MAINTAINERS: replace git pointer to github #9

nashif · 2017-04-28T23:49:37Z

Signed-off-by: Anas Nashif [email protected]

Signed-off-by: Anas Nashif <[email protected]>

We now use github for the SDK downloads and releases. Signed-off-by: Anas Nashif <[email protected]>

dbkinder

+1

…td-17.06 Upstream merge 21 June 2017

xtensa: fixes undefined reference to z_arch_irq_is_enabled()

This makes the gatt metrics also available for gatt write-without-rsp-cb so it now prints the rate of each write: uart:~$ gatt write-without-response-cb 1e ff 10 10 Write zephyrproject-rtos#1: 16 bytes (0 bps) Write zephyrproject-rtos#2: 32 bytes (3445948416 bps) Write zephyrproject-rtos#3: 48 bytes (2596929536 bps) Write zephyrproject-rtos#4: 64 bytes (6400 bps) Write zephyrproject-rtos#5: 80 bytes (8533 bps) Write zephyrproject-rtos#6: 96 bytes (10666 bps) Write zephyrproject-rtos#7: 112 bytes (8533 bps) Write zephyrproject-rtos#8: 128 bytes (9955 bps) Write zephyrproject-rtos#9: 144 bytes (11377 bps) Write zephyrproject-rtos#10: 160 bytes (7680 bps) Write zephyrproject-rtos#11: 176 bytes (8533 bps) Write zephyrproject-rtos#12: 192 bytes (9386 bps) Write Complete (err 0) Write zephyrproject-rtos#13: 208 bytes (8533 bps) Write zephyrproject-rtos#14: 224 bytes (9244 bps) Write zephyrproject-rtos#15: 240 bytes (9955 bps) Write zephyrproject-rtos#16: 256 bytes (8000 bps) Signed-off-by: Luiz Augusto von Dentz <[email protected]>

This makes the gatt metrics also available for gatt write-without-rsp-cb so it now prints the rate of each write: uart:~$ gatt write-without-response-cb 1e ff 10 10 Write #1: 16 bytes (0 bps) Write #2: 32 bytes (3445948416 bps) Write #3: 48 bytes (2596929536 bps) Write #4: 64 bytes (6400 bps) Write #5: 80 bytes (8533 bps) Write #6: 96 bytes (10666 bps) Write #7: 112 bytes (8533 bps) Write #8: 128 bytes (9955 bps) Write #9: 144 bytes (11377 bps) Write #10: 160 bytes (7680 bps) Write #11: 176 bytes (8533 bps) Write #12: 192 bytes (9386 bps) Write Complete (err 0) Write #13: 208 bytes (8533 bps) Write #14: 224 bytes (9244 bps) Write #15: 240 bytes (9955 bps) Write #16: 256 bytes (8000 bps) Signed-off-by: Luiz Augusto von Dentz <[email protected]>

This makes the gatt metrics also available for gatt write-without-rsp-cb so it now prints the rate of each write: uart:~$ gatt write-without-response-cb 1e ff 10 10 Write zephyrproject-rtos#1: 16 bytes (0 bps) Write zephyrproject-rtos#2: 32 bytes (3445948416 bps) Write zephyrproject-rtos#3: 48 bytes (2596929536 bps) Write zephyrproject-rtos#4: 64 bytes (6400 bps) Write zephyrproject-rtos#5: 80 bytes (8533 bps) Write zephyrproject-rtos#6: 96 bytes (10666 bps) Write zephyrproject-rtos#7: 112 bytes (8533 bps) Write zephyrproject-rtos#8: 128 bytes (9955 bps) Write zephyrproject-rtos#9: 144 bytes (11377 bps) Write zephyrproject-rtos#10: 160 bytes (7680 bps) Write zephyrproject-rtos#11: 176 bytes (8533 bps) Write zephyrproject-rtos#12: 192 bytes (9386 bps) Write Complete (err 0) Write zephyrproject-rtos#13: 208 bytes (8533 bps) Write zephyrproject-rtos#14: 224 bytes (9244 bps) Write zephyrproject-rtos#15: 240 bytes (9955 bps) Write zephyrproject-rtos#16: 256 bytes (8000 bps) Signed-off-by: Luiz Augusto von Dentz <[email protected]>

