Skip to content

u360gts configurator v3.0
Compare
Choose a tag to compare
@raul-ortega raul-ortega released this 08 Apr 20:05
· 173 commits to master since this release
3.0
a8f2280
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

Release notes

This version designed for configuring firmware version 10.x and newer. If you try it with older firmware versions you might experience some issues, therefore, it is strongly recommended to update to the latest firmware version.

What's new?

  • Firware flasher tab added. Now the firmware can be flashed without the need of external applications. Flash Loader Demonstrator is needed no more.
  • Welcome tab added, with direct links to information about boards and drivers, and contribution.
  • Paypal button for donations added for thosse people who would like to contribute.
    -Logging message tool added, in order to get more information about status, errors, connection...
  • MFD protocol simulation added.
  • Forcing checksum error option added to simulator.
  • A better and logical behavior when connecting and disconnecting, like detecting if cli mode is already enabled, and hiding or showing tabs depending on tracker status.
  • New logo (designed by Héctor Narbona).
  • Button CLI ENTER renamed to CONFIGURE, and CLI EXIT renamed to EXIT.

How to install and run u360gts-configurator v3.0?

1.- Download the zip file for your operative system
2.- Unzip the file in your hard disc.
3.- Browse to folder u360gts-configurator
4.- Double click on u360gts-configurator.exe file (Windows users), or on u360gts-configurator.dmg (Mac users).

How to Flash Firmware?

1.- Set the controller board to boot mode.

In case of Naze32 / Flip32 it is possible to set the controller board in boot mode from the configurator. To do it, it is necessary to connect, enter configuration mode and press the "BOOT MODE" button.

2.- The configurator must be in the «Offline» state. If necessary, press Disconnect button.

3.- Select 115200 baud.

4.- Click on Flash Firmware tab.

5.- Select the desired controller board and firmware version.

6.- Click on "Load firmware Online" button. After download proccess has finished, the total number of bytes appears on the progress bar.

7.- Among available option, only "Full chip erase" should be marked.

If the boot mode was activated from the configurator, "No reboot sequence" should also be marked.

8.- Click on «Flash Firmware» button.

If you want to flash a bluepill board you must keep the reset button pressed (in addition to having the jumper in boot mode), and release it immediately after clicking on «Flash Firmware».

9.- The flashing starts and the progress bar is filled with orange color.

After verification, if all went well, the message "Programming SUCCESSFUL" appears.

10.- Once the flashing process has finished, it is necessary to disconnect the power and remove the jumper from the boot pins (in the case of the bluepill change it to its 0 position).

11.- Apply power.

Instructions in spanish language are available at zona fpv - u360gts official thread

Assets 5
Loading