qmk · tzarc · Mar 10, 2023 · Mar 3, 2023 · Mar 3, 2023 · Mar 3, 2023
diff --git a/keyboards/abacus/config.h b/keyboards/abacus/config.h
@@ -17,24 +17,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, D2, D4, C6 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D7, B3, E6, B2, B4, B6, B5}
-
 #define DIP_SWITCH_PINS { D0 }
 
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
 #define RGB_DI_PIN D1
 
 #ifdef RGB_DI_PIN

diff --git a/keyboards/abacus/info.json b/keyboards/abacus/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "D7", "B3", "E6", "B2", "B4", "B6", "B5"],
+        "rows": ["D3", "D2", "D4", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "F1", "pin_b": "F0"}

diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D3, C7 }
-#define MATRIX_COL_PINS { F0, B6, B5 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN E6
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 3

diff --git a/keyboards/abstract/ellipse/rev1/info.json b/keyboards/abstract/ellipse/rev1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "B6", "B5"],
+        "rows": ["D3", "C7"]
+    },
+    "diode_direction": "COL2ROW",
     "encoder": {
         "rotary": [
             {"pin_a": "B2", "pin_b": "B1", "resolution": 2},

diff --git a/keyboards/acekeyboard/titan60/config.h b/keyboards/acekeyboard/titan60/config.h
@@ -17,26 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-
-//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
-#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
-#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D0
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 6

diff --git a/keyboards/acekeyboard/titan60/info.json b/keyboards/acekeyboard/titan60/info.json
@@ -8,6 +8,11 @@
         "pid": "0x5449",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
+      "rows": ["B1", "B2", "B3", "F0", "F1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
       "pin": "B7",
       "breathing": true

diff --git a/keyboards/acheron/apollo/87h/delta/config.h b/keyboards/acheron/apollo/87h/delta/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
-//                        R0 , R1 , R2 , R3 , R4 , R5 
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/acheron/apollo/87h/delta/info.json b/keyboards/acheron/apollo/87h/delta/info.json
@@ -4,6 +4,11 @@
         "pid": "0x8775",
         "device_version": "0.0.4"
     },
+    "matrix_pins": {
+        "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+        "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F401",
     "bootloader": "stm32-dfu"
 }
diff --git a/keyboards/acheron/apollo/87h/gamma/config.h b/keyboards/acheron/apollo/87h/gamma/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15 }
-#define MATRIX_COL_PINS { B3 , A15, A10, A8 , B14, B12, B10, B1 , B0 , A7 , A4 , A5 , A6 , C15, A0 , A1  }
-//                        R0 , R1 , R2 , R3 , R4 , R5
-#define MATRIX_ROW_PINS { C14, C13, B9 , B4 , A3 , A2 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/acheron/apollo/87h/gamma/info.json b/keyboards/acheron/apollo/87h/gamma/info.json
@@ -4,6 +4,11 @@
         "pid": "0x8774",
         "device_version": "0.0.3"
     },
+    "matrix_pins": {
+        "cols": ["B3", "A15", "A10", "A8", "B14", "B12", "B10", "B1", "B0", "A7", "A4", "A5", "A6", "C15", "A0", "A1"],
+        "rows": ["C14", "C13", "B9", "B4", "A3", "A2"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F411",
     "bootloader": "stm32-dfu"
 }
diff --git a/keyboards/acheron/apollo/87htsc/config.h b/keyboards/acheron/apollo/87htsc/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
-//                        R0 , R1 , R2 , R3 , R4 , R5 
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/acheron/apollo/87htsc/info.json b/keyboards/acheron/apollo/87htsc/info.json
@@ -8,6 +8,11 @@
         "pid": "0x8776",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+        "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F401",
     "bootloader": "stm32-dfu",
     "layouts": {

diff --git a/keyboards/acheron/apollo/88htsc/config.h b/keyboards/acheron/apollo/88htsc/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//                        C0 , C1 , C2 , C3 , C4 , C5 , C6 , C7 , C8 , C9 , C10, C11, C12, C13, C14, C15, C16 } 
-#define MATRIX_COL_PINS { C8 , C9 , A8 , A10, C7 , C6 , B14, B12, B10, B1 , C5 , C4 , A7 , B0 , C11, A3 , B4  }
-//                        R0 , R1 , R2 , R3 , R4 , R5 
-#define MATRIX_ROW_PINS { B3 , D2 , C12, A6 , A5 , A4 }
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/acheron/apollo/88htsc/info.json b/keyboards/acheron/apollo/88htsc/info.json
@@ -8,6 +8,11 @@
         "pid": "0x8873",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
+        "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F401",
     "bootloader": "stm32-dfu",
     "layouts": {

diff --git a/keyboards/acheron/arctic/config.h b/keyboards/acheron/arctic/config.h
@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B0, A5, A4, A3, A2, A1, A0, F1, F0, C15, C14, C13, B9, B8}
-#define MATRIX_ROW_PINS { B7, B6, A6, A7, B1}
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/acheron/arctic/info.json b/keyboards/acheron/arctic/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4152",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B0", "A5", "A4", "A3", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8"],
+        "rows": ["B7", "B6", "A6", "A7", "B1"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "layouts": {

