openssh lacks GSSAPI support #182

jeffpc · 2014-03-10T23:31:57Z

openssh-6.2.1nb2 doesn't appear to be built in a way that supports GSSAPI authentication (in my case, for krb5).

/home/jeffpc/.ssh/config line 107: Unsupported option "GSSAPIAuthentication"
/home/jeffpc/.ssh/config line 108: Unsupported option "GSSAPIDelegateCredentials"

The text was updated successfully, but these errors were encountered:

## 1.3.7 (2013-04-09) * Erubis: Check for the correct constant (#183, mattwildig) * Don't fail when BasicObject is defined in 1.8 (#182, technobrat, judofyr)

@kevinkehl

v0.22.0 - Add new composite API to resolve ambiguity between unpacking a composite and packing a composite with one element (issue #196, courtesy @kevinkehl) - Breaking change: schema change methods no longer catch exceptions internally. They work the same as everything else. v0.21.0 - Add 1.2 libs to gem v0.19.0 - Fixed windows build by disabling native extensions (issue #188, courtesy @jacek99) - Speed improvement to native composite column extension (issue #186, courtesy @muirmanders) - Fix OrderedHash iterator return values (issue #185, courtesy @fester) - Native support for dynamic composite decoding (issue #184, courtesy @muirmanders) v0.18.0 - Cassandra 1.2 support (issue #175, courtesy @brainopia) - drop_keyspace defaults to current keyspace (issue #176, courtesy @brianopia) - Easier flush_batch interface (issue #182, courtesy @brianopia) - Support for removing multiple columns (issue #183, courtesy @brianopia)

…ult, 52, doesn't work. Needs -lreadline and something else. Will look into this later. From ChangeLog: Engine changes -------------- * Add a very short sample quest with free graphics and musics (#232, #318). * Allow scripted dialog boxes (#184). * Allow a scripted game-over menu (#261). * Replace the old built-in dialog box by a very minimal one. * Remove the old built-in game-over menu. * Remove the old built-in dark rooms displaying (#205). * New entity: separators to visually separate some regions in a map (#177). * New type of ground: ice (#182). * New type of ground: low walls (#117). * Blocks and thrown items can now fall into holes, lava and water (#191). * Kill enemies that fall into holes, lava and water (#190). * Allow quest makers and users to set the size of the playing area. * Allow maps to have a default destination entity (#231). * A game can now start without specifying an initial map and destination. * Stairs inside a single floor can now go from any layer to a next one (#178). * Fix map menus not receiving on_command_pressed/released() events. * Fix camera callbacks never called when already on the target (#308). * Fix a crash when adding a new menu during a menu:on_finished() event. * Fix a crash when calling hero:start_victory() without sword. * Fix an error when loading sounds (#236). Sounds were working anyway. * Fix a possible memory error when playing sounds. * Fix blocks that continue to follow the hero after picking a treasure (#284). * Fix on_obtained() that was not called for non-brandished treasures (#295). * Jumpers can no longer be activated the opposite way when in water. * Jumpers are now activated after a slight delay (#253). * Sensors no longer automatically reset the hero's movement (#292). * Correctly detect the ground below the hero or any point. * Don't die if there is a syntax error in dialogs.dat. * Show a better error message if trying to play a Solarus 0.9 quest (#260). * Remove built-in debug keys. This can be done from Lua now. * Remove the preprocessor constant SOLARUS_DEBUG_KEYS. * Call on_draw() before drawing menus. * Fix .it musics looping when they should not. * Log all errors in error.txt (#287). * The quest archive can now also be named data.solarus.zip (#293). Data files format changes ------------------------- You can use the script tools/data_files_conversion/1.0_to_1.1/update_quest.lua to automatically update your data files. Don't forget to make a backup first. * Sprites: New syntax easier to read and parse (#168). * project_db.dat: New syntax easier to read and parse (#169). * quest.dat: Allow to specify a range of supported quest sizes. * Maps: Add the property "default" to destinations. * Maps: Make optional the property "destination" of teletransporters. * Tilesets: The ground value of diagonal walls with water has changed. * Tilesets: New ground values "ice" and "low_wall". * dialogs.dat: Allow any property in dialogs. dialog_id and text are mandatory. * languages.dat no longer exists. Languages are in project_db.dat now (#265). Lua API changes --------------- Changes that introduce incompatibilities: * map:is_dialog_enabled() is replaced by game:is_dialog_enabled(). * map:start_dialog() is replaced by game:start_dialog(). * Remove map:draw_dialog_box(), no longer needed. * Remove map:set_dialog_style(): replace it in your own dialog box system. * Remove map:set_dialog_position(): replace it in your own dialog box system. * Remove map:set_dialog_variable(): use the info param of game:start_dialog(). * Make map:get_entities() returns an iterator instead of an array (#249). * Replace map:set_pause_enabled() by game:set_pause_allowed(). * Make the enemy:create_enemy() more like map:create_enemy() (#215). * Remove sol.language.get_default_language(), useless and misleading (#265). * Remove sol.main.is_debug_enabled(). * Remove map:get_light() and map:set_light() (#205). * In game:get/set_ability(), ability "get_back_from_death" no longer exists. * Empty chests no longer show a dialog if there is no on:empty() event (#274). Changes that do not introduce incompatibilities: * game:get/set_starting_location(): map and destination can now be nil. * hero:teleport(): make destination optional (maps now have a default one). * map:create_teletransporter(): make destination optional. * Add a function sol.video.get_quest_size(). * Make map:get_camera_position() also return the size of the visible area. * Add a method entity:is_in_same_region(entity). * Add a method entity:get_center_position(). * Add methods entity:get_direction4_to(), entity:get_direction8_to() (#150). * Add a method game:get_hero(). * Add methods hero:get/set_walking_speed() (#206). * Add hero:get_state() and hero:on_state_changed() (#207). * Add events separator:on_activating() and separator:on_activated() (#272). * Add methods enemy:is/set_traversable() (#147). * Add a method enemy:immobilize() (#160). * Add on_position_changed() to all entities, not only enemies (#298). * Add on_obstacle_reached() to all entities, not only enemies (#298). * Add on_movement_changed() to all entities, not only enemies (#298). * Add on_movement_finished() to all entities, not only enemies/NPCs (#298). * target_movement:set_target(entity) now accepts an x,y offset (#154). * Add a method game:is_pause_allowed(). * Add a method map:get_ground() (#141). * Add a method map:get_music() (#306). * Add an optional parameter on_top to sol.menu.start. * Add sprite:on_animation_changed() and sprite:on_direction_changed() (#153). * Add a function sol.input.is_key_pressed(). * Add a function sol.input.is_joypad_button_pressed(). * Add a function sol.input.get_joypad_axis_state(). * Add a function sol.input.get_joypad_hat_direction(). * Add functions sol.input.is/set_joypad_enabled() (#175). * Add a function sol.audio.get_music() (#146). * Add a function sol.audio.get_music_format(). * Add a function sol.audio.get_music_num_channels(). * Add functions sol.audio.get/set_music_channel_volume() for .it files (#250). * Add functions sol.audio.get/set_music_tempo() for .it files (#250). * Return nil if the string is not found in sol.language.get_string(). * sol.language.get_dialog() is now implemented. * Add a function game:stop_dialog(status) to close the scripted dialog box. * Add an event game:on_dialog_started(dialog, info). * Add an event game:on_dialog_finished(dialog). * Add functions game:start_game_over() and game:stop_game_over (#261). * Add events game:on_game_over_started(), game:on_game_over_finished (#261). * Add sol.file functions: open(), exists(), remove(), mkdir() (#267). Solarus Quest Editor changes ---------------------------- * Add a GUI to upgrade automatically quest files to the latest format (#247). * Remove the initial prompt dialog to open a quest (#264). * Replace non-free images by new icons (#245). * Add tooltips to the add entity toolbar. * Simplify the add entity toolbar by showing only one icon per entity type. * Survive when images cannot be found (#256). * Create more content when creating a new quest (#258, #279). * Improve error messages. * Fix a crash when creating a destructible without tileset selected (#283). * Fix the sprite field disabled in the NPC properties dialog (#303).

NOTE: During the development cycle for this release, SourceForge changed their bug numbering system. Bug numbers are recorded here as they were generated by the current system at the time they were filed. The older ones (prefixed "SF") have since been renumbered or may no longer be in the system. Feature request #169: Discontinue libxml2 support in the reputation code. Feature request #174: Drop internal libstrl implementation. Feature request #175: Discontinue support for libdkimrep. Feature request #176: Update to the final REPUTE RFCs. Activate _FFR_REDIRECT. Fix bug #178: Add support for "dmarc" as an authentication method (though it hasn't been formally registered yet) and fix a minor Authentication-Results parsing problem. Fix bug #179: Correct handling of SignatureTTL. Fix bug #180: Drain results object when doing a DB walk of a postgresql table. Fix bug #182: Add an Authentication-Results header field even for messages with no valid From: field or a fatal structural violation. Teach dkimf_db_walk() about LDAP soft starting, and don't escape the forced "*" when walking. Also handle incorrect attribute counts without causing an assertion failure. Call dkimf_config_free() on shutdown so that all DBs get properly closed and everything gets deallocated. LIBOPENDKIM: Fix bug #168: Report an unresolved CNAME for ADSP records as simply absent. LIBOPENDKIM: Add DKIM_LIBFLAGS_REQUESTREPORTS to request that an "r=y" tag be added to signatures, per RFC6651. TOOLS: Fix boundary condition in opendkim-testmsg. DOCS: Feature request #168: Improve documentation of signature verification failure debugging features. DOCS: Feature request #172: Describe socket selection procedure in detail, and mention selinux command to get set up.

## 1.3.7 (2013-04-09) * Erubis: Check for the correct constant (TritonDataCenter#183, mattwildig) * Don't fail when BasicObject is defined in 1.8 (TritonDataCenter#182, technobrat, judofyr)

@kevinkehl

v0.22.0 - Add new composite API to resolve ambiguity between unpacking a composite and packing a composite with one element (issue TritonDataCenter#196, courtesy @kevinkehl) - Breaking change: schema change methods no longer catch exceptions internally. They work the same as everything else. v0.21.0 - Add 1.2 libs to gem v0.19.0 - Fixed windows build by disabling native extensions (issue TritonDataCenter#188, courtesy @jacek99) - Speed improvement to native composite column extension (issue TritonDataCenter#186, courtesy @muirmanders) - Fix OrderedHash iterator return values (issue TritonDataCenter#185, courtesy @fester) - Native support for dynamic composite decoding (issue TritonDataCenter#184, courtesy @muirmanders) v0.18.0 - Cassandra 1.2 support (issue TritonDataCenter#175, courtesy @brainopia) - drop_keyspace defaults to current keyspace (issue TritonDataCenter#176, courtesy @brianopia) - Easier flush_batch interface (issue TritonDataCenter#182, courtesy @brianopia) - Support for removing multiple columns (issue TritonDataCenter#183, courtesy @brianopia)

