-
Notifications
You must be signed in to change notification settings - Fork 189
Compatibility
bb-qq edited this page Jan 23, 2022
·
15 revisions
This page summarizes the reports from users to investigate whether your hardware supports this driver or not. And you can find which ethernet dongle is popular.
You may also be interested in Popular Switches page to upgrade your network.
- Reports are accepted in this thread.
- Of course, creating an individual issue to explain details is welcome.
- Don't mind if there is already a report for the same environment.
- For other users, multiple reports are useful to determine stability and popularity.
I would appreciate it if you join here!
If you visited here from some external forums, please share URLs of them. I will gather reports from there and add them to this page.
-
Not work
- Failed to install the driver or the device is not recognized correctly
-
Work
- The device seems to work correctly
- It is expected to work stably, but further verification is needed.
-
Stable
- No major issue over 2 weeks
- No major issue with large file transfer(at least 30min, speed degradation due to thermal throttling may occur)
-
Unstable
- Disconnection or other major issues are observed under long-term use or high load condition
-
Slow
- The device works, but it has performance issues
- Older models or models that come with less memory seem to have stability/performance issues of the USB Host controller or kernel driver.
- However, since hardware seems to have individual differences, it is difficult to say whether drivers will work on your hardware or not.
- If you find the same configuration as yours in this table and want further information, click the "Status" and ask the author of its report.
| DS model | product | Status report | Note |
|---|---|---|---|
| DS918+ (apollolake) | Plannex USB-LAN2500R | Stable | Author's environment |
| DS918+ (apollolake) | CableCreation 2.5G Ethernet to USB Adapter | Stable | |
| DS918+ (apollolake) | CLUB 3D CAC-1420 | Work | 2 adapters |
| DS918+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS918+ (apollolake) | Cable Matters USB to 2.5G Ethernet Adapter | Work | |
| DS918+ (apollolake) | LLANO Wired 2500Mbps USB C 2.5G External Network Card | Work | |
| DS918+ (apollolake) | UGREEN USB C to 2.5G Ethernet Adapter | Work | Need to use the front port. |
| DS1019+ (apollolake) | CLUB 3D CAC-1420 | Stable | |
| DS1019+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS718+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS718+ (apollolake) | UGREEN USB C to 2.5G Ethernet Adapter | Stable | |
| DS718+ (apollolake) | ? | Work | |
| DS620slim (apollolake) | EDUP 2.5Gbps USB to Ethernet Adapter | Work | |
| DS418play (apollolake) | TP-Link TL-UE300 (1Gbps) | Work | |
| DS418play (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS218+ (apollolake) | TP-LINK TL-UG310 | Work | |
| DS218+ (apollolake) | CE-LINK RTL8153 Gigabit Ethernet Adapter | Work | |
| DS218+ (apollolake) | DriverGenius CUG025 | Work | |
| DS218+ (apollolake) | CLUB 3D CAC-1420 | Work | |
| DS218+ (apollolake) | TRENDnet TUC-ET2G | Work | only running with USB 480MBit/s |
| DS1821+ (v1000) | UGREEN USB C to 2.5G Ethernet Adapter | Work | Need to use the front port. |
| DS1520+ (geminilake) | CableCreation 2.5G Ethernet to USB Adapter | Stable | |