This makes the gatt metrics also available for gatt write-without-rsp-cb so it now prints the rate of each write: uart:~$ gatt write-without-response-cb 1e ff 10 10 Write #1: 16 bytes (0 bps) Write #2: 32 bytes (3445948416 bps) Write #3: 48 bytes (2596929536 bps) Write #4: 64 bytes (6400 bps) Write #5: 80 bytes (8533 bps) Write #6: 96 bytes (10666 bps) Write #7: 112 bytes (8533 bps) Write #8: 128 bytes (9955 bps) Write #9: 144 bytes (11377 bps) Write #10: 160 bytes (7680 bps) Write #11: 176 bytes (8533 bps) Write #12: 192 bytes (9386 bps) Write Complete (err 0) Write #13: 208 bytes (8533 bps) Write #14: 224 bytes (9244 bps) Write #15: 240 bytes (9955 bps) Write #16: 256 bytes (8000 bps) Signed-off-by: Luiz Augusto von Dentz <[email protected]>

…edom BeagleConnect Freedom

…am-tag-v2.7.0-dual_can Patch upstream tag v2.7.0 dual can

…reertosStaticApi_fsl_debug_console Feature/freertos static api fsl debug console

Flush all messages and invoke `abort()` when a k_panic() or k_oops() is hit in native_posix mode. One of the main purposes of `native_posix` is to provide debug convenience. When running in a debugger, `abort()` stops execution which provides a backtrace and the ability to inspect all variables. A practical use case is fuzzing failures in SOF, see an example in: thesofproject/sof#8632 In such a case, this commit adds value even before using a debugger. Without this commit, confusingly meaningless stack trace: ``` INFO: seed corpus: files: 1097 min: 1b max: 428b total: 90853b rss: 58Mb Exiting due to fatal error ==314134== ERROR: libFuzzer: fuzz target exited #0 0x81d9637 in __sanitizer_print_stack_trace (zephyr.exe+0x81d9637) #1 0x80cc42b in fuzzer::PrintStackTrace() (zephyr.exe+0x80cc42b) zephyrproject-rtos#2 0x80ab79e in fuzzer::Fuzzer::ExitCallback() FuzzerLoop.cpp.o zephyrproject-rtos#3 0x80ab864 in fuzzer::Fuzzer::StaticExitCallback() (zephyr.exe+ zephyrproject-rtos#4 0xf783dfe8 (/usr/lib32/libc.so.6+0x3dfe8) zephyrproject-rtos#5 0xf783e1e6 in exit (/usr/lib32/libc.so.6+0x3e1e6) zephyrproject-rtos#6 0x82a5488 in posix_exit boards/posix/native_posix/main.c:51:2 SUMMARY: libFuzzer: fuzz target exited ``` Thanks to this commit the `k_panic()` location is immediately available in the logs without even running anything: ``` INFO: seed corpus: files: 1097 min: 1b max: 428b total: 90853b rss: 58Mb ==315176== ERROR: libFuzzer: deadly signal LLVMSymbolizer: error reading file: No such file or directory #0 0x81d9647 in __sanitizer_print_stack_trace (zephyr.exe+0x81d9647) #1 0x80cc43b in fuzzer::PrintStackTrace() (zephyr.exe+0x80cc43b) zephyrproject-rtos#2 0x80ab6be in fuzzer::Fuzzer::CrashCallback() FuzzerLoop.cpp.o zephyrproject-rtos#3 0x80ab77b in fuzzer::Fuzzer::StaticCrashSignalCallback() zephyrproject-rtos#4 0xf7f3159f (linux-gate.so.1+0x59f) zephyrproject-rtos#5 0xf7f31578 (linux-gate.so.1+0x578) zephyrproject-rtos#6 0xf788ea16 (/usr/lib32/libc.so.6+0x8ea16) zephyrproject-rtos#7 0xf783b316 in raise (/usr/lib32/libc.so.6+0x3b316) zephyrproject-rtos#8 0xf7822120 in abort (/usr/lib32/libc.so.6+0x22120) zephyrproject-rtos#9 0x82afbde in ipc_cmd src/ipc/ipc3/handler.c:1623:2 NOTE: libFuzzer has rudimentary signal handlers. Combine libFuzzer with AddressSanitizer or similar for better crash reports. SUMMARY: libFuzzer: deadly signal ``` Full stack trace When running zephyr.exe in gdb: ``` ./scripts/fuzz.sh -- -DEXTRA_CFLAGS="-O0 -g3" gdb ./zephyr.exe backtrace zephyrproject-rtos#2 0xf783b317 in raise () from /usr/lib32/libc.so.6 zephyrproject-rtos#3 0xf7822121 in abort () from /usr/lib32/libc.so.6 zephyrproject-rtos#4 0x082afbdf in ipc_cmd (_hdr=0x8b...) at src/ipc/ipc3/handler.c:1623 zephyrproject-rtos#5 0x082fbf4b in ipc_platform_do_cmd (ipc=0x8b161c0) at src/platform/posix/ipc.c:162 zephyrproject-rtos#6 0x082e1e07 in ipc_do_cmd (data=0x8b161c0 <heapmem+1472>) at src/ipc/ipc-common.c:328 zephyrproject-rtos#7 0x083696aa in task_run (task=0x8b161e8 <heapmem+1512>) at zephyr/include/rtos/task.h:94 zephyrproject-rtos#8 0x083682dc in edf_work_handler (work=0x8b1621c <heapmem+1564>) at zephyr/edf_schedule.c:32 zephyrproject-rtos#9 0x085245af in work_queue_main (workq_ptr=0x8b15b00 <edf_workq>,...) at zephyr/kernel/work.c:688 zephyrproject-rtos#10 0x0823a6bc in z_thread_entry (entry=0x8523be0 <work_queue_main>,.. at zephyr/lib/os/thread_entry.c:48 zephyrproject-rtos#11 0x0829a6a1 in posix_arch_thread_entry (pa_thread_status=0x8630648 .. at zephyr/arch/posix/core/thread.c:56 zephyrproject-rtos#12 0x0829c043 in posix_thread_starter (arg=0x4) at zephyr/arch/posix/core/posix_core.c:293 zephyrproject-rtos#13 0x080f6041 in asan_thread_start(void*) () zephyrproject-rtos#14 0xf788c73c in ?? () from /usr/lib32/libc.so.6 ``` Signed-off-by: Marc Herbert <[email protected]>