…ult, 52, doesn't work. Needs -lreadline and something else. Will look into this later. From ChangeLog: Engine changes -------------- * Add a very short sample quest with free graphics and musics (TritonDataCenter#232, TritonDataCenter#318). * Allow scripted dialog boxes (TritonDataCenter#184). * Allow a scripted game-over menu (TritonDataCenter#261). * Replace the old built-in dialog box by a very minimal one. * Remove the old built-in game-over menu. * Remove the old built-in dark rooms displaying (TritonDataCenter#205). * New entity: separators to visually separate some regions in a map (TritonDataCenter#177). * New type of ground: ice (TritonDataCenter#182). * New type of ground: low walls (TritonDataCenter#117). * Blocks and thrown items can now fall into holes, lava and water (TritonDataCenter#191). * Kill enemies that fall into holes, lava and water (TritonDataCenter#190). * Allow quest makers and users to set the size of the playing area. * Allow maps to have a default destination entity (TritonDataCenter#231). * A game can now start without specifying an initial map and destination. * Stairs inside a single floor can now go from any layer to a next one (TritonDataCenter#178). * Fix map menus not receiving on_command_pressed/released() events. * Fix camera callbacks never called when already on the target (TritonDataCenter#308). * Fix a crash when adding a new menu during a menu:on_finished() event. * Fix a crash when calling hero:start_victory() without sword. * Fix an error when loading sounds (TritonDataCenter#236). Sounds were working anyway. * Fix a possible memory error when playing sounds. * Fix blocks that continue to follow the hero after picking a treasure (TritonDataCenter#284). * Fix on_obtained() that was not called for non-brandished treasures (TritonDataCenter#295). * Jumpers can no longer be activated the opposite way when in water. * Jumpers are now activated after a slight delay (TritonDataCenter#253). * Sensors no longer automatically reset the hero's movement (TritonDataCenter#292). * Correctly detect the ground below the hero or any point. * Don't die if there is a syntax error in dialogs.dat. * Show a better error message if trying to play a Solarus 0.9 quest (TritonDataCenter#260). * Remove built-in debug keys. This can be done from Lua now. * Remove the preprocessor constant SOLARUS_DEBUG_KEYS. * Call on_draw() before drawing menus. * Fix .it musics looping when they should not. * Log all errors in error.txt (TritonDataCenter#287). * The quest archive can now also be named data.solarus.zip (TritonDataCenter#293). Data files format changes ------------------------- You can use the script tools/data_files_conversion/1.0_to_1.1/update_quest.lua to automatically update your data files. Don't forget to make a backup first. * Sprites: New syntax easier to read and parse (TritonDataCenter#168). * project_db.dat: New syntax easier to read and parse (TritonDataCenter#169). * quest.dat: Allow to specify a range of supported quest sizes. * Maps: Add the property "default" to destinations. * Maps: Make optional the property "destination" of teletransporters. * Tilesets: The ground value of diagonal walls with water has changed. * Tilesets: New ground values "ice" and "low_wall". * dialogs.dat: Allow any property in dialogs. dialog_id and text are mandatory. * languages.dat no longer exists. Languages are in project_db.dat now (TritonDataCenter#265). Lua API changes --------------- Changes that introduce incompatibilities: * map:is_dialog_enabled() is replaced by game:is_dialog_enabled(). * map:start_dialog() is replaced by game:start_dialog(). * Remove map:draw_dialog_box(), no longer needed. * Remove map:set_dialog_style(): replace it in your own dialog box system. * Remove map:set_dialog_position(): replace it in your own dialog box system. * Remove map:set_dialog_variable(): use the info param of game:start_dialog(). * Make map:get_entities() returns an iterator instead of an array (TritonDataCenter#249). * Replace map:set_pause_enabled() by game:set_pause_allowed(). * Make the enemy:create_enemy() more like map:create_enemy() (TritonDataCenter#215). * Remove sol.language.get_default_language(), useless and misleading (TritonDataCenter#265). * Remove sol.main.is_debug_enabled(). * Remove map:get_light() and map:set_light() (TritonDataCenter#205). * In game:get/set_ability(), ability "get_back_from_death" no longer exists. * Empty chests no longer show a dialog if there is no on:empty() event (TritonDataCenter#274). Changes that do not introduce incompatibilities: * game:get/set_starting_location(): map and destination can now be nil. * hero:teleport(): make destination optional (maps now have a default one). * map:create_teletransporter(): make destination optional. * Add a function sol.video.get_quest_size(). * Make map:get_camera_position() also return the size of the visible area. * Add a method entity:is_in_same_region(entity). * Add a method entity:get_center_position(). * Add methods entity:get_direction4_to(), entity:get_direction8_to() (TritonDataCenter#150). * Add a method game:get_hero(). * Add methods hero:get/set_walking_speed() (TritonDataCenter#206). * Add hero:get_state() and hero:on_state_changed() (TritonDataCenter#207). * Add events separator:on_activating() and separator:on_activated() (TritonDataCenter#272). * Add methods enemy:is/set_traversable() (TritonDataCenter#147). * Add a method enemy:immobilize() (TritonDataCenter#160). * Add on_position_changed() to all entities, not only enemies (TritonDataCenter#298). * Add on_obstacle_reached() to all entities, not only enemies (TritonDataCenter#298). * Add on_movement_changed() to all entities, not only enemies (TritonDataCenter#298). * Add on_movement_finished() to all entities, not only enemies/NPCs (TritonDataCenter#298). * target_movement:set_target(entity) now accepts an x,y offset (TritonDataCenter#154). * Add a method game:is_pause_allowed(). * Add a method map:get_ground() (TritonDataCenter#141). * Add a method map:get_music() (TritonDataCenter#306). * Add an optional parameter on_top to sol.menu.start. * Add sprite:on_animation_changed() and sprite:on_direction_changed() (TritonDataCenter#153). * Add a function sol.input.is_key_pressed(). * Add a function sol.input.is_joypad_button_pressed(). * Add a function sol.input.get_joypad_axis_state(). * Add a function sol.input.get_joypad_hat_direction(). * Add functions sol.input.is/set_joypad_enabled() (TritonDataCenter#175). * Add a function sol.audio.get_music() (TritonDataCenter#146). * Add a function sol.audio.get_music_format(). * Add a function sol.audio.get_music_num_channels(). * Add functions sol.audio.get/set_music_channel_volume() for .it files (TritonDataCenter#250). * Add functions sol.audio.get/set_music_tempo() for .it files (TritonDataCenter#250). * Return nil if the string is not found in sol.language.get_string(). * sol.language.get_dialog() is now implemented. * Add a function game:stop_dialog(status) to close the scripted dialog box. * Add an event game:on_dialog_started(dialog, info). * Add an event game:on_dialog_finished(dialog). * Add functions game:start_game_over() and game:stop_game_over (TritonDataCenter#261). * Add events game:on_game_over_started(), game:on_game_over_finished (TritonDataCenter#261). * Add sol.file functions: open(), exists(), remove(), mkdir() (TritonDataCenter#267). Solarus Quest Editor changes ---------------------------- * Add a GUI to upgrade automatically quest files to the latest format (TritonDataCenter#247). * Remove the initial prompt dialog to open a quest (TritonDataCenter#264). * Replace non-free images by new icons (TritonDataCenter#245). * Add tooltips to the add entity toolbar. * Simplify the add entity toolbar by showing only one icon per entity type. * Survive when images cannot be found (TritonDataCenter#256). * Create more content when creating a new quest (TritonDataCenter#258, TritonDataCenter#279). * Improve error messages. * Fix a crash when creating a destructible without tileset selected (TritonDataCenter#283). * Fix the sprite field disabled in the NPC properties dialog (TritonDataCenter#303).

NOTE: During the development cycle for this release, SourceForge changed their bug numbering system. Bug numbers are recorded here as they were generated by the current system at the time they were filed. The older ones (prefixed "SF") have since been renumbered or may no longer be in the system. Feature request TritonDataCenter#169: Discontinue libxml2 support in the reputation code. Feature request TritonDataCenter#174: Drop internal libstrl implementation. Feature request TritonDataCenter#175: Discontinue support for libdkimrep. Feature request TritonDataCenter#176: Update to the final REPUTE RFCs. Activate _FFR_REDIRECT. Fix bug TritonDataCenter#178: Add support for "dmarc" as an authentication method (though it hasn't been formally registered yet) and fix a minor Authentication-Results parsing problem. Fix bug TritonDataCenter#179: Correct handling of SignatureTTL. Fix bug TritonDataCenter#180: Drain results object when doing a DB walk of a postgresql table. Fix bug TritonDataCenter#182: Add an Authentication-Results header field even for messages with no valid From: field or a fatal structural violation. Teach dkimf_db_walk() about LDAP soft starting, and don't escape the forced "*" when walking. Also handle incorrect attribute counts without causing an assertion failure. Call dkimf_config_free() on shutdown so that all DBs get properly closed and everything gets deallocated. LIBOPENDKIM: Fix bug TritonDataCenter#168: Report an unresolved CNAME for ADSP records as simply absent. LIBOPENDKIM: Add DKIM_LIBFLAGS_REQUESTREPORTS to request that an "r=y" tag be added to signatures, per RFC6651. TOOLS: Fix boundary condition in opendkim-testmsg. DOCS: Feature request TritonDataCenter#168: Improve documentation of signature verification failure debugging features. DOCS: Feature request TritonDataCenter#172: Describe socket selection procedure in detail, and mention selinux command to get set up.

Add test Upstream changes: 1.5.6 (2014-04-14) Bug fixes: Check the last line even if it has no end-of-line. (Issue #273) 1.5.5 (2014-04-10) Bug fixes: Fix regression with E22 checks and inline comments. (Issue #271) 1.5.4 (2014-04-07) Bug fixes: Fix negative offset with E303 before a multi-line docstring. (Issue #269) 1.5.3 (2014-04-04) Bug fixes: Fix wrong offset computation when error is on the last char of a physical line. (Issue #268) 1.5.2 (2014-04-04) Changes: Distribute a universal wheel file. Bug fixes: Report correct line number for E303 with comments. (Issue #60) Do not allow newline after parameter equal. (Issue #252) Fix line number reported for multi-line strings. (Issue #220) Fix false positive E121/E126 with multi-line strings. (Issue #265) Fix E501 not detected in comments with Python 2.5. Fix caret position with --show-source when line contains tabs. 1.5.1 (2014-03-27) Bug fixes: Fix a crash with E125 on multi-line strings. (Issue #263) 1.5 (2014-03-26) Changes: Report E129 instead of E125 for visually indented line with same indent as next logical line. (Issue #126) Report E265 for space before block comment. (Issue #190) Report E713 and E714 when operators not in and is not are recommended. (Issue #236) Allow long lines in multiline strings and comments if they cannot be wrapped. (Issue #224). Optionally disable physical line checks inside multiline strings, using # noqa. (Issue #242) Change text for E121 to report "continuation line under-indented for hanging indent" instead of indentation not being a multiple of 4. Report E131 instead of E121 / E126 if the hanging indent is not consistent within the same continuation block. It helps when error E121 or E126 is in the ignore list. Report E126 instead of E121 when the continuation line is hanging with extra indentation, even if indentation is not a multiple of 4. Bug fixes: Allow the checkers to report errors on empty files. (Issue #240) Fix ignoring too many checks when --select is used with codes declared in a flake8 extension. (Issue #216) Fix regression with multiple brackets. (Issue #214) Fix StyleGuide to parse the local configuration if the keyword argument paths is specified. (Issue #246) Fix a false positive E124 for hanging indent. (Issue #254) Fix a false positive E126 with embedded colon. (Issue #144) Fix a false positive E126 when indenting with tabs. (Issue #204) Fix behaviour when exclude is in the configuration file and the current directory is not the project directory. (Issue #247) The logical checks can return None instead of an empty iterator. (Issue #250) Do not report multiple E101 if only the first indentation starts with a tab. (Issue #237) Fix a rare false positive W602. (Issue #34) 1.4.6 (2013-07-02) Changes: Honor # noqa for errors E711 and E712. (Issue #180) When both a tox.ini and a setup.cfg are present in the project directory, merge their contents. The tox.ini file takes precedence (same as before). (Issue #182) Give priority to --select over --ignore. (Issue #188) Compare full path when excluding a file. (Issue #186) New option --hang-closing to switch to the alternative style of closing bracket indentation for hanging indent. Add error E133 for closing bracket which is missing indentation. (Issue #103) Accept both styles of closing bracket indentation for hanging indent. Do not report error E123 in the default configuration. (Issue #103) Bug fixes: Do not crash when running AST checks and the document contains null bytes. (Issue #184) Correctly report other E12 errors when E123 is ignored. (Issue #103) Fix false positive E261/E262 when the file contains a BOM. (Issue #193) Fix E701, E702 and E703 not detected sometimes. (Issue #196) Fix E122 not detected in some cases. (Issue #201 and #208) Fix false positive E121 with multiple brackets. (Issue #203) 1.4.5 (2013-03-06) When no path is specified, do not try to read from stdin. The feature was added in 1.4.3, but it is not supported on Windows. Use - filename argument to read from stdin. This usage is supported since 1.3.4. (Issue #170) Do not require setuptools in setup.py. It works around an issue with pip and Python 3. (Issue #172) Add __pycache__ to the ignore list. Change misleading message for E251. (Issue #171) Do not report false E302 when the source file has a coding cookie or a comment on the first line. (Issue #174) Reorganize the tests and add tests for the API and for the command line usage and options. (Issues #161 and #162) Ignore all checks which are not explicitly selected when select is passed to the StyleGuide constructor. 1.4.4 (2013-02-24) Report E227 or E228 instead of E225 for whitespace around bitwise, shift or modulo operators. (Issue #166) Change the message for E226 to make clear that it is about arithmetic operators. Fix a false positive E128 for continuation line indentation with tabs. Fix regression with the --diff option. (Issue #169) Fix the TestReport class to print the unexpected warnings and errors. 1.4.3 (2013-02-22) Hide the --doctest and --testsuite options when installed. Fix crash with AST checkers when the syntax is invalid. (Issue #160) Read from standard input if no path is specified. Initiate a graceful shutdown on Control+C. Allow to change the checker_class for the StyleGuide. 1.4.2 (2013-02-10) Support AST checkers provided by third-party applications. Register new checkers with register_check(func_or_cls, codes). Allow to construct a StyleGuide with a custom parser. Accept visual indentation without parenthesis after the if statement. (Issue #151) Fix UnboundLocalError when using # noqa with continued lines. (Issue #158) Re-order the lines for the StandardReport. Expand tabs when checking E12 continuation lines. (Issue #155) Refactor the testing class TestReport and the specific test functions into a separate test module. 1.4.1 (2013-01-18) Allow sphinx.ext.autodoc syntax for comments. (Issue #110) Report E703 instead of E702 for the trailing semicolon. (Issue #117) Honor # noqa in addition to # nopep8. (Issue #149) Expose the OptionParser factory for better extensibility. 1.4 (2012-12-22) Report E226 instead of E225 for optional whitespace around common operators (*, **, /, + and -). This new error code is ignored in the default configuration because PEP 8 recommends to "use your own judgement". (Issue #96) Lines with a # nopep8 at the end will not issue errors on line length E501 or continuation line indentation E12*. (Issue #27) Fix AssertionError when the source file contains an invalid line ending "\r\r\n". (Issue #119) Read the [pep8] section of tox.ini or setup.cfg if present. (Issue #93 and #141) Add the Sphinx-based documentation, and publish it on http://pep8.readthedocs.org/. (Issue #105)

