only) AND PERL_FOUND)
-    message(STATUS "Building VT with user MPI prevention guards enabled")
+    message(STATUS "user MPI prevention guards enabled")
     set(vt_feature_cmake_mpi_access_guards "1")
 elseif ((vt_mpi_guards OR vt_trace_only) AND NOT PERL_FOUND)
     # No perl? Can't generate wrapper source file.
-    message(STATUS "Building VT with user MPI prevention guards disabled (requested, but perl not found)")
+    message(STATUS "user MPI prevention guards disabled (requested, but perl not found)")
     set(vt_feature_cmake_mpi_access_guards "0")
 else()
-    message(STATUS "Building VT with user MPI prevention guards disabled")
+    message(STATUS "user MPI prevention guards disabled")
     set(vt_feature_cmake_mpi_access_guards "0")
 endif()
 
 option(vt_zoltan_enabled "Build VT with Zoltan" OFF)
 if (vt_zoltan_enabled AND vt_zoltan_found)
-    message(STATUS "Building VT with zoltan enabled")
+    message(STATUS "zoltan enabled")
     set(vt_feature_cmake_zoltan "1")
 elseif (vt_zoltan_enabled AND NOT vt_zoltan_found)
-    message(STATUS "Building VT with zoltan disabled (requested, but Zoltan not found)")
+    message(STATUS "zoltan disabled (requested, but Zoltan not found)")
     set(vt_feature_cmake_zoltan "0")
 else()
-    message(STATUS "Building VT with zoltan disabled")
+    message(STATUS "zoltan disabled")
     set(vt_feature_cmake_zoltan "0")
 endif()
 
-option(vt_ci_build "Build VT with CI mode on" OFF)
-if(${vt_ci_build})
-    set(vt_feature_cmake_ci_build "1")
-else()
-    set(vt_feature_cmake_ci_build "0")
-endif()
-
 if (LOWERCASE_CMAKE_BUILD_TYPE STREQUAL "release")
     option(vt_debug_verbose "Build VT with verbose debug printing enabled" OFF)
 else()
     option(vt_debug_verbose "Build VT with verbose debug printing enabled" ON)
 endif()
 
 if(vt_debug_verbose)
-    message(STATUS "Building VT with verbose debug printing enabled")
+    message(STATUS "verbose debug printing enabled")
     set(vt_feature_cmake_debug_verbose "1")
 else()
-    message(STATUS "Building VT with verbose debug printing disabled")
+    message(STATUS "verbose debug printing disabled")
     set(vt_feature_cmake_debug_verbose "0")
 endif()
 
-message(STATUS "CI_BUILD = ${vt_feature_cmake_ci_build}")
-
 option(
         vt_diagnostics_runtime_enabled
         "Build VT with performance metrics/stats enabled at runtime by default" OFF
 )
 if (vt_diagnostics_enabled)
-    message(STATUS "Building VT with diagnostics (performance stats) enabled")
+    message(STATUS "diagnostics (performance stats) enabled")
     set(vt_feature_cmake_diagnostics "1")
 
     if (vt_diagnostics_runtime_enabled)
         message(
                 STATUS
-                "Building VT with diagnostics (performance stats) enabled at runtime by default"
+                "diagnostics (performance stats) enabled at runtime by default"
         )
         set(vt_feature_cmake_diagnostics_runtime "1")
     else()
         message(
                 STATUS
-                "Building VT with diagnostics (performance stats) disabled at runtime by default"
+                "diagnostics (performance stats) disabled at runtime by default"
         )
         set(vt_feature_cmake_diagnostics_runtime "0")
     endif()
 
 else()
-    message(STATUS "Building VT with diagnostics (performance stats) disabled")
+    message(STATUS "diagnostics (performance stats) disabled")
     set(vt_feature_cmake_diagnostics "0")
     set(vt_feature_cmake_diagnostics_runtime "0")
 endif()
@@ -183,10 +176,10 @@ option(
         "Build VT with assertions and debug prints disabled" OFF
 )
 if (${vt_production_build_enabled})
-    message(STATUS "Building VT with assertions and debug prints disabled")
+    message(STATUS "assertions and debug prints disabled")
     set(vt_feature_cmake_production_build "1")
 else()
-    message(STATUS "Building VT with assertions and debug prints enabled")
+    message(STATUS "assertions and debug prints enabled")
     set(vt_feature_cmake_production_build "0")
 endif()
 
@@ -203,9 +196,20 @@ set (vt_feature_cmake_print_term_msgs "0")
 set (vt_feature_cmake_no_pool_alloc_env "0")
 
 if (${vt_pool_enabled})
-    message(STATUS "Building VT with memory pool enabled")
+    message(STATUS "memory pool enabled")
     set (vt_feature_cmake_memory_pool "1")
 else()
-    message(STATUS "Building VT with memory pool disabled")
+    message(STATUS "memory pool disabled")
     set (vt_feature_cmake_memory_pool "0")
 endif()
+
+option(vt_ci_build "Build VT with CI mode on" OFF)
+if(${vt_ci_build})
+    set(vt_feature_cmake_ci_build "1")
+else()
+    set(vt_feature_cmake_ci_build "0")
+endif()
+
+list(POP_BACK CMAKE_MESSAGE_INDENT)
+
+message(STATUS "CI_BUILD = ${vt_feature_cmake_ci_build}")