Flush all messages and invoke `abort()` when a k_panic() or k_oops() is hit in native_posix mode. One of the main purposes of `native_posix` is to provide debug convenience. When running in a debugger, `abort()` stops execution which provides a backtrace and the ability to inspect all variables. A good, sample use case is fuzzing failures in SOF, see an example in: thesofproject/sof#8632 In such a case, this commit adds value even before using a debugger. Without this commit, confusingly meaningless stack trace: ``` INFO: seed corpus: files: 1097 min: 1b max: 428b total: 90853b rss: 58Mb Exiting due to fatal error ==314134== ERROR: libFuzzer: fuzz target exited #0 0x81d9637 in __sanitizer_print_stack_trace (zephyr.exe+0x81d9637) #1 0x80cc42b in fuzzer::PrintStackTrace() (zephyr.exe+0x80cc42b) zephyrproject-rtos#2 0x80ab79e in fuzzer::Fuzzer::ExitCallback() FuzzerLoop.cpp.o zephyrproject-rtos#3 0x80ab864 in fuzzer::Fuzzer::StaticExitCallback() (zephyr.exe+ zephyrproject-rtos#4 0xf783dfe8 (/usr/lib32/libc.so.6+0x3dfe8) zephyrproject-rtos#5 0xf783e1e6 in exit (/usr/lib32/libc.so.6+0x3e1e6) zephyrproject-rtos#6 0x82a5488 in posix_exit boards/posix/native_posix/main.c:51:2 SUMMARY: libFuzzer: fuzz target exited ``` Thanks to this commit the `k_panic()` location is now immediately available in test logs without even running anything locally: ``` INFO: seed corpus: files: 1097 min: 1b max: 428b total: 90853b rss: 58Mb @ WEST_TOPDIR/sof/src/ipc/ipc3/handler.c:1623 ZEPHYR FATAL ERROR: 3 ==315176== ERROR: libFuzzer: deadly signal LLVMSymbolizer: error reading file: No such file or directory #0 0x81d9647 in __sanitizer_print_stack_trace (zephyr.exe+0x81d9647) #1 0x80cc43b in fuzzer::PrintStackTrace() (zephyr.exe+0x80cc43b) zephyrproject-rtos#2 0x80ab6be in fuzzer::Fuzzer::CrashCallback() FuzzerLoop.cpp.o zephyrproject-rtos#3 0x80ab77b in fuzzer::Fuzzer::StaticCrashSignalCallback() zephyrproject-rtos#4 0xf7f3159f (linux-gate.so.1+0x59f) zephyrproject-rtos#5 0xf7f31578 (linux-gate.so.1+0x578) zephyrproject-rtos#6 0xf788ea16 (/usr/lib32/libc.so.6+0x8ea16) zephyrproject-rtos#7 0xf783b316 in raise (/usr/lib32/libc.so.6+0x3b316) zephyrproject-rtos#8 0xf7822120 in abort (/usr/lib32/libc.so.6+0x22120) zephyrproject-rtos#9 0x82afbde in ipc_cmd src/ipc/ipc3/handler.c:1623:2 NOTE: libFuzzer has rudimentary signal handlers. Combine libFuzzer with AddressSanitizer or similar for better crash reports. SUMMARY: libFuzzer: deadly signal ``` The full stack trace is now immediately available when running zephyr.exe in gdb: ``` ./scripts/fuzz.sh -- -DEXTRA_CFLAGS="-O0 -g3" gdb build-fuzz/zephyr/zephyr.exe run backtrace zephyrproject-rtos#2 0xf783b317 in raise () from /usr/lib32/libc.so.6 zephyrproject-rtos#3 0xf7822121 in abort () from /usr/lib32/libc.so.6 zephyrproject-rtos#4 0x082afbdf in ipc_cmd (_hdr=0x8b...) at src/ipc/ipc3/handler.c:1623 zephyrproject-rtos#5 0x082fbf4b in ipc_platform_do_cmd (ipc=0x8b161c0) at src/platform/posix/ipc.c:162 zephyrproject-rtos#6 0x082e1e07 in ipc_do_cmd (data=0x8b161c0 <heapmem+1472>) at src/ipc/ipc-common.c:328 zephyrproject-rtos#7 0x083696aa in task_run (task=0x8b161e8 <heapmem+1512>) at zephyr/include/rtos/task.h:94 zephyrproject-rtos#8 0x083682dc in edf_work_handler (work=0x8b1621c <heapmem+1564>) at zephyr/edf_schedule.c:32 zephyrproject-rtos#9 0x085245af in work_queue_main (workq_ptr=0x8b15b00 <edf_workq>,...) at zephyr/kernel/work.c:688 zephyrproject-rtos#10 0x0823a6bc in z_thread_entry (entry=0x8523be0 <work_queue_main>,.. at zephyr/lib/os/thread_entry.c:48 zephyrproject-rtos#11 0x0829a6a1 in posix_arch_thread_entry (pa_thread_status=0x8630648 .. at zephyr/arch/posix/core/thread.c:56 zephyrproject-rtos#12 0x0829c043 in posix_thread_starter (arg=0x4) at zephyr/arch/posix/core/posix_core.c:293 zephyrproject-rtos#13 0x080f6041 in asan_thread_start(void*) () zephyrproject-rtos#14 0xf788c73c in ?? () from /usr/lib32/libc.so.6 ``` Signed-off-by: Marc Herbert <[email protected]>