Changelog: ================================================================================ GLM 0.9.5.4: 2014-06-21 -------------------------------------------------------------------------------- - Fixed non-utf8 character #196 - Added FindGLM install for CMake #189 - Fixed GTX_color_space - saturation #195 - Fixed glm::isinf and glm::isnan for with Android NDK 9d #191 - Fixed builtin GLM_ARCH_SSE4 #204 - Optimized Quaternion vector rotation #205 - Fixed missing doxygen @endcond tag #211 - Fixed instruction set detection with Clang #158 - Fixed orientate3 function #207 - Fixed lerp when cosTheta is close to 1 in quaternion slerp #210 - Added GTX_io for io with <iostream> #144 - Fixed fastDistance ambiguity #215 - Fixed tweakedInfinitePerspective #208 and added user-defined epsilon to tweakedInfinitePerspective - Fixed std::copy and std::vector with GLM types #214 - Fixed strict aliasing issues #212, #152 - Fixed std::nextafter not supported with C++11 on Android #213 - Fixed corner cases in exp and log functions for quaternions #199 ================================================================================ GLM 0.9.5.3: 2014-04-02 -------------------------------------------------------------------------------- - Added instruction set auto detection with Visual C++ using _M_IX86_FP - /arch compiler argument - Fixed GTX_raw_data code dependency - Fixed GCC instruction set detection - Added GLM_GTX_matrix_transform_2d extension (#178, #176) - Fixed CUDA issues (#169, #168, #183, #182) - Added support for all extensions but GTX_string_cast to CUDA - Fixed strict aliasing warnings in GCC 4.8.1 / Android NDK 9c (#152) - Fixed missing bitfieldInterleave definisions - Fixed usubBorrow (#171) - Fixed eulerAngle*** not consistent for right-handed coordinate system (#173) - Added full tests for eulerAngle*** functions (#173) - Added workaround for a CUDA compiler bug (#186, #185) ================================================================================ GLM 0.9.5.2: 2014-02-08 -------------------------------------------------------------------------------- - Fixed initializer list ambiguity (#159, #160) - Fixed warnings with the Android NDK 9c - Fixed non power of two matrix products - Fixed mix function link error - Fixed SSE code included in GLM tests on "pure" platforms - Fixed undefined reference to fastInverseSqrt (#161) - Fixed GLM_FORCE_RADIANS with <glm/ext.hpp> build error (#165) - Fix dot product clamp range for vector angle functions. (#163) - Tentative fix for strict aliasing warning in GCC 4.8.1 / Android NDK 9c (#152) - Fixed GLM_GTC_constants description brief (#162) ================================================================================ GLM 0.9.5.1: 2014-01-11 -------------------------------------------------------------------------------- - Fixed angle and orientedAngle that sometimes return NaN values (#145) - Deprecated degrees for function parameters and display a message - Added possible static_cast conversion of GLM types (#72) - Fixed error 'inverse' is not a member of 'glm' from glm::unProject (#146) - Fixed mismatch between some declarations and definitions - Fixed inverse link error when using namespace glm; (#147) - Optimized matrix inverse and division code (#149) - Added intersectRayPlane function (#153) - Fixed outerProduct return type (#155) ================================================================================ GLM 0.9.5.0: 2013-12-25 -------------------------------------------------------------------------------- - Added forward declarations (glm/fwd.hpp) for faster compilations - Added per feature headers - Minimized GLM internal dependencies - Improved Intel Compiler detection - Added bitfieldInterleave and _mm_bit_interleave_si128 functions - Added GTX_scalar_relational - Added GTX_dual_quaternion - Added rotation function to GTX_quaternion (#22) - Added precision variation of each type - Added quaternion comparison functions - Fixed GTX_multiple for negative value - Removed GTX_ocl_type extension - Fixed post increment and decrement operators - Fixed perspective with zNear == 0 (#71) - Removed l-value swizzle operators - Cleaned up compiler detection code for unsupported compilers - Replaced C cast by C++ casts - Fixed .length() that should return a int and not a size_t - Added GLM_FORCE_SIZE_T_LENGTH and glm::length_t - Removed unnecessary conversions - Optimized packing and unpacking functions - Removed the normalization of the up argument of lookAt function (#114) - Added low precision specializations of inversesqrt - Fixed ldexp and frexp implementations - Increased assert coverage - Increased static_assert coverage - Replaced GLM traits by STL traits when possible - Allowed including individual core feature - Increased unit tests completness - Added creating of a quaternion from two vectors - Added C++11 initializer lists - Fixed umulExtended and imulExtended implementations for vector types (#76) - Fixed CUDA coverage for GTC extensions - Added GTX_io extension - Improved GLM messages enabled when defining GLM_MESSAGES - Hidden matrix _inverse function implementation detail into private section ================================================================================ GLM 0.9.4.6: 2013-09-20 -------------------------------------------------------------------------------- - Fixed detection to select the last known compiler if newer version #106 - Fixed is_int and is_uint code duplication with GCC and C++11 #107 - Fixed test suite build while using Clang in C++11 mode - Added c++1y mode support in CMake test suite - Removed ms extension mode to CMake when no using Visual C++ - Added pedantic mode to CMake test suite for Clang and GCC - Added use of GCC frontend on Unix for ICC and Visual C++ fronted on Windows for ICC - Added compilation errors for unsupported compiler versions - Fixed glm::orientation with GLM_FORCE_RADIANS defined #112 - Fixed const ref issue on assignment operator taking a scalar parameter #116 - Fixed glm::eulerAngleY implementation #117 ================================================================================ GLM 0.9.4.5: 2013-08-12 -------------------------------------------------------------------------------- - Fixed CUDA support - Fixed inclusion of intrinsics in "pure" mode #92 - Fixed language detection on GCC when the C++0x mode isn't enabled #95 - Fixed issue #97: register is deprecated in C++11 - Fixed issue #96: CUDA issues - Added Windows CE detection #92 - Added missing value_ptr for quaternions #99 ================================================================================ GLM 0.9.4.4: 2013-05-29 -------------------------------------------------------------------------------- - Fixed slerp when costheta is close to 1 #65 - Fixed mat4x2 value_type constructor #70 - Fixed glm.natvis for Visual C++ 12 #82 - Added assert in inversesqrt to detect division by zero #61 - Fixed missing swizzle operators #86 - Fixed CUDA warnings #86 - Fixed GLM natvis for VC11 #82 - Fixed GLM_GTX_multiple with negative values #79 - Fixed glm::perspective when zNear is zero #71 ================================================================================ GLM 0.9.4.3: 2013-03-20 -------------------------------------------------------------------------------- - Detected qualifier for Clang - Fixed C++11 mode for GCC, couldn't be enabled without MS extensions - Fixed squad, intermediate and exp quaternion functions - Fixed GTX_polar_coordinates euclidean function, takes a vec2 instead of a vec3 - Clarify the license applying on the manual - Added a docx copy of the manual - Fixed GLM_GTX_matrix_interpolation - Fixed isnan and isinf on Android with Clang - Autodetected C++ version using __cplusplus value - Fixed mix for bool and bvec* third parameter ================================================================================ GLM 0.9.4.2: 2013-02-14 -------------------------------------------------------------------------------- - Fixed compAdd from GTX_component_wise - Fixed SIMD support for Intel compiler on Windows - Fixed isnan and isinf for CUDA compiler - Fixed GLM_FORCE_RADIANS on glm::perspective - Fixed GCC warnings - Fixed packDouble2x32 on XCode - Fixed mix for vec4 SSE implementation - Fixed 0x2013 dash character in comments that cause issue in Windows Japanese mode - Fixed documentation warnings - Fixed CUDA warnings ================================================================================ GLM 0.9.4.1: 2012-12-22 -------------------------------------------------------------------------------- - Improved half support: -0.0 case and implicit conversions - Fixed Intel Composer Compiler support on Linux - Fixed interaction between quaternion and euler angles - Fixed GTC_constants build - Fixed GTX_multiple - Fixed quat slerp using mix function when cosTheta close to 1 - Improved fvec4SIMD and fmat4x4SIMD implementations - Fixed assert messages - Added slerp and lerp quaternion functions and tests ================================================================================ GLM 0.9.4.0: 2012-11-18 -------------------------------------------------------------------------------- - Added Intel Composer Compiler support - Promoted GTC_espilon extension - Promoted GTC_ulp extension - Removed GLM website from the source repository - Added GLM_FORCE_RADIANS so that all functions takes radians for arguments - Fixed detection of Clang and LLVM GCC on MacOS X - Added debugger visualizers for Visual C++ 2012 ================================================================================ GLM 0.9.3.4: 2012-06-30 -------------------------------------------------------------------------------- - Added SSE4 and AVX2 detection. - Removed VIRTREV_xstream and the incompatibility generated with GCC - Fixed C++11 compiler option for GCC - Removed MS language extension option for GCC (not fonctionnal) - Fixed bitfieldExtract for vector types - Fixed warnings - Fixed SSE includes ================================================================================ GLM 0.9.3.3: 2012-05-10 -------------------------------------------------------------------------------- - Fixed isinf and isnan - Improved compatibility with Intel compiler - Added CMake test build options: SIMD, C++11, fast math and MS land ext - Fixed SIMD mat4 test on GCC - Fixed perspectiveFov implementation - Fixed matrixCompMult for none-square matrices - Fixed namespace issue on stream operators - Fixed various warnings - Added VC11 support

Version 2.0 ----------- (released Nov 9, 2014) - Default lexer encoding is now "guess", i.e. UTF-8 / Locale / Latin1 is tried in that order. - Major update to Swift lexer (pull request #410). - Multiple fixes to lexer guessing in conflicting cases: * recognize HTML5 by doctype * recognize XML by XML declaration * don't recognize C/C++ as SystemVerilog - Simplified regexes and builtin lists. Version 2.0rc1 -------------- (released Oct 16, 2014) - Dropped Python 2.4 and 2.5 compatibility. This is in favor of single-source compatibility between Python 2.6, 2.7 and 3.3+. - New website and documentation based on Sphinx (finally!) - Lexers added: * APL (#969) * Agda and Literate Agda (pull request #203) * Alloy (pull request #355) * AmbientTalk * BlitzBasic (pull request #197) * ChaiScript (pull request #24) * Chapel (pull request #256) * Cirru (pull request #275) * Clay (pull request #184) * ColdFusion CFC (pull request #283) * Cryptol and Literate Cryptol (pull request #344) * Cypher (pull request #257) * Docker config files * EBNF (pull request #193) * Eiffel (pull request #273) * GAP (pull request #311) * Golo (pull request #309) * Handlebars (pull request #186) * Hy (pull request #238) * Idris and Literate Idris (pull request #210) * Igor Pro (pull request #172) * Inform 6/7 (pull request #281) * Intel objdump (pull request #279) * Isabelle (pull request #386) * Jasmin (pull request #349) * JSON-LD (pull request #289) * Kal (pull request #233) * Lean (pull request #399) * LSL (pull request #296) * Limbo (pull request #291) * Liquid (#977) * MQL (pull request #285) * MaskJS (pull request #280) * Mozilla preprocessors * Mathematica (pull request #245) * NesC (pull request #166) * Nit (pull request #375) * Nix (pull request #267) * Pan * Pawn (pull request #211) * Perl 6 (pull request #181) * Pig (pull request #304) * Pike (pull request #237) * QBasic (pull request #182) * Red (pull request #341) * ResourceBundle (#1038) * Rexx (pull request #199) * Rql (pull request #251) * Rsl * SPARQL (pull request #78) * Slim (pull request #366) * Swift (pull request #371) * Swig (pull request #168) * TADS 3 (pull request #407) * Todo.txt todo lists * Twig (pull request #404) - Added a helper to "optimize" regular expressions that match one of many literal words; this can save 20% and more lexing time with lexers that highlight many keywords or builtins. - New styles: "xcode" and "igor", similar to the default highlighting of the respective IDEs. - The command-line "pygmentize" tool now tries a little harder to find the correct encoding for files and the terminal (#979). - Added "inencoding" option for lexers to override "encoding" analogous to "outencoding" (#800). - Added line-by-line "streaming" mode for pygmentize with the "-s" option. (pull request #165) Only fully works for lexers that have no constructs spanning lines! - Added an "envname" option to the LaTeX formatter to select a replacement verbatim environment (pull request #235). - Updated the Makefile lexer to yield a little more useful highlighting. - Lexer aliases passed to ``get_lexer_by_name()`` are now case-insensitive. - File name matching in lexers and formatters will now use a regex cache for speed (pull request #205). - Pygments will now recognize "vim" modelines when guessing the lexer for a file based on content (pull request #118). - Major restructure of the ``pygments.lexers`` module namespace. There are now many more modules with less lexers per module. Old modules are still around and re-export the lexers they previously contained. - The NameHighlightFilter now works with any Name.* token type (#790). - Python 3 lexer: add new exceptions from PEP 3151. - Opa lexer: add new keywords (pull request #170). - Julia lexer: add keywords and underscore-separated number literals (pull request #176). - Lasso lexer: fix method highlighting, update builtins. Fix guessing so that plain XML isn't always taken as Lasso (pull request #163). - Objective C/C++ lexers: allow "@" prefixing any expression (#871). - Ruby lexer: fix lexing of Name::Space tokens (#860) and of symbols in hashes (#873). - Stan lexer: update for version 2.4.0 of the language (pull request #162, PR#255, PR#377). - JavaScript lexer: add the "yield" keyword (pull request #196). - HTTP lexer: support for PATCH method (pull request #190). - Koka lexer: update to newest language spec (pull request #201). - Haxe lexer: rewrite and support for Haxe 3 (pull request #174). - Prolog lexer: add different kinds of numeric literals (#864). - F# lexer: rewrite with newest spec for F# 3.0 (#842), fix a bug with dotted chains (#948). - Kotlin lexer: general update (pull request #271). - Rebol lexer: fix comment detection and analyse_text (pull request #261). - LLVM lexer: update keywords to v3.4 (pull request #258). - PHP lexer: add new keywords and binary literals (pull request #222). - external/markdown-processor.py updated to newest python-markdown (pull request #221). - CSS lexer: some highlighting order fixes (pull request #231). - Ceylon lexer: fix parsing of nested multiline comments (#915). - C family lexers: fix parsing of indented preprocessor directives (#944). - Rust lexer: update to 0.9 language version (pull request #270, PR#388). - Elixir lexer: update to 0.15 language version (pull request #392). - Fix swallowing incomplete tracebacks in Python console lexer (#874).

