Building The AL Frame

Step-0 (Adding Bottom Brackets)

Instructions

For this step you will need the following parts:

Part Name	How Many
Base Plate	1
Bottom Profiles	2
Bottom C Bracket	4
M4x8 Screw	12
M6x12 or M6x14	8

The step is shown below:

Fig 1. Step-1

Attention : The relative position of bottom profiles and C brackets are important. And important distances are shown below

Fig 2. Important Distances

Step-1 (Putting AL frame together)

Instructions

For this step you will need the following parts:

Part Name	How Many
Back Vertical Profile	2
Middle Vertical Profile	2
Front Vertical Profile	2
Top Profiles	2
Front Top Profile	1
Front Bottom Profile	1
Corner Piece	16
M8x16 Screw	32
Square Washer	32

Before watching the step-2 a quick demonstration of how to put a corner piece together(You will need to do this 16 times) is shown below:

Fig 3. Corner Piece Example

Also, special attention has to be given to the position of the Front Top Profile. The position is shown in the figure below.

Fig 4. Position of Front Top Profile

Fig 4.1 Rule for Position of Front Top Profile

Also, the position of vertical profiles matters:

Fig 5. Step-2

Fig 5.1 Step-2

The whole step is shown below:

Fig 6. Step-1

Step-2 (Adding Front Stoppers)

Instructions

For this step you will need the following parts:

Part Name	How Many
Front Aligner	2
M6x12 or M6x14	4

The step is shown below:

Fig 6. Step-2

Step-3 (Adding Drawer Bottom Brackets)

Instructions

For this step you will need the following parts:

Part Name	How Many
Drawer Back Bracket	1
Drawer Front Bottom Bracket	1
M6x12 or M6x14	4

Fig 7. Step-3