[Synchronization] messages.codes.SQLITE_MISUSE

[WhiskyForYourThoughts]

Detail of the issue

Hey guys, please excuse the ignorance, have just downloaded the latest version of Neuron Wallet for Mac ARM64, all set up good to go and first message I get is messages.codes.SQLITE_MISUSE and the sync will not start at all.

What have I done wrong?

bundled-ckb.log

No response

main.log

No response

status.log

No response

[yanguoyu]

Maybe you can try to clean cache by clicking. Neuron -> Preference -> Data -> Clean Cache -> Ok.

[WhiskyForYourThoughts]

Hi, Yes I had tried that too, not working. Tried to do again now and still not starting the sync. I also tried the option to fully rebuild index too. Says connecting, but nothing starting??   Regards, Wade.

…

On 20 Jan 2023, at 10:36 am, 严国宇 ***@***.***> wrote: Maybe you can try to clean cache by clicking. Neuron -> Preference -> Data -> Clean Cache -> Ok. — Reply to this email directly, view it on GitHub <#2575 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A5KIQPF2RYBVIHJ5BY4ILILWTHMZJANCNFSM6AAAAAAT66Z4DI>. You are receiving this because you authored the thread.

[yanguoyu]

Hi, Yes I had tried that too, not working. Tried to do again now and still not starting the sync. I also tried the option to fully rebuild index too. Says connecting, but nothing starting??   Regards, Wade.
…
On 20 Jan 2023, at 10:36 am, 严国宇 @.***> wrote: Maybe you can try to clean cache by clicking. Neuron -> Preference -> Data -> Clean Cache -> Ok. — Reply to this email directly, view it on GitHub <#2575 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5KIQPF2RYBVIHJ5BY4ILILWTHMZJANCNFSM6AAAAAAT66Z4DI. You are receiving this because you authored the thread.

I got that, Can you export the debug information for us to help you? You can export the debug information by clicking, Help -> Export debug information.

[WhiskyForYourThoughts]

Please forgive my ignorance, I’m not an engineer. I can’t export the debug info, when I try I get the following -  Regards, Wade.

…

On 20 Jan 2023, at 1:59 pm, 严国宇 ***@***.***> wrote: Hi, Yes I had tried that too, not working. Tried to do again now and still not starting the sync. I also tried the option to fully rebuild index too. Says connecting, but nothing starting??   Regards, Wade. … <x-msg://6/#> On 20 Jan 2023, at 10:36 am, 严国宇 @.***> wrote: Maybe you can try to clean cache by clicking. Neuron -> Preference -> Data -> Clean Cache -> Ok. — Reply to this email directly, view it on GitHub <#2575 (comment) <#2575 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5KIQPF2RYBVIHJ5BY4ILILWTHMZJANCNFSM6AAAAAAT66Z4DI. You are receiving this because you authored the thread. I got that, Can you export the debug information for us to help you? You can export the debug information by clicking, Help -> Export debug information. — Reply to this email directly, view it on GitHub <#2575 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A5KIQPCT7S72GFITNV5TAEDWTIEQ5ANCNFSM6AAAAAAT66Z4DI>. You are receiving this because you authored the thread.

[yanguoyu]

Please forgive my ignorance, I’m not an engineer. I can’t export the debug info, when I try I get the following -  Regards, Wade.
…
On 20 Jan 2023, at 1:59 pm, 严国宇 @.> wrote: Hi, Yes I had tried that too, not working. Tried to do again now and still not starting the sync. I also tried the option to fully rebuild index too. Says connecting, but nothing starting??   Regards, Wade. … x-msg://6/# On 20 Jan 2023, at 10:36 am, 严国宇 @.> wrote: Maybe you can try to clean cache by clicking. Neuron -> Preference -> Data -> Clean Cache -> Ok. — Reply to this email directly, view it on GitHub <#2575 (comment) <#2575 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5KIQPF2RYBVIHJ5BY4ILILWTHMZJANCNFSM6AAAAAAT66Z4DI. You are receiving this because you authored the thread. I got that, Can you export the debug information for us to help you? You can export the debug information by clicking, Help -> Export debug information. — Reply to this email directly, view it on GitHub <#2575 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5KIQPCT7S72GFITNV5TAEDWTIEQ5ANCNFSM6AAAAAAT66Z4DI. You are receiving this because you authored the thread.

I thought you miss some information in the reply.

[WhiskyForYourThoughts]

I am seeing the pop up message when I try to export the debug info - Error SQLITE_MISUSE: Database is closed

[WhiskyForYourThoughts]

So what now?

[Keith-CY]

So what now?

Hi @WhiskyForYourThoughts

Our developers are on a vocation for the lunar new year, and will reply in several days.

I noticed that Neuron was running on Mac but failed to export the log files, here are steps to open the directory of logs manually:

1. open an app named Terminal.app, it's a built-in app on macOS;
2. type open /Users/{Username}/Library/Application\ Support/Neuron/chains/mainnet/data/logs, hit Enter, the finder should be opened. Usually, there will be 3 log files: init.log, migrate.log, run.log. But in this case, it could be empty;
3. type open /Users/{Username}/Library/Logs/neuron, hit Enter, the finder should be opened. Usually, there will be several log files such as error.log, main.log, renderer.log. But in this case, it could be empty;

Please compress all log files into a compressed file and attach it to this issue, thanks.

Please note that {Username} in the path should be replaced by your actual username.

[WhiskyForYourThoughts]

Thank you, apologies I forgot about Lunar New Year. On point 2 there were only 2 files that appeared, init.log and run.log but no migrate.log On point 3 there was only one file that appeared, main.log and nothing else Folder attached  Regards, Wade.