Make DB_SIGNINGTABLE symbol available in Lua scripts. Fix bug #214: Handle arbitrarily large From: fields. LIBOPENDKIM: Fix bug #213: Remove "dkim_default_senderhdrs" from dkim.h. LIBOPENDKIM: Fix bug #219: Unresolved CNAMEs are not failures, according to the DNS (see RFC6604), so report them as NXDOMAIN or similar. 2.10.0 2014/12/27 Feature request #182: Remove "AddAllSignatureResults". All signature results will now be added via Authentication-Results header fields. Feature request #180: Rename "LDAPSoftStart" to "SoftStart" and apply it to SQL connections as well. Feature request #179: Add "IgnoreMalformedMail" option. Fix bug #183: Discontinue support for ADSP. This removes the following configuration file items: AddAllSignatureResults LocalADSP ADSPAction NoDiscardableMailTo ADSPNoSuchDomain On-PolicyError BogusPolicy SendADSPReports DisableADSP SenderHeaders LDAPSoftStart UnprotectedPolicy Make "rrvs" and "smime" recognized Authentication-Results methods. LIBOPENDKIM: Feature request #157: Add dkim_mail_parse_multi(). LIBOPENDKIM: Feature request #185: Add dkim_set_dnssec(). LIBOPENDKIM: Fix bug #183: Discontinue support for ADSP. This means all of the following: - the dkim_policy_t type has been removed - the DKIM_POLICY_* constants have been removed - the DKIM_PRESULT_* constants have been removed - passing DKIM_OPTS_SENDERHDRS to dkim_options() now results in an error - the DKIM_PSTATE structure has been removed - all of the following functions have been removed: dkim_policy(), dkim_policy_dnssec(), dkim_policy_getqueries(), dkim_policy_getreportinfo(), dkim_policy_state_free(), dkim_policy_state_new(), dkim_policy_syntax(), dkim_getpolicystr(), dkim_getpresult(), dkim_getpresultstr(), dkim_set_policy_lookup(), dkim_test_adsp() LIBOPENDKIM: DKIM_LIBFLAGS_STRICTHDRS now also confirms syntactical validity of the From field before proceeding with a signing or verifying operation. CONTRIB: Fix bug #207: Clean up the "stats" directory. CONTRIB: Add "repute" directory which could eventually replace the PHP implementation. CONTRIB: Patches to systemd and init/redhat.

* Support for client certificates via the new auth_cert parameter, see issue #182 and pull request #183. * The icalendar package is no longer required. * Several bugfixes related to collection creation.

Update DEPENDS Add test target Upstream changes: 2015-03-14 -- 1.4.3 * Remove three warnings: star-args, abstract-class-little-used, abstract-class-not-used. These warnings don't add any real value and they don't imply errors or problems in the code. * Added a new option for controlling the peephole optimizer in astroid. The option ``--optimize-ast`` will control the peephole optimizer, which is used to optimize a couple of AST subtrees. The current problem solved by the peephole optimizer is when multiple joined strings, with the addition operator, are encountered. If the numbers of such strings is high enough, Pylint will then fail with a maximum recursion depth exceeded error, due to its visitor architecture. The peephole just transforms such calls, if it can, into the final resulting string and this exhibit a problem, because the visit_binop method stops being called (in the optimized AST it will be a Const node). 2015-03-11 -- 1.4.2 * Don't require a docstring for empty modules. Closes issue #261. * Fix a false positive with `too-few-format-args` string warning, emitted when the string format contained a normal positional argument ('{0}'), mixed with a positional argument which did an attribute access ('{0.__class__}'). Closes issue #463. * Take in account all the methods from the ancestors when checking for too-few-public-methods. Closes issue #471. * Catch enchant errors and emit 'invalid-characters-in-docstring' when checking for spelling errors. Closes issue #469. * Use all the inferred statements for the super-init-not-called check. Closes issue #389. * Add a new warning, 'unichr-builtin', emitted by the Python 3 porting checker, when the unichr builtin is found. Closes issue #472. * Add a new warning, 'intern-builtin', emitted by the Python 3 porting checker, when the intern builtin is found. Closes issue #473. * Add support for editable installations. * The HTML output accepts the `--msg-template` option. Patch by Dan Goldsmith. * Add 'map-builtin-not-iterating' (replacing 'implicit-map-evaluation'), 'zip-builtin-not-iterating', 'range-builtin-not-iterating', and 'filter-builtin-not-iterating' which are emitted by `--py3k` when the appropriate built-in is not used in an iterating context (semantics taken from 2to3). * Add a new warning, 'unidiomatic-typecheck', emitted when an explicit typecheck uses type() instead of isinstance(). For example, `type(x) == Y` instead of `isinstance(x, Y)`. Patch by Chris Rebert. Closes issue #299. * Add support for combining the Python 3 checker mode with the --jobs flag (--py3k and --jobs). Closes issue #467. * Add a new warning for the Python 3 porting checker, 'using-cmp-argument', emitted when the `cmp` argument for the `list.sort` or `sorted builtin` is encountered. * Make the --py3k flag commutative with the -E flag. Also, this patch fixes the leaks of error messages from the Python 3 checker when the errors mode was activated. Closes issue #437. 2015-01-16 -- 1.4.1 * Look only in the current function's scope for bad-super-call. Closes issue #403. * Check the return of properties when checking for not-callable. Closes issue #406. * Warn about using the input() or round() built-ins for Python 3. Closes issue #411. * Proper abstract method lookup while checking for abstract-class-instantiated. Closes issue #401. * Use a mro traversal for finding abstract methods. Closes issue #415. * Fix a false positive with catching-non-exception and tuples of exceptions. * Fix a false negative with raising-non-exception, when the raise used an uninferrable exception context. * Fix a false positive on Python 2 for raising-bad-type, when raising tuples in the form 'raise (ZeroDivisionError, None)'. * Fix a false positive with invalid-slots-objects, where the slot entry was an unicode string on Python 2. Closes issue #421. * Add a new warning, 'redundant-unittest-assert', emitted when using unittest's methods assertTrue and assertFalse with constant value as argument. Patch by Vlad Temian. * Add a new JSON reporter, usable through -f flag. * Add the method names for the 'signature-differs' and 'argument-differs' warnings. Closes issue #433. * Don't compile test files when installing. * Fix a crash which occurred when using multiple jobs and the files given as argument didn't exist at all. 2014-11-23 -- 1.4.0 * Added new options for controlling the loading of C extensions. By default, only C extensions from the stdlib will be loaded into the active Python interpreter for inspection, because they can run arbitrary code on import. The option `--extension-pkg-whitelist` can be used to specify modules or packages that are safe to load. * Change default max-line-length to 100 rather than 80 * Drop BaseRawChecker class which were only there for backward compat for a while now * Don't try to analyze string formatting with objects coming from function arguments. Closes issue #373. * Port source code to be Python 2/3 compatible. This drops the need for 2to3, but does drop support for Python 2.5. * Each message now comes with a confidence level attached, and can be filtered base on this level. This allows to filter out all messages that were emitted even though an inference failure happened during checking. * Improved presenting unused-import message. Closes issue #293. * Add new checker for finding spelling errors. New messages: wrong-spelling-in-comment, wrong-spelling-in-docstring. New options: spelling-dict, spelling-ignore-words. * Add new '-j' option for running checks in sub-processes. * Added new checks for line endings if they are mixed (LF vs CRLF) or if they are not as expected. New messages: mixed-line-endings, unexpected-line-ending-format. New option: expected-line-ending-format. * 'dangerous-default-value' no longer evaluates the value of the arguments, which could result in long error messages or sensitive data being leaked. Closes issue #282 * Fix a false positive with string formatting checker, when encountering a string which uses only position-based arguments. Closes issue #285. * Fix a false positive with string formatting checker, when using keyword argument packing. Closes issue #288. * Proper handle class level scope for lambdas. * Handle 'too-few-format-args' or 'too-many-format-args' for format strings with both named and positional fields. Closes issue #286. * Analyze only strings by the string format checker. Closes issue #287. * Properly handle nested format string fields. Closes issue #294. * Don't emit 'attribute-defined-outside-init' if the attribute was set by a function call in a defining method. Closes issue #192. * Properly handle unicode format strings for Python 2. Closes issue #296. * Don't emit 'import-error' if an import was protected by a try-except, which excepted ImportError. * Fix an 'unused-import' false positive, when the error was emitted for all the members imported with 'from import' form. Closes issue #304. * Don't emit 'invalid-name' when assigning a name in an ImportError handler. Closes issue #302. * Don't count branches from nested functions. * Fix a false positive with 'too-few-format-args', when the format strings contains duplicate manual position arguments. Closes issue #310. * fixme regex handles comments without spaces after the hash. Closes issue #311. * Don't emit 'unused-import' when a special object is imported (__all__, __doc__ etc.). Closes issue #309. * Look in the metaclass, if defined, for members not found in the current class. Closes issue #306. * Don't emit 'protected-access' if the attribute is accessed using a property defined at the class level. * Detect calls of the parent's __init__, through a binded super() call. * Check that a class has an explicitly defined metaclass before emitting 'old-style-class' for Python 2. * Emit 'catching-non-exception' for non-class nodes. Closes issue #303. * Order of reporting is consistent. * Add a new warning, 'boolean-datetime', emitted when an instance of 'datetime.time' is used in a boolean context. Closes issue #239. * Fix a crash which ocurred while checking for 'method-hidden', when the parent frame was something different than a function. * Generate html output for missing files. Closes issue #320. * Fix a false positive with 'too-many-format-args', when the format string contains mixed attribute access arguments and manual fields. Closes issue #322. * Extend the cases where 'undefined-variable' and 'used-before-assignment' can be detected. Closes issue #291. * Add support for customising callback identifiers, by adding a new '--callbacks' command line option. Closes issue #326. * Add a new warning, 'logging-format-interpolation', emitted when .format() string interpolation is used within logging function calls. * Don't emit 'unbalanced-tuple-unpacking' when the rhs of the assignment is a variable length argument. Closes issue #329. * Add a new warning, 'inherit-non-class', emitted when a class inherits from something which is not a class. Closes issue #331. * Fix another false positives with 'undefined-variable', where the variable can be found as a class assignment and used in a function annotation. Closes issue #342. * Handle assignment of the string format method to a variable. Closes issue #351. * Support wheel packaging format for PyPi. Closes issue #334. * Check that various built-ins that do not exist in Python 3 are not used: apply, basestring, buffer, cmp, coerce, execfile, file, long raw_input, reduce, StandardError, unicode, reload and xrange. * Warn for magic methods which are not used in any way in Python 3: __coerce__, __delslice__, __getslice__, __setslice__, __cmp__, __oct__, __nonzero__ and __hex__. * Don't emit 'assigning-non-slot' when the assignment is for a property. Closes issue #359. * Fix for regression: '{path}' was no longer accepted in '--msg-template'. * Report the percentage of all messages, not just for errors and warnings. Closes issue #319. * 'too-many-public-methods' is reported only for methods defined in a class, not in its ancestors. Closes issue #248. * 'too-many-lines' disable pragma can be located on any line, not only the first. Closes issue #321. * Warn in Python 2 when an import statement is found without a corresponding `from __future__ import absolute_import`. * Warn in Python 2 when a non-floor division operation is found without a corresponding `from __future__ import division`. * Add a new option, 'exclude-protected', for excluding members from the protected-access warning. Closes issue #48. * Warn in Python 2 when using dict.iter*(), dict.view*(); none of these methods are available in Python 3. * Warn in Python 2 when calling an object's next() method; Python 3 uses __next__() instead. * Warn when assigning to __metaclass__ at a class scope; in Python 3 a metaclass is specified as an argument to the 'class' statement. * Warn when performing parameter tuple unpacking; it is not supported in Python 3. * 'abstract-class-instantiated' is also emitted for Python 2. It was previously disabled. * Add 'long-suffix' error, emitted when encountering the long suffix on numbers. * Add support for disabling a checker, by specifying an 'enabled' attribute on the checker class. * Add a new CLI option, --py3k, for enabling Python 3 porting mode. This mode will disable all other checkers and will emit warnings and errors for constructs which are invalid or removed in Python 3. * Add 'old-octal-literal' to Python 3 porting checker, emitted when encountering octals with the old syntax. * Add 'implicit-map-evaluation' to Python 3 porting checker, emitted when encountering the use of map builtin, without explicit evaluation. 2014-07-26 -- 1.3.0 * Allow hanging continued indentation for implicitly concatenated strings. Closes issue #232. * Pylint works under Python 2.5 again, and its test suite passes. * Fix some false positives for the cellvar-from-loop warnings. Closes issue #233. * Return new astroid class nodes when the inferencer can detect that that result of a function invocation on a type (like `type` or `abc.ABCMeta`) is requested. Closes #205. * Emit 'undefined-variable' for undefined names when using the Python 3 `metaclass=` argument. * Checkers respect priority now. Close issue #229. * Fix a false positive regarding W0511. Closes issue #149. * Fix unused-import false positive with Python 3 metaclasses (#143). * Don't warn with 'bad-format-character' when encountering the 'a' format on Python 3. * Add multiple checks for PEP 3101 advanced string formatting: 'bad-format-string', 'missing-format-argument-key', 'unused-format-string-argument', 'format-combined-specification', 'missing-format-attribute' and 'invalid-format-index'. * Issue broad-except and bare-except even if the number of except handlers is different than 1. Fixes issue #113. * Issue attribute-defined-outside-init for all cases, not just for the last assignment. Closes issue #262. * Emit 'not-callable' when calling properties. Closes issue #268. * Fix a false positive with unbalanced iterable unpacking, when encountering starred nodes. Closes issue #273. * Add new checks, 'invalid-slice-index' and 'invalid-sequence-index' for invalid sequence and slice indices. * Add 'assigning-non-slot' warning, which detects assignments to attributes not defined in slots. * Don't emit 'no-name-in-module' for ignored modules. Closes issue #223. * Fix an 'unused-variable' false positive, where the variable is assigned through an import. Closes issue #196. * Definition order is considered for classes, function arguments and annotations. Closes issue #257. * Don't emit 'unused-variable' when assigning to a nonlocal. Closes issue #275. * Do not let ImportError propagate from the import checker, leading to crash in some namespace package related cases. Closes issue #203. * Don't emit 'pointless-string-statement' for attribute docstrings. Closes issue #193. * Use the proper mode for pickle when opening and writing the stats file. Closes issue #148. * Don't emit hidden-method message when the attribute has been monkey-patched, you're on your own when you do that. * Only emit attribute-defined-outside-init for definition within the same module as the offended class, avoiding to mangle the output in some cases. * Don't emit 'unnecessary-lambda' if the body of the lambda call contains call chaining. Closes issue #243. * Don't emit 'missing-docstring' when the actual docstring uses `.format`. Closes issue #281. 2014-04-30 -- 1.2.1 * Restore the ability to specify the init-hook option via the configuration file, which was accidentally broken in 1.2.0. * Add a new warning [bad-continuation] for badly indentend continued lines. * Emit [assignment-from-none] when the function contains bare returns. Fixes BitBucket issue #191. * Added a new warning for closing over variables that are defined in loops. Fixes Bitbucket issue #176. * Do not warn about \u escapes in string literals when Unicode literals are used for Python 2.*. Fixes BitBucket issue #151. * Extend the checking for unbalanced-tuple-unpacking and unpacking-non-sequence to instance attribute unpacking as well. * Fix explicit checking of python script (1.2 regression, #219) * Restore --init-hook, renamed accidentally into --init-hooks in 1.2.0 (#211) * Add 'indexing-exception' warning, which detects that indexing an exception occurs in Python 2 (behaviour removed in Python 3). 2014-04-18 -- 1.2.0 * Pass the current python paths to pylint process when invoked via epylint. Fixes BitBucket issue #133. * Add -i / --include-ids and -s / --symbols back as completely ignored options. Fixes BitBucket issue #180. * Extend the number of cases in which logging calls are detected. Fixes bitbucket issue #182. * Improve pragma handling to not detect pylint:* strings in non-comments. Fixes BitBucket issue #79. * Do not crash with UnknownMessage if an unknown message ID/name appears in disable or enable in the configuration. Patch by Cole Robinson. Fixes bitbucket issue #170. * Add new warning 'eval-used', checking that the builtin function `eval` was used. * Make it possible to show a naming hint for invalid name by setting include-naming-hint. Also make the naming hints configurable. Fixes BitBucket issue #138. * Added support for enforcing multiple, but consistent name styles for different name types inside a single module; based on a patch written by [email protected]. * Also warn about empty docstrings on overridden methods; contributed by [email protected]. * Also inspect arguments to constructor calls, and emit relevant warnings; contributed by [email protected]. * Added a new configuration option logging-modules to make the list of module names that can be checked for 'logging-not-lazy' et. al. configurable; contributed by [email protected]. * ensure init-hooks is evaluated before other options, notably load-plugins (#166) * Python 2.5 support restored: fixed small issues preventing pylint to run on python 2.5. Bitbucket issues #50 and #62. * bitbucket #128: pylint doesn't crash when looking for used-before-assignment in context manager assignments. * Add new warning, 'bad-reversed-sequence', for checking that the reversed() builtin receive a sequence (implements __getitem__ and __len__, without being a dict or a dict subclass) or an instance which implements __reversed__. * Mark `file` as a bad function when using python2 (closes #8). * Add new warning 'bad-exception-context', checking that `raise ... from ...` uses a proper exception context (None or an exception). * Enhance the check for 'used-before-assignment' to look for 'nonlocal' uses. * Emit 'undefined-all-variable' if a package's __all__ variable contains a missing submodule (closes #126). * Add a new warning 'abstract-class-instantiated' for checking that abstract classes created with `abc` module and with abstract methods are instantied. * Do not warn about 'return-arg-in-generator' in Python 3.3+. * Do not warn about 'abstract-method' when the abstract method is implemented through assignment (#155). * Improve cyclic import detection in the case of packages, patch by Buck Golemon * Add new warnings for checking proper class __slots__: `invalid-slots-object` and `invalid-slots`. * Search for rc file in `~/.config/pylintrc` if `~/.pylintrc` doesn't exists (#121) * Don't register the newstyle checker w/ python >= 3 * Fix unused-import false positive w/ augment assignment (#78) * Fix access-member-before-definition false negative wrt aug assign (#164) * Do not attempt to analyze non python file, eg .so file (#122)