| DS1520+ (geminilake) | CLUB 3D CAC-1420 | Work | Enabling Jumbo Frames (MTU 9000 bytes) MAY cause the driver to hang after heavy network usage/transfers. |
| DS920+ (geminilake) | CSL USB 3.0 RJ45 Fast Ethernet (1Gbps) Adapter | Work | |
| DS920+ (geminilake) | CLUB 3D CAC-1420 | Work | |
| DS920+ (geminilake) | CLUB 3D CAC-1420 | Work | |
| DS920+ (geminilake) | TRENDnet TUC-ET2G | Work | only running with USB 480MBit/s |
| DS920+ (geminilake) | Plugable USBC-E2500 | Work | |
| DS920+ (geminilake) | CLUB 3D CAC-1420 | Unstable | |
| DS720+ (geminilake) | Alxum 2.5 Gigabit Ethernet Adapter | Work | |
| DS720+ (geminilake) | ? | Work | |
| DS420+ (geminilake) | Plugable USBC-E2500 | Unstable | |
| DS220+ (geminilake) | Ankmax UC312G2 | Unstable | |
| RS820+ (denverton) | CLUB 3D CAC-1420 | Work | right port (rear) |
| DVA3219 (denverton) | Noname USB 3.0 Ethernet Adapter | Work | |
| DS1618+ (denverton) | UGREEN USB C to 2.5G Ethernet Adapter | Work | |
| DS1618+ (denverton) | UGREEN USB C to 2.5G Ethernet Adapter | Stable | |
| DS3617xs (broadwell) | CableCreation 2.5G Ethernet to USB Adapter | Work | |
| DS916+ (braswell) | CLUB 3D CAC-1420 | Stable | Only stable when use r8152-braswell-2.12.0-3.spk |
| DS916+ (braswell) | CLUB 3D CAC-1420 | Unstable | |
| DS916+ (braswell) | CLUB 3D CAC-1420 | Work | Auto-negotiation issue with TP-Link TL-SG108-M2 switch. |
| DS716+ II (braswell) | CLUB 3D CAC-1420 | Work | |
| DS716+ (braswell) | CLUB 3D CAC-1420 | Work | |
| DS416play (braswell) | i-tec USB-C Metal 2.5Gbps Ethernet Adapter | Stable | USB adapter needs to be plugged in the front port, both back ports are dropping connection all the time. |
| DS416play (braswell) | CLUB 3D CAC-1420 | Work | The 2nd adapter is not working |
| DS416Play (braswell) | Sabrent NT-S25G | Work | |
| DS216+ (braswell) | CLUB 3D CAC-1420 | Unstable | |
| DS2415+ (avaton) | CLUB 3D CAC-1420 | Unstable | |
| DS1815+ (avaton) | CLUB 3D CAC-1420 | Unstable | |
| DS1515+ (avaton) | UGREEN USB C to 2.5G Ethernet Adapter | Unstable | |
| DS415+ (avaton) | CableCreation 2.5G Ethernet to USB Adapter | Work | |
| DS415+ (avoton) | CLUB 3D CAC-1420 | Tbd | |
| DS415+ (avoton) | CLUB 3D CAC-1420 | Work | Using rear USB port (front 3.0 is not present on this model). |
| DS3615xs (bromolow) | Syncwire USB to Ethernet Adapter(1Gbps) | Work | Custom build for DSM 5.2 |
| DS220j (rtd1296) | ? | Unstable | |
| DS418 (rtd1296) | CLUB 3D CAC-1420 | Slow | |
| DS418j (rtd1296) | UGREEN USB C to 2.5G Ethernet Adapter | Untable | |
| DS416 (alpine4k) | ? | Work | |
| DS416 (alpine4k) | Cable Matters USB to 2.5G Ethernet Adapter | Work | Need to use front ports |
| DS416slim (armada38x) | ? | Not Work | "Cannot allocate memory" error occured since this model has only 512MB RAM |
| DS216j (armada38x) | UGREEN USB C to 2.5G Ethernet Adapter | Work | Port: USB3.0 at back |
| DS715 (alpine) | ? | Work | |
| DS414 (armadaxp) | CLUB 3D CAC-1420 | Work | |
| DS214+ (armadaxp) | ? | Slow | |
| DS214play (evansport) | UGREEN USB C to 2.5G Ethernet Adapter | Slow | |
| DS1812+ (cedarview) | Sabrent NT-S25G and more | Slow | 5 adapters are tested, but all of them are not working properly |
| DS1812+ (cedarview) | Sabrent NT-S25G | Slow | |
| DS1512+ (cedarview) | CLUB 3D CAC-1420 | Slow | |
| DS412+ (cedarview) | ASUSTOR AS-U2.5G | Slow | Worked only in the top rear USB3.0 port |
| DS412+ (cedarview) | CLUB 3D CAC-1420 | Work | |
| DS412+ (cedarview) | Plugable USBC-E2500 | Work |
| DS | | Work | |