diff --git a/keyboards/acheron/athena/alpha/config.h b/keyboards/acheron/athena/alpha/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { A8 , B14, B12, B10, B1 , B0 , A5 , A4 , A3 , A2 , A1 , A0 , C15, A7 , B4 , B3 , A15 }
-#define MATRIX_ROW_PINS { B9 , C13, B8 , B5 , A14 , C14 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE
 

diff --git a/keyboards/acheron/athena/alpha/info.json b/keyboards/acheron/athena/alpha/info.json
@@ -4,6 +4,11 @@
         "pid": "0x6584",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["A8", "B14", "B12", "B10", "B1", "B0", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "A7", "B4", "B3", "A15"],
+        "rows": ["B9", "C13", "B8", "B5", "A14", "C14"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 20,

diff --git a/keyboards/acheron/athena/beta/config.h b/keyboards/acheron/athena/beta/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { C7 , C6 , B14, B12, B10, B1 , C4 , A7 , A6 , A5 , A4 , A3 , A2 , C5 , A10, A8 , C9 }
-#define MATRIX_ROW_PINS { C11, C12, C10, A15, C0 , A1 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define LOCKING_SUPPORT_ENABLE
 #define LOCKING_RESYNC_ENABLE
 

diff --git a/keyboards/acheron/athena/beta/info.json b/keyboards/acheron/athena/beta/info.json
@@ -4,6 +4,11 @@
         "pid": "0x6585",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["C7", "C6", "B14", "B12", "B10", "B1", "C4", "A7", "A6", "A5", "A4", "A3", "A2", "C5", "A10", "A8", "C9"],
+        "rows": ["C11", "C12", "C10", "A15", "C0", "A1"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "B0",
         "levels": 20,

diff --git a/keyboards/acheron/austin/config.h b/keyboards/acheron/austin/config.h
@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B10, B11, B12, B13, B14, B15, A8, A9, A10, A5, A15, B3, B4, B5, B8, A3, C15, C14, F1 }
-#define MATRIX_ROW_PINS { C13, A4, A7, B0, B1, B2 }
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1

diff --git a/keyboards/acheron/austin/info.json b/keyboards/acheron/austin/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4175",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10", "A5", "A15", "B3", "B4", "B5", "B8", "A3", "C15", "C14", "F1"],
+        "rows": ["C13", "A4", "A7", "B0", "B1", "B2"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 6,

diff --git a/keyboards/acheron/elongate/beta/config.h b/keyboards/acheron/elongate/beta/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
-#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN D7
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 16

diff --git a/keyboards/acheron/elongate/beta/info.json b/keyboards/acheron/elongate/beta/info.json
@@ -8,6 +8,11 @@
         "pid": "0x454C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F6", "F4", "F1", "F0", "B2", "B1", "C6", "B0", "B3", "E6", "D4", "B4"],
+        "rows": ["D3", "B7", "D5", "B5", "D6"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "D1",
         "num_lock": "D2",

diff --git a/keyboards/acheron/elongate/delta/config.h b/keyboards/acheron/elongate/delta/config.h
@@ -17,12 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-#define MATRIX_COL_PINS { A10, A9, A8, B14, B12, B11, B10, B2, B1, A7, A5, B9, B8, B7, B6 }
-#define MATRIX_ROW_PINS { B3, A15, B0, B4, B5 }
-
-#define DIODE_DIRECTION COL2ROW
-
 #define BACKLIGHT_PWM_DRIVER PWMD3
 #define BACKLIGHT_PWM_CHANNEL 1
 #define BACKLIGHT_PAL_MODE 1

diff --git a/keyboards/acheron/elongate/delta/info.json b/keyboards/acheron/elongate/delta/info.json
@@ -8,6 +8,11 @@
         "pid": "0x454D",
         "device_version": "0.0.2"
     },
+    "matrix_pins": {
+        "cols": ["A10", "A9", "A8", "B14", "B12", "B11", "B10", "B2", "B1", "A7", "A5", "B9", "B8", "B7", "B6"],
+        "rows": ["B3", "A15", "B0", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "backlight": {
         "pin": "A6",
         "levels": 20,

diff --git a/keyboards/acheron/keebspcb/config.h b/keyboards/acheron/keebspcb/config.h
@@ -17,10 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define MATRIX_COL_PINS { B12, A1, A0, F1, F0, C15, C14, C13, B9, B8, B7, B6, B5}
-#define MATRIX_ROW_PINS { B4, B3, A2, A3, A4}
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/acheron/keebspcb/info.json b/keyboards/acheron/keebspcb/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4B45",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B12", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8", "B7", "B6", "B5"],
+        "rows": ["B4", "B3", "A2", "A3", "A4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "STM32F072",
     "bootloader": "stm32-dfu",
     "community_layouts": ["60_ansi_tsangan"],