Release 1.10.1 (2015-06-15) ''''''''''''''''''''''''''' User Interface / Configuration Changes -------------------------------------- The "``tahoe cp``" CLI command's ``--recursive`` option is now more predictable, but behaves slightly differently than before. See below for details. Tickets `#712`_, `#2329`_. The SFTP server can now use public-key authentication (instead of only password-based auth). Public keys are configured through an "account file", just like passwords. See docs/frontends/FTP-and-SFTP for examples of the format. `#1411`_ The Tahoe node can now be configured to disable automatic IP-address detection. Using "AUTO" in tahoe.cfg [node]tub.location= (which is now the default) triggers autodetection. Omit "AUTO" to disable autodetection. "AUTO" can be combined with static addresses to e.g. use both a stable UPnP-configured tunneled address and a DHCP-assigned dynamic (local subnet only) address. See `configuration.rst`_ for details. `#754`_ The web-based user interface ("WUI") Directory and Welcome pages have been redesigned, with improved CSS for narrow windows and more-accessible icons (using distinctive shapes instead of just colors). `#1931`_ `#1961`_ `#1966`_ `#1972`_ `#1901`_ .. _`#712`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/712 .. _`#754`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/754 .. _`#1411`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1411 .. _`#1901`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1901 .. _`#1931`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1931 .. _`#1961`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1961 .. _`#1966`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1966 .. _`#1972`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1972 .. _`#2329`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2329 .. _`configuration.rst`: docs/configuration.rst "tahoe cp" changes ------------------ The many ``cp``-like tools in the Unix world (POSIX ``/bin/cp``, the ``scp`` provided by SSH, ``rsync``) all behave slightly differently in unusual circumstances, especially when copying whole directories into a target that may or may not already exist. The most common difference is whether the user is referring to the source directory as a whole, or to its contents. For example, should "``cp -r foodir bardir``" create a new directory named "``bardir/foodir``"? Or should it behave more like "``cp -r foodir/* bardir``"? Some tools use the presence of a trailing slash to indicate which behavior you want. Others ignore trailing slashes. "``tahoe cp``" is no exception to having exceptional cases. This release fixes some bad behavior and attempts to establish a consistent rationale for its behavior. The new rule is: - If the thing being copied is a directory, and it has a name (e.g. it's not a raw Tahoe-LAFS directorycap), then you are referring to the directory itself. - If the thing being copied is an unnamed directory (e.g. raw dircap or alias), then you are referring to the contents. - Trailing slashes do not affect the behavior of the copy (although putting a trailing slash on a file-like target is an error). - The "``-r``" (``--recursive``) flag does not affect the behavior of the copy (although omitting ``-r`` when the source is a directory is an error). - If the target refers to something that does not yet exist: - and if the source is a single file, then create a new file; - otherwise, create a directory. There are two main cases where the behavior of Tahoe-LAFS v1.10.1 differs from that of the previous v1.10.0 release: - "``cp DIRCAP/file.txt ./local/missing``" , where "``./local``" is a directory but "``./local/missing``" does not exist. The implication is that you want Tahoe to create a new file named "``./local/missing``" and fill it with the contents of the Tahoe-side ``DIRCAP/file.txt``. In v1.10.0, a plain "``cp``" would do just this, but "``cp -r``" would do "``mkdir ./local/missing``" and then create a file named "``./local/missing/file.txt``". In v1.10.1, both "``cp``" and "``cp -r``" create a file named "``./local/missing``". - "``cp -r PARENTCAP/dir ./local/missing``", where ``PARENTCAP/dir/`` contains "``file.txt``", and again "``./local``" is a directory but "``./local/missing``" does not exist. In both v1.10.0 and v1.10.1, this first does "``mkdir ./local/missing``". In v1.10.0, it would then copy the contents of the source directory into the new directory, resulting in "``./local/missing/file.txt``". In v1.10.1, following the new rule of "a named directory source refers to the directory itself", the tool creates "``./local/missing/dir/file.txt``". Compatibility and Dependency Updates ------------------------------------ Windows now requires Python 2.7. Unix/OS-X platforms can still use either Python 2.6 or 2.7, however this is probably the last release that will support 2.6 (it is no longer receiving security updates, and most OS distributions have switched to 2.7). Tahoe-LAFS now has the following dependencies: - Twisted >= 13.0.0 - Nevow >= 0.11.1 - foolscap >= 0.8.0 - service-identity - characteristic >= 14.0.0 - pyasn1 >= 0.1.4 - pyasn1-modules >= 0.0.5 On Windows, if pywin32 is not installed then the dependencies on Twisted and Nevow become: - Twisted >= 11.1.0, <= 12.1.0 - Nevow >= 0.9.33, <= 0.10 On all platforms, if pyOpenSSL >= 0.14 is installed, then it will be used, but if not then only pyOpenSSL >= 0.13, <= 0.13.1 will be built when directly invoking `setup.py build` or `setup.py install`. We strongly advise OS packagers to take the option of making a tahoe-lafs package depend on pyOpenSSL >= 0.14. In order for that to work, the following additional Python dependencies are needed: - cryptography - cffi >= 0.8 - six >= 1.4.1 - enum34 - pycparser as well as libffi (for Debian/Ubuntu, the name of the needed OS package is `libffi6`). Tahoe-LAFS is now compatible with Setuptools version 8 and Pip version 6 or later, which should fix execution on Ubuntu 15.04 (it now tolerates PEP440 semantics in dependency specifications). `#2354`_ `#2242`_ Tahoe-LAFS now depends upon foolscap-0.8.0, which creates better private keys and certificates than previous versions. To benefit from the improvements (2048-bit RSA keys and SHA256-based certificates), you must re-generate your Tahoe nodes (which changes their TubIDs and FURLs). `#2400`_ .. _`#2242`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2242 .. _`#2354`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2354 .. _`#2400`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2400 Packaging --------- A preliminary OS-X package, named "``tahoe-lafs-VERSION-osx.pkg``", is now being generated. It is a standard double-clickable installer, which creates ``/Applications/tahoe.app`` that embeds a complete runtime tree. However launching the ``.app`` only brings up a notice on how to run tahoe from the command line. A future release may turn this into a fully-fledged application launcher. `#182`_ `#2393`_ `#2323`_ Preliminary Docker support was added. Tahoe container images may be available on DockerHub. `PR#165`_ `#2419`_ `#2421`_ Old and obsolete Debian packaging tools have been removed. `#2282`_ .. _`#182`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/182 .. _`#2282`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2282 .. _`#2323`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2323 .. _`#2393`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2393 .. _`#2419`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2419 .. _`#2421`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2421 .. _`PR#165`: tahoe-lafs/tahoe-lafs#165 Minor Changes ------------- - Welcome page: add per-server "(space) Available" column. `#648`_ - check/deep-check learned to accept multiple location arguments. `#740`_ - Checker reports: remove needs-rebalancing, add count-happiness. `#1784`_ `#2105`_ - CLI ``--help``: cite (but don't list) global options on each command. `#2233`_ - Fix ftp "``ls``" to work with Twisted 15.0.0. `#2394`_ .. _`#648`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/648 .. _`#740`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/740 .. _`#1784`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1784 .. _`#2105`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2105 .. _`#2233`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2233 .. _`#2394`: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/2394 Roughly 75 tickets were closed in this release: 623 648 712 740 754 898 1146 1159 1336 1381 1411 1634 1674 1698 1707 1717 1737 1784 1800 1807 1842 1847 1901 1918 1953 1960 1961 1966 1969 1972 1974 1988 1992 2005 2008 2023 2027 2028 2034 2048 2067 2086 2105 2121 2128 2165 2193 2208 2209 2233 2235 2242 2245 2248 2249 2249 2280 2281 2282 2290 2305 2312 2323 2340 2354 2380 2393 2394 2398 2400 2415 2416 2417 2433. Another dozen were referenced but not closed: 182 666 982 1064 1258 1531 1536 1742 1834 1931 1935 2286. Roughly 40 GitHub pull-requests were closed: 32 48 50 56 57 61 62 62 63 64 69 73 81 82 84 85 87 91 94 95 96 103 107 109 112 114 120 122 125 126 133 135 136 137 142 146 149 152 165. For more information about any ticket, visit e.g. https://tahoe-lafs.org/trac/tahoe-lafs/ticket/754

