apache · xiaoxiang781216 · Dec 17, 2024 · Dec 17, 2024
diff --git a/arch/arm/src/at32/at32_gpio.c b/arch/arm/src/at32/at32_gpio.c
@@ -32,12 +32,19 @@
 #include <errno.h>
 #include <debug.h>
 #include <nuttx/irq.h>
+#include <nuttx/spinlock.h>
 
 #include "arm_internal.h"
 #include "chip.h"
 #include "at32_syscfg.h"
 #include "at32_gpio.h"
 
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 /****************************************************************************
  * Public Data
  ****************************************************************************/
@@ -199,7 +206,7 @@ int at32_configgpio(uint32_t cfgset)
    * exclusive access to all of the GPIO configuration registers.
    */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Determine the alternate function (Only alternate function pins) */
 
@@ -355,7 +362,7 @@ int at32_configgpio(uint32_t cfgset)
       putreg32(regval, regaddr);
     }
 
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }
 #endif

diff --git a/arch/arm/src/eoss3/eoss3_gpio.c b/arch/arm/src/eoss3/eoss3_gpio.c
@@ -29,6 +29,7 @@
 
 #include <arch/board/board.h>
 #include <nuttx/irq.h>
+#include <nuttx/spinlock.h>
 
 #include "arm_internal.h"
 #include "chip.h"
@@ -57,6 +58,8 @@
  * Private Data
  ****************************************************************************/
 
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 /****************************************************************************
  * Private Functions
  ****************************************************************************/
@@ -82,7 +85,7 @@ int eoss3_configgpio(gpio_pinset_t cfgset)
   uint16_t sel_idx = \
     (input & EOSS3_PAD_SEL_IDX_MASK) >> EOSS3_PAD_SEL_IDX_SHIFT;
 
-  irqstate_t flags = enter_critical_section();
+  irqstate_t flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Check select index, if it is 0 we are not working with an input */
 
@@ -111,7 +114,7 @@ int eoss3_configgpio(gpio_pinset_t cfgset)
     }
 
   putreg32(ctrl, EOSS3_PAD_X_CTRL(pad));
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }
 
@@ -141,7 +144,7 @@ void eoss3_gpiowrite(gpio_pinset_t cfgset, bool value)
   uint8_t iobit = (cfgset & GPIO_REG_BIT_MASK) >> GPIO_REG_BIT_SHIFT;
   if (cfgset & GPIO_REG_EN_MASK)
     {
-      irqstate_t flags = enter_critical_section();
+      irqstate_t flags = spin_lock_irqsave(&g_configgpio_lock);
       if (value)
         {
           putreg32(
@@ -155,7 +158,7 @@ void eoss3_gpiowrite(gpio_pinset_t cfgset, bool value)
             EOSS3_MISC_IO_OUTPUT);
         }
 
-      leave_critical_section(flags);
+      spin_unlock_irqrestore(&g_configgpio_lock, flags);
     }
 }
 

diff --git a/arch/arm/src/nuc1xx/nuc_gpio.c b/arch/arm/src/nuc1xx/nuc_gpio.c
@@ -31,6 +31,7 @@
 #include <debug.h>
 
 #include <nuttx/irq.h>
+#include <nuttx/spinlock.h>
 #include <arch/nuc1xx/chip.h>
 
 #include "arm_internal.h"
@@ -43,6 +44,12 @@
  * Pre-processor Definitions
  ****************************************************************************/
 
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 /****************************************************************************
  * Private Functions
  ****************************************************************************/
@@ -240,7 +247,7 @@ void nuc_gpiowrite(gpio_cfgset_t pinset, bool value)
 
   /* Disable interrupts -- the following operations must be atomic */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Allow writing only to the selected pin in the DOUT register */
 
@@ -249,7 +256,7 @@ void nuc_gpiowrite(gpio_cfgset_t pinset, bool value)
   /* Set the pin to the selected value and re-enable interrupts */
 
   putreg32(((uint32_t)value << pin), base + NUC_GPIO_DOUT_OFFSET);
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
 #endif
 }
 

diff --git a/arch/arm/src/sam34/sam4l_gpio.c b/arch/arm/src/sam34/sam4l_gpio.c
@@ -33,6 +33,7 @@
 
 #include <nuttx/irq.h>
 #include <nuttx/arch.h>
+#include <nuttx/spinlock.h>
 #include <arch/board/board.h>
 
 #include "arm_internal.h"
@@ -45,6 +46,8 @@
  ****************************************************************************/
 
 #ifdef CONFIG_DEBUG_GPIO_INFO
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 static const char g_portchar[4]   =
 {
   'A', 'B', 'C', 'D'
@@ -529,7 +532,7 @@ int sam_dumpgpio(uint32_t pinset, const char *msg)
 
   /* The following requires exclusive access to the GPIO registers */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   gpioinfo("GPIO%c pinset: %08x base: %08x -- %s\n",
            g_portchar[port], pinset, base, msg);
@@ -559,7 +562,7 @@ int sam_dumpgpio(uint32_t pinset, const char *msg)
            getreg32(base + SAM_GPIO_PARAMETER_OFFSET),
            getreg32(base + SAM_GPIO_VERSION_OFFSET));
 
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }
 #endif
diff --git a/arch/arm/src/sam34/sam_gpio.c b/arch/arm/src/sam34/sam_gpio.c
@@ -33,6 +33,7 @@
 
 #include <nuttx/irq.h>
 #include <nuttx/arch.h>
+#include <nuttx/spinlock.h>
 #include <arch/board/board.h>
 