D9/SCK pin is zephyrproject-rtos#9 pin, not #0. Signed-off-by: TOKITA Hiroshi <[email protected]>

…zephyr.multislave i2c multi slave support for npcx

…sses (zephyrproject-rtos#9) * actions: adding trivy-cve-scan * workflows: adding fmos-ci-self-test.yml

…sleep drivers: modem: wake modem with dtr without reset

ZEPHYR: fix some compile warnings. Approved-by: Chris Desjardins

Release 24.09.0

nashif added the In progress For PRs: is work in progress and should not be merged yet. For issues: Is being worked on label Apr 28, 2017

nashif requested review from galak and dbkinder April 29, 2017 00:09

nashif added 2 commits April 29, 2017 12:20

MAINTAINERS: replace git pointer to github

8820199

Signed-off-by: Anas Nashif <[email protected]>

doc: change pointer to SDK

0201fca

We now use github for the SDK downloads and releases. Signed-off-by: Anas Nashif <[email protected]>

nashif force-pushed the maintainers_gerrit branch from 0c1d5ef to 0201fca Compare April 29, 2017 16:20

dbkinder approved these changes Apr 30, 2017

View reviewed changes

nashif merged commit e588ca0 into zephyrproject-rtos:master May 1, 2017

nashif removed the In progress For PRs: is work in progress and should not be merged yet. For issues: Is being worked on label May 1, 2017

rsalveti added a commit to rsalveti/zephyr that referenced this pull request Jun 29, 2017

[LTD mergeup] Merge pull request zephyrproject-rtos#9 from mbolivar/l…

79f53d0

…td-17.06 Upstream merge 21 June 2017

magilus mentioned this pull request Feb 3, 2019

Dead loop of the kernel during Bluetooth Mesh pressure communication #12726

Closed

This was referenced Jun 13, 2019

kernel timeout_list repeatedly add a thread #16793

Closed

Bluetooth: Mesh: Rx buffer exhaustion causes deadlock #16864

Closed

xiaoliang314 mentioned this pull request Jun 26, 2019

Bluetooth: Fix various deadlock issues when running low on buffers #16870

Closed

dcpleung pushed a commit to dcpleung/zephyr that referenced this pull request Aug 26, 2019

Merge pull request zephyrproject-rtos#9 from dcpleung/sof/fix_assert

a3b8bc0

xtensa: fixes undefined reference to z_arch_irq_is_enabled()

theBASTI0N mentioned this pull request Jan 30, 2020

LIS2DH SPI Support #22348

Closed

scottwcpg mentioned this pull request Apr 9, 2020

Build error when using MCHP ACPI HAL macros #24241

Closed

zephyrbot mentioned this pull request Apr 22, 2020

net: socket: syscall for socketpair(2) #24367

Closed

anchao mentioned this pull request Jul 30, 2020

Bluetooth: Mesh: Fix tx seg buffer with NULL pointer reference #27251

Merged

MulinChao mentioned this pull request Aug 26, 2020

drivers: gpio: miwu: Add miwu and gpio drivers in npcx7 series. #27578

Merged

jadonk added a commit to jadonk/zephyr-1 that referenced this pull request Sep 21, 2021

Merge pull request zephyrproject-rtos#9 from Yadnik1/BeagleConnectFre…

106773f

…edom BeagleConnect Freedom

pllee4 pushed a commit to pllee4/zephyr that referenced this pull request Jan 9, 2022

Merge pull request zephyrproject-rtos#9 from westonrobot/patch-upstre…

6f989fe

…am-tag-v2.7.0-dual_can Patch upstream tag v2.7.0 dual can

de-nordic mentioned this pull request Jan 10, 2022

fat_fs: Add support for the "win" variable alignment in FATFS struct #41096

Merged

RafaelLeeImg mentioned this pull request Jan 19, 2022

Kernel usage fault when using semaphore with multi-threading #41963

Closed

piotrParf mentioned this pull request Feb 9, 2022

BLE Testing functions do not work properly #42534

Closed

henrikbrixandersen pushed a commit to vestas-wind-systems/zephyr that referenced this pull request Jan 5, 2023