Due to a change in packaging the docs themes are currently excluded from the pypi distribution, breaking the -docs package. Issue ``#761`` should address this upstream; we'll being using GitHub as the master site for the time being. Version 0.10.4 -------------- (bugfix release, released on March 26th 2015) - Re-release of 0.10.3 with packaging artifacts manually removed. Version 0.10.3 -------------- (bugfix release, released on March 26th 2015) - Re-release of 0.10.2 without packaging artifacts. Version 0.10.2 -------------- (bugfix release, released on March 26th 2015) - Fixed issue where ``empty`` could break third-party libraries that relied on keyword arguments (pull request ``#675``) - Improved ``Rule.empty`` by providing a ```get_empty_kwargs`` to allow setting custom kwargs without having to override entire ``empty`` method. (pull request ``#675``) - Fixed ```extra_files``` parameter for reloader to not cause startup to crash when included in server params - Using `MultiDict` when building URLs is now not supported again. The behavior introduced several regressions. - Fix performance problems with stat-reloader (pull request ``#715``). Version 0.10.1 -------------- (bugfix release, released on February 3rd 2015) - Fixed regression with multiple query values for URLs (pull request ``#667``). - Fix issues with eventlet's monkeypatching and the builtin server (pull request ``#663``). Version 0.10 ------------ Released on January 30th 2015, codename Bagger. - Changed the error handling of and improved testsuite for the caches in ``contrib.cache``. - Fixed a bug on Python 3 when creating adhoc ssl contexts, due to `sys.maxint` not being defined. - Fixed a bug on Python 3, that caused :func:`~werkzeug.serving.make_ssl_devcert` to fail with an exception. - Added exceptions for 504 and 505. - Added support for ChromeOS detection. - Added UUID converter to the routing system. - Added message that explains how to quit the server. - Fixed a bug on Python 2, that caused ``len`` for :class:`werkzeug.datastructures.CombinedMultiDict` to crash. - Added support for stdlib pbkdf2 hmac if a compatible digest is found. - Ported testsuite to use ``py.test``. - Minor optimizations to various middlewares (pull requests ``#496`` and ``#571``). - Use stdlib ``ssl`` module instead of ``OpenSSL`` for the builtin server (issue ``#434``). This means that OpenSSL contexts are not supported anymore, but instead ``ssl.SSLContext`` from the stdlib. - Allow protocol-relative URLs when building external URLs. - Fixed Atom syndication to print time zone offset for tz-aware datetime objects (pull request ``#254``). - Improved reloader to track added files and to recover from broken sys.modules setups with syntax errors in packages. - ``cache.RedisCache`` now supports arbitrary ``**kwargs`` for the redis object. - ``werkzeug.test.Client`` now uses the original request method when resolving 307 redirects (pull request ``#556``). - ``werkzeug.datastructures.MIMEAccept`` now properly deals with mimetype parameters (pull request ``#205``). - ``werkzeug.datastructures.Accept`` now handles a quality of ``0`` as intolerable, as per RFC 2616 (pull request ``#536``). - ``werkzeug.urls.url_fix`` now properly encodes hostnames with ``idna`` encoding (issue ``#559``). It also doesn't crash on malformed URLs anymore (issue ``#582``). - ``werkzeug.routing.MapAdapter.match`` now recognizes the difference between the path ``/`` and an empty one (issue ``#360``). - The interactive debugger now tries to decode non-ascii filenames (issue ``#469``). - Increased default key size of generated SSL certificates to 1024 bits (issue ``#611``). - Added support for specifying a ``Response`` subclass to use when calling :func:`~werkzeug.utils.redirect`\ . - ``werkzeug.test.EnvironBuilder`` now doesn't use the request method anymore to guess the content type, and purely relies on the ``form``, ``files`` and ``input_stream`` properties (issue ``#620``). - Added Symbian to the user agent platform list. - Fixed make_conditional to respect automatically_set_content_length - Unset ``Content-Length`` when writing to response.stream (issue ``#451``) - ``wrappers.Request.method`` is now always uppercase, eliminating inconsistencies of the WSGI environment (issue ``647``). - ``routing.Rule.empty`` now works correctly with subclasses of ``Rule`` (pull request ``#645``). - Made map updating safe in light of concurrent updates. - Allow multiple values for the same field for url building (issue ``#658``). Version 0.9.7 ------------- (bugfix release, release date to be decided) - Fix unicode problems in ``werkzeug.debug.tbtools``. - Fix Python 3-compatibility problems in ``werkzeug.posixemulation``. - Backport fix of fatal typo for ``ImmutableList`` (issue ``#492``). - Make creation of the cache dir for ``FileSystemCache`` atomic (issue ``#468``). - Use native strings for memcached keys to work with Python 3 client (issue ``#539``). - Fix charset detection for ``werkzeug.debug.tbtools.Frame`` objects (issues ``#547`` and ``#532``). - Fix ``AttributeError`` masking in ``werkzeug.utils.import_string`` (issue ``#182``). - Explicitly shut down server (issue ``#519``). - Fix timeouts greater than 2592000 being misinterpreted as UNIX timestamps in ``werkzeug.contrib.cache.MemcachedCache`` (issue ``#533``). - Fix bug where ``werkzeug.exceptions.abort`` would raise an arbitrary subclass of the expected class (issue ``#422``). - Fix broken ``jsrouting`` (due to removal of ``werkzeug.templates``) - ``werkzeug.urls.url_fix`` now doesn't crash on malformed URLs anymore, but returns them unmodified. This is a cheap workaround for ``#582``, the proper fix is included in version 0.10. - The repr of ``werkzeug.wrappers.Request`` doesn't crash on non-ASCII-values anymore (pull request ``#466``). - Fix bug in ``cache.RedisCache`` when combined with ``redis.StrictRedis`` object (pull request ``#583``). - The ``qop`` parameter for ``WWW-Authenticate`` headers is now always quoted, as required by RFC 2617 (issue ``#633``). - Fix bug in ``werkzeug.contrib.cache.SimpleCache`` with Python 3 where add/set may throw an exception when pruning old entries from the cache (pull request ``#651``).

