Skip to content

1) System Settings

Jump to bottom
Devin R. Olsen edited this page Jul 9, 2017 · 1 revision

Found at the root menus; system settings allows you to configure the follow OS settings:

  • Date/Time Configuration
  • EC/PPM Range Configuration
  • PH Probes Calibration
  • EC Probes Calibration

Date/Time Configuration

Allows you to set the system's date and time. Use the up, down, left, right Key shield buttons to move around screen and change values. Once set, move cursor on screen to "done" option and press select to save. Once set you should never loose that configured time even if you loose power thanks to the RTC adapter.

EC/PPM Range Configuration

Allows you to configure the min and max EC/PPM range you would like your doser to be withing over your total solutions used.

PH Probes Calibration

Allows you to perform a three point calibration (4.0 low, 7.0 med, 14.0 high) on your pH probes.

EC Probes Calibration

Allows you to perform a three point calibration (dry, low, high) on your EC probes.

Clone this wiki locally