Merge pull request zephyrproject-rtos#9 from ACRIOS-Systems/feature/f…

66fdc6f

…reertosStaticApi_fsl_debug_console Feature/freertos static api fsl debug console

sjanc mentioned this pull request May 16, 2023

Assert when executing GATT/SR/GAW/BV-14-C test #57930

Closed

pkunieck pushed a commit to pkunieck/zephyr that referenced this pull request Jul 18, 2023

SDK 0.13.2, remove ALT_SDK (zephyrproject-rtos#9)

d313b3e

talih0 mentioned this pull request Dec 13, 2023

subsys: shell_telent: don't close connection on EAGAIN #66287

Merged

soburi added a commit to soburi/zephyr that referenced this pull request Mar 11, 2024

dts: bindings: gpio: arduino-mkr-header: Correct wrong D9/SCK pin number

d1e2bd2

D9/SCK pin is zephyrproject-rtos#9 pin, not #0. Signed-off-by: TOKITA Hiroshi <[email protected]>

soburi mentioned this pull request Mar 11, 2024

dts: bindings: gpio: arduino-mkr-header: Correct wrong D9/SCK pin number #70059

Merged

mjchen0 pushed a commit to mjchen0/zephyr that referenced this pull request Mar 13, 2024

dts: bindings: gpio: arduino-mkr-header: Correct wrong D9/SCK pin number

ba46cd0

D9/SCK pin is zephyrproject-rtos#9 pin, not #0. Signed-off-by: TOKITA Hiroshi <[email protected]>

ashiroji pushed a commit to ashiroji/zephyr that referenced this pull request Mar 19, 2024

dts: bindings: gpio: arduino-mkr-header: Correct wrong D9/SCK pin number

244d908

D9/SCK pin is zephyrproject-rtos#9 pin, not #0. Signed-off-by: TOKITA Hiroshi <[email protected]>

kiram9 added a commit to FrameworkComputer/zephyr that referenced this pull request Apr 22, 2024

Merge pull request zephyrproject-rtos#9 from FrameworkComputer/lotus-…

65ae0b1

…zephyr.multislave i2c multi slave support for npcx

LukaszMrugala pushed a commit to LukaszMrugala/zephyr that referenced this pull request Jul 3, 2024

Adding reusable workflows and actions for use across FMOS build proce…

2723c23

…sses (zephyrproject-rtos#9) * actions: adding trivy-cve-scan * workflows: adding fmos-ci-self-test.yml

ldenefle pushed a commit to ldenefle/zephyr that referenced this pull request Aug 2, 2024

Merge pull request zephyrproject-rtos#9 from converge-io/david/modem_…

2da8e11

…sleep drivers: modem: wake modem with dtr without reset

cdesjardins pushed a commit to Arch-Embedded/zephyr that referenced this pull request Oct 22, 2024

Merged in feature/fixCompileWarnings (pull request zephyrproject-rtos#9)

ac6f402

ZEPHYR: fix some compile warnings. Approved-by: Chris Desjardins

ceolin pushed a commit to ceolin/zephyr that referenced this pull request Oct 24, 2024

Merge pull request zephyrproject-rtos#9 from Atmosic/rc_24.09.0

350d6ed

Release 24.09.0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

MAINTAINERS: replace git pointer to github #9

MAINTAINERS: replace git pointer to github #9

nashif commented Apr 28, 2017 •

edited

Loading

dbkinder left a comment

MAINTAINERS: replace git pointer to github #9

MAINTAINERS: replace git pointer to github #9

Conversation

nashif commented Apr 28, 2017 • edited Loading

dbkinder left a comment

Choose a reason for hiding this comment

nashif commented Apr 28, 2017 •

edited

Loading