pkgsrc changes: * Now liferea depends on www/webkit24-gtk3 (and x11/gtk3) * Update DESCR, MASTER_SITES, HOMEPAGE Changes: 2015-06-19 Lars Windolf <[email protected]> Version 1.10.16 * Fixes Github #180: Removing item from (v)folder marks all read (reported by GreenLunar) * Fixes Github #140, #158: Vertical pane placement is forgotten. (patch by foresto) * Fixes Github #182: Missing config.h include in date.c (reported by Paul Gevers) 2015-04-20 Lars Windolf <[email protected]> Version 1.10.15 * Fixes launching URLs in Firefox 36+ (reported by Geoffrey Leach) * Fixes Github #30: Segfault after updating from 1.8 to 1.10 (reported by vakuum) * Improves Github #36, #113: UI lock up during refresh (suggested by mozbugbox) * Fixes typo in Italian translation. 2015-02-26 Lars Windolf <[email protected]> Version 1.10.14 * Fixes Github #154: Crashes while starting (on corrupt icon) (reported by jcamposz) * Fixes Github #134: Broken default news feed. (reported by pvdl) * Fixes Github #122: Crashes at launch, "segmentation fault" (reported by geoffm) * Fixes some memory leaks (patch by Rich Coe) * Fixes Github #145: Wrong method triggered on 'Launch External' (patch by mozbugbox) * Fixes Github #149: Fixes a random crash on startup (patch by mozbugbox) * Fixes all issues reported by Coverity scan 2015-01-07 Lars Windolf <[email protected]> Version 1.10.13 * Fixes Github #112: Wrapping issue in folder display (reported by Jeff Fortin) * Fixes Github #114: Avoid termination on UTF-8 validation error * Fixes Github #132: Broken link in documentation (reported by kallus) 2014-10-14 Lars Windolf <[email protected]> Version 1.10.12 * Fixes Github #86: Support HTTP content negotiation (suggested by DanMan) * Fixes Github #98: Stop calling Atom person constructs w/ URI invalid (patch by Aristotle Pagaltzis) * Fixes Github #100: Problems with dark Adwaita theme in GTK 3.14 (reported by majutsushi) 2014-08-24 Lars Windolf <[email protected]> Version 1.10.11 * Fixes Github #53: Doesn't automatically update feed name and favicon for new feed (reported by asl97) * Fixes Github #67: Missing dist files for documentation (patch by Mikel Olasagasti) * Fixes Javascript links not opening in new browser tabs * Updated French translation (Guillaume Bernard) * Updated Hebrew translation (Genghis Khan) 2014-07-20 Lars Windolf <[email protected]> Version 1.10.10 * Fixes Github #26: RTL comments appear incorrectly (reported by yaronf) * Fixes Github #21: No notifications for Tiny Tiny RSS feeds (reported by simontunnat) 2014-04-21 Lars Windolf <[email protected]> Version 1.10.9 * Fixes Github #19: non void function should return value (reported by kwm81) * Fixes SF #1141: Liferea does not update feeds with TinyTinyRSS (reported by Dominik Grafenhofer, denk_mal, Fabian Henze) * Fixes SF #1150: subscription prop/source: not all fields and buttons visible (reported by David Smith) 2014-03-26 Lars Windolf <[email protected]> Version 1.10.8 * Fixes Github #13: Parsing errors not visible with dark themes (reported by Steve Kelly) * Fixes SF #1137, #1142: startup race with LifereaHtmlView (reported by Yanko Kaneti) 2014-03-17 Lars Windolf <[email protected]> Version 1.10.7 * Make Liferea use ETags and send If-None-Match (patch by Chris Siebenmann) 2014-02-24 Lars Windolf <[email protected]> Version 1.10.6 * Fixes SF #1135: liferea-add-feed doesn't process feed:https// (patch by Kevin Walke) * Fixes SF #1137: crash on startup in enclosure_list_view_load (reported in Redhat #1048499, Fedora #214888) 2014-01-15 Lars Windolf <[email protected]> Version 1.10.5 * Fixes #1056, #1089, #1098: Honor preferences when opening links (patch by Daniel Seither) * Fixes SF #1096: missing installation of liferea.convert file (reported by stqn) * Fixes Redhat #947358: popup notification only for new items (patch by Fabrice Bellet) 2014-01-13 Lars Windolf <[email protected]> Version 1.10.4 * Fixes SF #1123: Mistakenly claims "TinyTinyRSS source is not self-updating" (reported by Dominik Grafenhoher) * Fixes SF #1119: Crash on font resize at startup. (reported by David Smith) * Fixes #1117: Selecting last unread item in reduced feed list jumps to next feed (reported by Bruce Guenter) * Updated Arabic translation (Khaled Hosny) 2013-10-08 Lars Windolf <[email protected]> Version 1.10.3 * Asking for credentials again if TinyTinyRSS login fails * Asking for TinyTinyRSS credentials only 3 times * Checking wether TinyTinyRSS base URL is lost * Added warning on TinyTinyRSS login when source is not self-updating * "--debug-net --debug-verbose" now traces POST data * Patch #230 Add GNOME AppData XML (Mikel Olasagasti) * Updated Italian translation (Gianvito Cavasoli) * Updated Italian localized feed list (Gianvito Cavasoli) 2013-09-05 Lars Windolf <[email protected]> Version 1.10.2 * Patch SF #222: Make media player seekable (Simon Kågedal Reimer) * Fixes SF #1102: Spelling error in man page (David Smith) * Fixes SF #1104: liferea.desktop missing keywords (David Smith) * Fixes SF #1105: Start Minimized to Tray Does Not Work (reported by bitlord) * Fixes SF #1114: Crashes opening browser on item without link via popup (reported by Rich Coe, David Smith) * Improved handling of broken Atom author information. (Lars Windolf) * Removed dead Google Reader code to avoid doing requests to Google. Replaced with dummy source that even allows normal feed updates. (Lars Windolf) * Added hint to FAQ on how to workaround broken Flash support (Lars Windolf) * Dumping feedlist.opml with indentation for readability. (suggested by Christoph Temmel and Simon Kågedal Reimer) 2013-07-28 Lars Windolf <[email protected]> Version 1.10.1a * Fixes SF #1102: Liferea does not show a window (reported by genodeftest) 2013-07-28 Lars Windolf <[email protected]> Version 1.10.1 * Fixes SF #1059: Liferea crashes with system proxy enabled (reported by genodeftest) * Fixes SF #1095: Theme color detection bug / white fonts. (reported by David Smith and others) * Fixes SF #1097: Default feed refresh interval cannot be set to 0 (reported by stqn) * Fixes SF #1100: --debug-gui crashes with segmentation fault (reported by genodeftest) * Fixes SF #1101: Outdated manpage (reported by genodeftest) * Patch SF #225: Make media player work with GStreamer 1.0 (Simon Kågedal Reimer) * Patch SF #226: Add trailing semi-colon to MimeType so that the desktop file validates (Yanko Kaneti) * Patch SF #227: Remove letfover square bracket configure.ac (Yanko Kaneti) * Patch SF #228: Add net.sf.liferea.gschema.xml to AC_CONFIG_FILES (Yanko Kaneti) 2013-07-10 Lars Windolf <[email protected]> Version 1.10.0 * Added experimental sync support for TheOldReader (Lars Windolf) * Removed 'Update' link in comments display as it is pretty useless (Lars Windolf) * Removed 'No Comments' display as it is rather useless (Lars Windolf) * Prevent re-rendering item display on setting item flagged (Lars Windolf) * Changed unread number rendering to be right bound and non-ellipsized (Lars Windolf) * Fixes g_strstr_len assertions caused by search folder item matching (Rich Coe) * Updated documentation to reflect Google Reader, TheOldReader changes (Lars Windolf) * Removed welcome text, restoring last feed/item selection instead (Lars Windolf) * autogen.sh now reports errors on missing autoconf or intltool (suggested by Scott Kostyshak) * Correctly check for gobject-introspection build dependency (suggested by Scott Kostyshak) * Updated Basque translation (Mikel Olasagasti Uranga) * Updated Danish translation (Joe Hansen) * Updated Dutch translation (Erwin Poeze) * Updated Finnish translation (Jorma Karvonen) * Updated Russian translation (Leonid Selivanov) * Updated Ukrainian translation (Yuri Chornoivan) * Updated Vietnamese translation (Trần Ngọc Quân) * Updated German translation (Lars Windolf) 2013-05-22 Lars Windolf <[email protected]> Version 1.10-RC4 * Added an option to convert Google Reader subscriptions to local feeds (Lars Windolf) * Fixes SF #1080: segfault opening attachment due to incorrect g_free() (reported by Adam Nielsen) * Fixes SF #1075: GLib warnings of "string != NULL" assertion failure (reported by Simon Kågedal Reimer) * Fixes missing shading in 2-pane mode rendering (reported by Zoho Vignochi) * Fixes search folders including comment items (reported by David Willmore) 2013-05-22 Lars Windolf <[email protected]> Version 1.10-RC3 * Fixes SF #1069: broken rendering in tt-rss feeds (patch by Simon Kågedal Reimer) * Merged SF #219: View *.xml files along with *.opml files in file chooser (patch by Simon Kågedal Reimer) * Merged SF #233: Show feed name in item view when in merged views. (patch by Simon Kågedal Reimer) * Merged SF #193: Use GtkInfoBar for note in preferences window (patch by Fred Morcos) * Require intltool >= 0.40.4 (Adrian Bunk) * Updated Catalan translation (Gil Forcada) * Updated Danish translation (Joe Hansen) * Updated Polish translation (Piotr Sokół) 2013-05-12 Lars Windolf <[email protected]> Version 1.10-RC2 * Extended user agent by "AppleWebKit (KHTML, like Gecko)" to solve incorrect mobile redirect with zdf.de * Added social bookmarking support for Mister Wong * Added social bookmarking support for Google Bookmarks * Update of German FAQ * Update of English FAQ * Added MimeType to .desktop file (Craig Barnes) * Fixes SF #1063: Can't open preferences twice (Emilio Pozuelo Monfort, reported by David Smith) * Fixes SF #1040: In feed entries, spaces are replaced with "+" (reported by Emmanuel Seyman) * Fixes SF #1051: Issues in RTL GUI of Liferea (reported by phixy) * Fixes SF #1038, #1074: Updates ttrss feeds over and over (reported by many users) * Fix several memory leaks (Emilio Pozuelo Monfort) * Require glib >= 2.28 for GApplication (Adrian Bunk) * Use the GTK+ 3 version, not wrongly the GTK+ 2 version, of the libindicate GTK+ bindings (Adrian Bunk) * Updated the default feedlists (Adrian Bunk) * Removed support for libnotify < 0.7 (Adrian Bunk) * Added Vietnamese translation (Trần Ngọc Quân) * Updated Albanian translation (Besnik Bleta) * Updated Asturian translation (Iñigo Varela) * Updated Basque translation (Mikel Olasagasti Uranga) * Updated Danish translation (Joe Hansen) * Updated Finnish translation (Jorma Karvonen) * Updated German translation (Christian Stadelmann) * Updated Hungarian translation (Gabor Kelemen) * Updated Japanese translation (Takeshi Hamasaki) * Updated Latvian translation (Rihards Priedītis) * Updated Ukrainian translation (Yuri Chornoivan) 2013-01-30 Lars Windolf <[email protected]> Version 1.10-RC1 Please note that due to the SourceForge upgrade bug ticket numbering did change. This might be confusing... Old numbers are 7 figures, newer ones only 4! * Patch SF #3407290: Migrate to GSettings (by Mikel Olasagasti) * Patch SF #3579177: Change .desktop category to News;Feed; (by Stanislav Brabec) * Fix for Debian #668197: x-www-browser preference not working (David Smith) * Added slider and time display to media player plugin. * Added Google Plus to social bookmarking options. * Removing deprecated g_thread_init() call * Auto-enable plugins on migration * Added missing -a option to manpage * Updated manpage to reflect XDG path migration * Changing GSettings path from /apps/liferea to /org/gnome/liferea * Changes default download thread concurrency from 2 to 3 * Fixes regression about using the GNOME default font * Improves all item/link launching menus to consistently provide three options: Tab, Browser and External Browser * Fixes SF #1037: Incorrect notifications for Google Reader (patch by David Smith) * Fixes SF #1048: Removed all feedvalidator.org references from FAQ and XSLT as it was reported to host malware. (reported by bkat) * Fixes SF #1041: Some GPLv2 license headers were outdated (reported by Emmanuel Seyman) * Fixes SF #1044: tt-rss API changed (we now support only 1.6 API) (patch by Sebastian Noel) * Fixes assertion when creating new tt-rss subscriptions * Fixes XHTML errors caused by extra <body> tags returned by tt-rss * Fixes missing item list update when browsing item URLs in Liferea 2012-10-28 Lars Windolf <[email protected]> Version 1.9.7 * Added new preference for default viewing mode. * Changing toolbar button order to prevent accidental clicks on "Mark All Read" when clicking on more frequent buttons like "Next Unread". * Added Google Chrome as a browser choice to preferences. * Roughly reordered browser choices after browser market share. * Removed shading behaviour for unread items in combined view as it doesn't match GTK theming well * Removed auto-hide Javascript menu from combined view to simplify rendering in 3-pane modes. * Fixes items not removed from search folder count when feed is removed. * Fixes search folder rebuilding (do not include comment items). * Fixes SELECT offset handling when rebuilding search folders. * Now gives feedback when rebuilding search folders in feed list. * Update of German translation 2012-10-09 Lars Windolf <[email protected]> Version 1.9.6 * Removed "pass URL" check box from MIME type dialog. * Removed "Save In" entry from "Download" tab in preferences. * Removed "curl" choice in download tool preferences. * Removed "wget" choice in download tool preferences. * Added "steadyflow" choice in download tool preferences. * Patch SF #3569056: Use symbolic close buttons and spacing on tabs like gedit (Sebastian Keller) * Fixes reloading item when browsing the web inside the item view. * Fixes preferences dialog not opening up a second time. * Fixes padding/alignments in preferences dialog. * Fixes SF #1418701: Remote server pounded into dirt on auto-download (reported by anonymous) * Fixes SF #3567827: Double border around webview (reported by borschty) * Fixes SF #3572660: crash in google_source_remove_node (reported by Yanko Kaneti) * Prevents adding folders/search folders/newsbins to Google Reader * Prevents sorting subscriptions in Google Reader * Updated Polish translation (Wojciech Myrda) 2012-09-14 Lars Windolf <[email protected]> Version 1.9.5 * GIR dependencies are now mandatory * Migration to XDG directory layout in $HOME * Migrate from X session manager to GtkApplication * Raising GTK dependency to 3.4 for GtkApplication * Storing last window state in GConf now instead in the session command * Added Instapaper.com to social bookmarking sites (SF #3564393) (patch by prurigro) * Use hint label for manual browser command preference (SF #3129429) (patch by Fred Morcos) * Fixes comments_deinit() never being called * Fixes search folder counter update on feed removal * Fixes SF #3567715: Crash on network online status changes (patch by Yanko Kaneti) 2012-08-24 Lars Windolf <[email protected]> Version 1.9.4 * Changes (c) name "Lars Lindner" -> "Lars Windolf" due to marriage * Removed compilation support for GTK2 * Added GIR plugin system with libpeas * Added GnomeKeyring plugin that stores password in a keyring instead of in the exported OPML. * Added simple media player plugin to play audio and video enclosures. * Only present enclosures of audio and video MIME type * Raise libindicate minimum dependency to 0.6 * Patch SF #3515882: Also support libindicate 0.7 (Chow Loong Jin) * Dropping SIGSEGV signal handler to allow distro crash report tools to work (as found in Ubuntu) * Ensure node ids are in DB node relation on startup. * Adding AM_PROG_AR to configure.ac to work with automake 1.12 * Moved tab close button from the URL bar to the right of the tab label. * Smarter browser toolbar: appears now also in the item view when browsing external content. * Don't ask for Google Reader authentication more than three times with auto-update to avoid annoying the user. * Fixes SF Trac #10: Crash on empty search folders within folders (reported by phyxi) * Fixes SF Trac #19: Auto-load-link doesn't work with feeds with comments (reported by wonk0) * Fixes SF #2855990: Crash when dragging Google Reader feeds outside Google Reader. This is now prevented. (reported by algnod) * Fixes SF #3515880: missing include when compiling with libindicate (patch by Chow Loong Jin) * Fixes search folders being invisible in reduced mode. * Fixes ever growing temporary DB files. (patch by Sven Hartge) * Fixes visibility of enclosure list view for Ubuntu. * Fixes crashes on enclosure list context menu. * Fixes SF #3557513: Fixes crash on empty links in auto-load-link mode. (patch by msquared84) * Fixes unknown metadata types reported in trace when loading Google Reader subscriptions from DB. 2012-03-30 Lars Lindner <[email protected]> Version 1.9.3 * Added a new item history feature that allows navigating through recently viewed items. * Added new "Fullscreen" toggle menu option. * For GTK+3: request dark theme variant for better contrast between GUI and content. (Jeff Fortin) * Change schema defaults for folder display. Now unread items are loaded per-default when clicking a folder. * Patch SF #3473743: GTK2 dependency has to be 2.24 (bento) * Improve DB item counting statements. (patch by Regis Floret) * Change OpenStreetMap rendering from osmarender to mapnik. (patch by Mikel Olasagasti) * Patch SF #3127016: Automatic scrollbars on enclosure actions view (patch by Fred Morcos) * SF Trac #7: Removing icon from "Cancel All" in update dialog so that .gtkrc "gtk-button-images=0" does have correct effect. (reported by phixy) * Fixes SF #3480238: crashes when double clicking find (reported by joeserneem) * Fixes Debian #660602: Item pane may be reset during feed update (reported by Ben Hutchings) * Reimplemented search folder rule for item with enclosures. * Reimplemented search folder rule for item categories. * Reimplemented feed title matching rule for search folders. (patch by John Levon) * Updated Catalan translation (Gil Forcada) 2012-03-23 Lars Lindner <[email protected]> Version 1.9.2 * Fixes another migration issue left from 1.9.1 * Increasing sqlite3 dependency to 3.7+ for WAL journaling. * Removed sqliteasync code in favour of WAL journaling. This significantly improves performance for ext4. * Added indices for parent_item_id and parent_node_id to avoid slow item removal. (suggested by Paulo Anes) 2012-03-18 Lars Lindner <[email protected]> Version 1.9.1 * Disabled migration to ~/.liferea_1.9 * Revert ISO 8601 parsing using Glib due to Debian #653196 This fixes SF #3465106 (reported by Vincent Lefevre) * Fixes SF #3477582: welcome screen not using theme colors. (reported by stqn) * Do not update DB node and subscription info on startup for performance reasons. * Perform VACCUM only when page fragmentation ratio < 10%. (suggested by adriatic) * Removed tooltip on the "Next Unread Item" button to avoid having it flashing each time it is clicked when skimming through items. 2011-12-23 Lars Lindner <[email protected]> Version 1.9.0 * Add configure switch to compile against GTK2 or GTK3. (Emilio Pozuelo Monfort, Adrian Bunk) * Raise dependencies and updated code to compile against GTK3. (Emilio Pozuelo Monfort, Adrian Bunk) * Fixes proxy preference not affecting the HTML widget. (reported by Chris Siebenmann) * Fixes SF #3363481: Feeds fail to update properly when entries ordered "wrong" (patch by Robert Trace) * Fixes writing subscriptions into DB when importing from OPML (reported by Dennis Nezic)

* 0.7.0 * * Refactor build of FreeTDS & Iconv recipes. Add OpenSSL. Merged #207. * Ensure zero terminated strings, where C-str pointers are expected. Use StringValueCStr() Fixes #208. * Revert 999fa571 so timeouts do not kill the client. Fixes #179. * Remove `sspi_w_kerberos.diff` patch. Not needed anymore. * Tested again on Azure. Added notes to README on recommended settings. * Replace `rb_thread_blocking_region` (removed in Ruby 2.2.0) w/`rb_thread_call_without_gvl`. Fixes #182. * Remove 30 char password warning. Fixes #172. * Remove Ruby 1.8.6 support. We always use Time vs edge case DateTime.