…

On 21 Jan 2023, at 8:24 pm, Chen Yu ***@***.***> wrote: So what now? Hi @WhiskyForYourThoughts <https://github.com/WhiskyForYourThoughts> Our developers are on a vocation for the lunar new year, and will reply in several days. I noticed that Neuron was running on Mac but failed to export the log files, here are steps to open the directory of logs manually: open an app named Terminal.app, it's a built-in app on macOS; type open /Users/{Username}/Library/Application\ Support/Neuron/chains/mainnet/data/logs, hit Enter, the finder should be opened. Usually, there will be 3 log files: init.log, migrate.log, run.log. But in this case, it could be empty; type open /Users/{Username}/Library/Logs/neuron, hit Enter, the finder should be opened. Usually, there will be several log files such as error.log, main.log, renderer.log. But in this case, it could be empty; Please compress all log files into a compressed file and attach it to this issue. Please note that {Username} in the path should be replaced with your actual username. — Reply to this email directly, view it on GitHub <#2575 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A5KIQPBLUEUKZIRDJKZGN6LWTO2OTANCNFSM6AAAAAAT66Z4DI>. You are receiving this because you were mentioned.

[Keith-CY]

Thank you, apologies I forgot about Lunar New Year. On point 2 there were only 2 files that appeared, init.log and run.log but no migrate.log On point 3 there was only one file that appeared, main.log and nothing else Folder attached  Regards, Wade.
…
On 21 Jan 2023, at 8:24 pm, Chen Yu @.***> wrote: So what now? Hi @WhiskyForYourThoughts https://github.com/WhiskyForYourThoughts Our developers are on a vocation for the lunar new year, and will reply in several days. I noticed that Neuron was running on Mac but failed to export the log files, here are steps to open the directory of logs manually: open an app named Terminal.app, it's a built-in app on macOS; type open /Users/{Username}/Library/Application\ Support/Neuron/chains/mainnet/data/logs, hit Enter, the finder should be opened. Usually, there will be 3 log files: init.log, migrate.log, run.log. But in this case, it could be empty; type open /Users/{Username}/Library/Logs/neuron, hit Enter, the finder should be opened. Usually, there will be several log files such as error.log, main.log, renderer.log. But in this case, it could be empty; Please compress all log files into a compressed file and attach it to this issue. Please note that {Username} in the path should be replaced with your actual username. — Reply to this email directly, view it on GitHub <#2575 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5KIQPBLUEUKZIRDJKZGN6LWTO2OTANCNFSM6AAAAAAT66Z4DI. You are receiving this because you were mentioned.

Hi @WhiskyForYourThoughts

This reply is possibly sent via an e-mail, so the attachments are actually sent to GitHub Notification Service instead of being attached to this thread.

Please visit the GitHub web page of this thread #2575, and drag&drop the compressed file into the comment box directly. Then a link to the file will be generated so we get download logs through it.

[WhiskyForYourThoughts]

Neuron Logs.zip

[onebitlab]

Have same problem with 0.106.0 for ARM

[yanguoyu]

No native build was found for platform=darwin arch=arm64 runtime=electron abi=99 uv=1 armv=8 libc=glibc

I found these logs on the main.log. Maybe it is because typeorm is not correct for your computer OS version.

@WhiskyForYourThoughts What is your Mac OS version? Maybe you can download the x64 Neuron version. It can run with Rosetta 2 only lost some performance.

[WhiskyForYourThoughts]

Currently running Ventura 13.1

[yanguoyu]

Currently running Ventura 13.1

Got that, could you try the x64 Neuron version?

@Keith-CY Could you try the arm64 version with Ventura 13.1?

[WhiskyForYourThoughts]

Ok, thanks @yanguoyu should I be concerned with the limited performance, is there any risk to my CKB?

Does this version also allow support of importing a cold wallet like ledger?

[yanguoyu]

Ok, thanks @yanguoyu should I be concerned with the limited performance, is there any risk to my CKB?

Does this version also allow support of importing a cold wallet like ledger?

Of course, it's also a release version, but it will run with Rosetta 2 on M1.
https://github.com/nervosnetwork/neuron/releases/tag/v0.106.0

[WhiskyForYourThoughts]

Thanks @yanguoyu I've installed the x64 Neuron version and the sync has commenced 😊

[yanguoyu]

Thanks @yanguoyu I've installed the x64 Neuron version and the sync has commenced 😊

Cool, We will continue to fix the arm64 version.

[anipenguin]

hey guys, can the team put a little note indicating m1/m2 should download the x64 package on the current release page https://github.com/nervosnetwork/neuron/releases/tag/v0.106.0 for now? since the next version isn't out and more people with macOS are having this issue but not everyone can find this workaround intuitively.

[yanguoyu]

hey guys, can the team put a little note indicating m1/m2 should download the x64 package on the current release page https://github.com/nervosnetwork/neuron/releases/tag/v0.106.0 for now? since the next version isn't out and more people with macOS are having this issue but not everyone can find this workaround intuitively.

Thank you for your suggestion, We will consider it seriously.

[Keith-CY]

hey guys, can the team put a little note indicating m1/m2 should download the x64 package on the current release page v0.106.0 (release) for now? since the next version isn't out and more people with macOS are having this issue but not everyone can find this workaround intuitively.

The message was added in [v0.106.0] Issues on upgrading to [email protected] and also appended in the release note

[github-actions]

Mark this issue stale because no activity for 60 days

[github-actions]

Close this issue because it's inactive since marked stale