 #include "arm_internal.h"
@@ -55,6 +56,8 @@
  * Private Data
  ****************************************************************************/
 
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 #ifdef CONFIG_DEBUG_GPIO_INFO
 static const char g_portchar[4]   =
 {
@@ -476,7 +479,7 @@ int sam_configgpio(gpio_pinset_t cfgset)
 
   /* Disable interrupts to prohibit re-entrance. */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Enable writing to GPIO registers */
 
@@ -511,7 +514,7 @@ int sam_configgpio(gpio_pinset_t cfgset)
   /* Disable writing to GPIO registers */
 
   putreg32(PIO_WPMR_WPEN | PIO_WPMR_WPKEY, base + SAM_PIO_WPMR_OFFSET);
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
 
   return ret;
 }
@@ -588,7 +591,7 @@ int sam_dumpgpio(uint32_t pinset, const char *msg)
 
   /* The following requires exclusive access to the GPIO registers */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   gpioinfo("PIO%c pinset: %08x base: %08x -- %s\n",
         g_portchar[port], pinset, base, msg);
@@ -646,7 +649,7 @@ int sam_dumpgpio(uint32_t pinset, const char *msg)
 #endif
 #endif
 
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }
 #endif
diff --git a/arch/arm/src/samv7/sam_gpio.c b/arch/arm/src/samv7/sam_gpio.c
@@ -33,6 +33,7 @@
 
 #include <nuttx/irq.h>
 #include <nuttx/arch.h>
+#include <nuttx/spinlock.h>
 #include <arch/board/board.h>
 
 #include "arm_internal.h"
@@ -75,6 +76,8 @@
  * Private Data
  ****************************************************************************/
 
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 #ifdef CONFIG_DEBUG_GPIO_INFO
 static const char g_portchar[SAMV7_NPIO] =
 {
@@ -497,7 +500,7 @@ int sam_configgpio(gpio_pinset_t cfgset)
 
   /* Disable interrupts to prohibit re-entrance. */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Enable writing to GPIO registers */
 
@@ -606,7 +609,7 @@ int sam_dumpgpio(uint32_t pinset, const char *msg)
 
   /* The following requires exclusive access to the GPIO registers */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   gpioinfo("PIO%c pinset: %08x base: %08x -- %s\n",
            g_portchar[port], pinset, base, msg);

diff --git a/arch/arm/src/stm32/stm32_gpio.c b/arch/arm/src/stm32/stm32_gpio.c
@@ -33,6 +33,7 @@
 #include <debug.h>
 
 #include <nuttx/irq.h>
+#include <nuttx/spinlock.h>
 
 #include "arm_internal.h"
 #include "chip.h"
@@ -43,6 +44,12 @@
 #  pragma message "CONFIG_STM32_USE_LEGACY_PINMAP will be deprecated migrate board.h see tools/stm32_pinmap_tool.py"
 #endif
 
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 /****************************************************************************
  * Public Data
  ****************************************************************************/
@@ -299,7 +306,7 @@ int stm32_configgpio(uint32_t cfgset)
    * exclusive access to all of the GPIO configuration registers.
    */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Decode the mode and configuration */
 
@@ -339,7 +346,7 @@ int stm32_configgpio(uint32_t cfgset)
         {
           /* Its an alternate function pin... we can return early */
 
-          leave_critical_section(flags);
+          spin_unlock_irqrestore(&g_configgpio_lock, flags);
           return OK;
         }
     }
@@ -366,7 +373,7 @@ int stm32_configgpio(uint32_t cfgset)
         {
           /* Neither... we can return early */
 
-          leave_critical_section(flags);
+          spin_unlock_irqrestore(&g_configgpio_lock, flags);
           return OK;
         }
     }
@@ -393,7 +400,7 @@ int stm32_configgpio(uint32_t cfgset)
   regval |= (1 << pin);
   putreg32(regval, regaddr);
 
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }
 #endif
@@ -468,7 +475,7 @@ int stm32_configgpio(uint32_t cfgset)
    * exclusive access to all of the GPIO configuration registers.
    */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Determine the alternate function (Only alternate function pins) */
 
@@ -684,7 +691,7 @@ int stm32_configgpio(uint32_t cfgset)
       putreg32(regval, regaddr);
     }
 
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }
 #endif

diff --git a/arch/arm/src/stm32f0l0g0/stm32_gpio.c b/arch/arm/src/stm32f0l0g0/stm32_gpio.c
@@ -34,6 +34,7 @@
 
 #include <arch/irq.h>
 #include <arch/stm32f0l0g0/chip.h>
+#include <nuttx/spinlock.h>
 
 #include "arm_internal.h"
 #include "chip.h"
@@ -49,6 +50,12 @@
 #  pragma message "CONFIG_STM32F0G0L0_USE_LEGACY_PINMAP will be deprecated migrate board.h see tools/stm32_pinmap_tool.py"
 #endif
 
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static spinlock_t g_configgpio_lock = SP_UNLOCKED;
+
 /****************************************************************************
  * Public Data
  ****************************************************************************/
@@ -178,7 +185,7 @@ int stm32_configgpio(uint32_t cfgset)
    * exclusive access to all of the GPIO configuration registers.
    */
 
-  flags = enter_critical_section();
+  flags = spin_lock_irqsave(&g_configgpio_lock);
 
   /* Now apply the configuration to the mode register */
 
@@ -339,7 +346,7 @@ int stm32_configgpio(uint32_t cfgset)
 #endif
     }
 
-  leave_critical_section(flags);
+  spin_unlock_irqrestore(&g_configgpio_lock, flags);
   return OK;
 }