Ok MAINTAINER bsiegert. While doing that, update to current release, 0.29.0. Changes since 0.24.0: Version 0.29.0 -------------- Compatibility notes: - when upgrading to 0.29.0 you need to upgrade client as well as server installations due to the locking and commandline interface changes otherwise you'll get an error msg about a RPC protocol mismatch or a wrong commandline option. if you run a server that needs to support both old and new clients, it is suggested that you have a "borg-0.28.2" and a "borg-0.29.0" command. clients then can choose via e.g. "borg --remote-path=borg-0.29.0 ...". - the default waiting time for a lock changed from infinity to 1 second for a better interactive user experience. if the repo you want to access is currently locked, borg will now terminate after 1s with an error message. if you have scripts that shall wait for the lock for a longer time, use --lock-wait N (with N being the maximum wait time in seconds). Bug fixes: - hash table tuning (better chosen hashtable load factor 0.75 and prime initial size of 1031 gave ~1000x speedup in some scenarios) - avoid creation of an orphan lock for one case, #285 - --keep-tag-files: fix file mode and multiple tag files in one directory, #432 - fixes for "borg upgrade" (attic repo converter), #466 - remove --progress isatty magic (and also --no-progress option) again, #476 - borg init: display proper repo URL - fix format of umask in help pages, #463 New features: - implement --lock-wait, support timeout for UpgradableLock, #210 - implement borg break-lock command, #157 - include system info below traceback, #324 - sane remote logging, remote stderr, #461: - remote log output: intercept it and log it via local logging system, with "Remote: " prefixed to message. log remote tracebacks. - remote stderr: output it to local stderr with "Remote: " prefixed. - add --debug and --info (same as --verbose) to set the log level of the builtin logging configuration (which otherwise defaults to warning), #426 note: there are few messages emitted at DEBUG level currently. - optionally configure logging via env var BORG_LOGGING_CONF - add --filter option for status characters: e.g. to show only the added or modified files (and also errors), use "borg create -v --filter=AME ...". - more progress indicators, #394 - use ISO-8601 date and time format, #375 - "borg check --prefix" to restrict archive checking to that name prefix, #206 Other changes: - hashindex_add C implementation (speed up cache re-sync for new archives) - increase FUSE read_size to 1024 (speed up metadata operations) - check/delete/prune --save-space: free unused segments quickly, #239 - increase rpc protocol version to 2 (see also Compatibility notes), #458 - silence borg by default (via default log level WARNING) - get rid of C compiler warnings, #391 - upgrade OS X FUSE to 3.0.9 on the OS X binary build system - use python 3.5.1 to build binaries - docs: - new mailing list [email protected], #468 - readthedocs: color and logo improvements - load coverage icons over SSL (avoids mixed content) - more precise binary installation steps - update release procedure docs about OS X FUSE - FAQ entry about unexpected 'A' status for unchanged file(s), #403 - add docs about 'E' file status - add "borg upgrade" docs, #464 - add developer docs about output and logging - clarify encryption, add note about client-side encryption - add resources section, with videos, talks, presentations, #149 - Borg moved to Arch Linux [community] - fix wrong installation instructions for archlinux Version 0.28.2 -------------- New features: - borg create --exclude-if-present TAGFILE - exclude directories that have the given file from the backup. You can additionally give --keep-tag-files to preserve just the directory roots and the tag-files (but not backup other directory contents), #395, attic #128, attic #142 Other changes: - do not create docs sources at build time (just have them in the repo), completely remove have_cython() hack, do not use the "mock" library at build time, #384 - avoid hidden import, make it easier for PyInstaller, easier fix for #218 - docs: - add description of item flags / status output, fixes #402 - explain how to regenerate usage and API files (build_api or build_usage) and when to commit usage files directly into git, #384 - minor install docs improvements Version 0.28.1 -------------- Bug fixes: - do not try to build api / usage docs for production install, fixes unexpected "mock" build dependency, #384 Other changes: - avoid using msgpack.packb at import time - fix formatting issue in changes.rst - fix build on readthedocs Version 0.28.0 -------------- Compatibility notes: - changed return codes (exit codes), see docs. in short: old: 0 = ok, 1 = error. now: 0 = ok, 1 = warning, 2 = error New features: - refactor return codes (exit codes), fixes #61 - add --show-rc option enable "terminating with X status, rc N" output, fixes 58, #351 - borg create backups atime and ctime additionally to mtime, fixes #317 - extract: support atime additionally to mtime - FUSE: support ctime and atime additionally to mtime - support borg --version - emit a warning if we have a slow msgpack installed - borg list --prefix=thishostname- REPO, fixes #205 - Debug commands (do not use except if you know what you do: debug-get-obj, debug-put-obj, debug-delete-obj, debug-dump-archive-items. Bug fixes: - setup.py: fix bug related to BORG_LZ4_PREFIX processing - fix "check" for repos that have incomplete chunks, fixes #364 - borg mount: fix unlocking of repository at umount time, fixes #331 - fix reading files without touching their atime, #334 - non-ascii ACL fixes for Linux, FreeBSD and OS X, #277 - fix acl_use_local_uid_gid() and add a test for it, attic #359 - borg upgrade: do not upgrade repositories in place by default, #299 - fix cascading failure with the index conversion code, #269 - borg check: implement 'cmdline' archive metadata value decoding, #311 - fix RobustUnpacker, it missed some metadata keys (new atime and ctime keys were missing, but also bsdflags). add check for unknown metadata keys. - create from stdin: also save atime, ctime (cosmetic) - use default_notty=False for confirmations, fixes #345 - vagrant: fix msgpack installation on centos, fixes #342 - deal with unicode errors for symlinks in same way as for regular files and have a helpful warning message about how to fix wrong locale setup, fixes #382 - add ACL keys the RobustUnpacker must know about Other changes: - improve file size displays, more flexible size formatters - explicitly commit to the units standard, #289 - archiver: add E status (means that an error occured when processing this (single) item - do binary releases via "github releases", closes #214 - create: use -x and --one-file-system (was: --do-not-cross-mountpoints), #296 - a lot of changes related to using "logging" module and screen output, #233 - show progress display if on a tty, output more progress information, #303 - factor out status output so it is consistent, fix surrogates removal, maybe fixes #309 - move away from RawConfigParser to ConfigParser - archive checker: better error logging, give chunk_id and sequence numbers (can be used together with borg debug-dump-archive-items). - do not mention the deprecated passphrase mode - emit a deprecation warning for --compression N (giving a just a number) - misc .coverragerc fixes (and coverage measurement improvements), fixes #319 - refactor confirmation code, reduce code duplication, add tests - prettier error messages, fixes #307, #57 - tests: - add a test to find disk-full issues, #327 - travis: also run tests on Python 3.5 - travis: use tox -r so it rebuilds the tox environments - test the generated pyinstaller-based binary by archiver unit tests, #215 - vagrant: tests: announce whether fakeroot is used or not - vagrant: add vagrant user to fuse group for debianoid systems also - vagrant: llfuse install on darwin needs pkgconfig installed - vagrant: use pyinstaller from develop branch, fixes #336 - benchmarks: test create, extract, list, delete, info, check, help, fixes #146 - benchmarks: test with both the binary and the python code - archiver tests: test with both the binary and the python code, fixes #215 - make basic test more robust - docs: - moved docs to borgbackup.readthedocs.org, #155 - a lot of fixes and improvements, use mobile-friendly RTD standard theme - use zlib,6 compression in some examples, fixes #275 - add missing rename usage to docs, closes #279 - include the help offered by borg help <topic> in the usage docs, fixes #293 - include a list of major changes compared to attic into README, fixes #224 - add OS X install instructions, #197 - more details about the release process, #260 - fix linux glibc requirement (binaries built on debian7 now) - build: move usage and API generation to setup.py - update docs about return codes, #61 - remove api docs (too much breakage on rtd) - borgbackup install + basics presentation (asciinema) - describe the current style guide in documentation - add section about debug commands - warn about not running out of space - add example for rename - improve chunker params docs, fixes #362 - minor development docs update Version 0.27.0 -------------- New features: - "borg upgrade" command - attic -> borg one time converter / migration, #21 - temporary hack to avoid using lots of disk space for chunks.archive.d, #235: To use it: rm -rf chunks.archive.d ; touch chunks.archive.d - respect XDG_CACHE_HOME, attic #181 - add support for arbitrary SSH commands, attic #99 - borg delete --cache-only REPO (only delete cache, not REPO), attic #123 Bug fixes: - use Debian 7 (wheezy) to build pyinstaller borgbackup binaries, fixes slow down observed when running the Centos6-built binary on Ubuntu, #222 - do not crash on empty lock.roster, fixes #232 - fix multiple issues with the cache config version check, #234 - fix segment entry header size check, attic #352 plus other error handling improvements / code deduplication there. - always give segment and offset in repo IntegrityErrors Other changes: - stop producing binary wheels, remove docs about it, #147 - docs: - add warning about prune - generate usage include files only as needed - development docs: add Vagrant section - update / improve / reformat FAQ - hint to single-file pyinstaller binaries from README Version 0.26.1 -------------- This is a minor update, just docs and new pyinstaller binaries. - docs update about python and binary requirements - better docs for --read-special, fix #220 - re-built the binaries, fix #218 and #213 (glibc version issue) - update web site about single-file pyinstaller binaries Note: if you did a python-based installation, there is no need to upgrade. Version 0.26.0 -------------- New features: - Faster cache sync (do all in one pass, remove tar/compression stuff), #163 - BORG_REPO env var to specify the default repo, #168 - read special files as if they were regular files, #79 - implement borg create --dry-run, attic issue #267 - Normalize paths before pattern matching on OS X, #143 - support OpenBSD and NetBSD (except xattrs/ACLs) - support / run tests on Python 3.5 Bug fixes: - borg mount repo: use absolute path, attic #200, attic #137 - chunker: use off_t to get 64bit on 32bit platform, #178 - initialize chunker fd to -1, so it's not equal to STDIN_FILENO (0) - fix reaction to "no" answer at delete repo prompt, #182 - setup.py: detect lz4.h header file location - to support python < 3.2.4, add less buggy argparse lib from 3.2.6 (#194) - fix for obtaining ``char *`` from temporary Python value (old code causes a compile error on Mint 17.2) - llfuse 0.41 install troubles on some platforms, require < 0.41 (UnicodeDecodeError exception due to non-ascii llfuse setup.py) - cython code: add some int types to get rid of unspecific python add / subtract operations (avoid ``undefined symbol FPE_``... error on some platforms) - fix verbose mode display of stdin backup - extract: warn if a include pattern never matched, fixes #209, implement counters for Include/ExcludePatterns - archive names with slashes are invalid, attic issue #180 - chunker: add a check whether the POSIX_FADV_DONTNEED constant is defined - fixes building on OpenBSD. Other changes: - detect inconsistency / corruption / hash collision, #170 - replace versioneer with setuptools_scm, #106 - docs: - pkg-config is needed for llfuse installation - be more clear about pruning, attic issue #132 - unit tests: - xattr: ignore security.selinux attribute showing up - ext3 seems to need a bit more space for a sparse file - do not test lzma level 9 compression (avoid MemoryError) - work around strange mtime granularity issue on netbsd, fixes #204 - ignore st_rdev if file is not a block/char device, fixes #203 - stay away from the setgid and sticky mode bits - use Vagrant to do easy cross-platform testing (#196), currently: - Debian 7 "wheezy" 32bit, Debian 8 "jessie" 64bit - Ubuntu 12.04 32bit, Ubuntu 14.04 64bit - Centos 7 64bit - FreeBSD 10.2 64bit - OpenBSD 5.7 64bit - NetBSD 6.1.5 64bit - Darwin (OS X Yosemite) Version 0.25.0 -------------- Compatibility notes: - lz4 compression library (liblz4) is a new requirement (#156) - the new compression code is very compatible: as long as you stay with zlib compression, older borg releases will still be able to read data from a repo/archive made with the new code (note: this is not the case for the default "none" compression, use "zlib,0" if you want a "no compression" mode that can be read by older borg). Also the new code is able to read repos and archives made with older borg versions (for all zlib levels 0..9). Deprecations: - --compression N (with N being a number, as in 0.24) is deprecated. We keep the --compression 0..9 for now to not break scripts, but it is deprecated and will be removed later, so better fix your scripts now: --compression 0 (as in 0.24) is the same as --compression zlib,0 (now). BUT: if you do not want compression, you rather want --compression none (which is the default). --compression 1 (in 0.24) is the same as --compression zlib,1 (now) --compression 9 (in 0.24) is the same as --compression zlib,9 (now) New features: - create --compression none (default, means: do not compress, just pass through data "as is". this is more efficient than zlib level 0 as used in borg 0.24) - create --compression lz4 (super-fast, but not very high compression) - create --compression zlib,N (slower, higher compression, default for N is 6) - create --compression lzma,N (slowest, highest compression, default N is 6) - honor the nodump flag (UF_NODUMP) and do not backup such items - list --short just outputs a simple list of the files/directories in an archive Bug fixes: - fixed --chunker-params parameter order confusion / malfunction, fixes #154 - close fds of segments we delete (during compaction) - close files which fell out the lrucache - fadvise DONTNEED now is only called for the byte range actually read, not for the whole file, fixes #158. - fix issue with negative "all archives" size, fixes #165 - restore_xattrs: ignore if setxattr fails with EACCES, fixes #162 Other changes: - remove fakeroot requirement for tests, tests run faster without fakeroot (test setup does not fail any more without fakeroot, so you can run with or without fakeroot), fixes #151 and #91. - more tests for archiver - recover_segment(): don't assume we have an fd for segment - lrucache refactoring / cleanup, add dispose function, py.test tests - generalize hashindex code for any key length (less hardcoding) - lock roster: catch file not found in remove() method and ignore it - travis CI: use requirements file - improved docs: - replace hack for llfuse with proper solution (install libfuse-dev) - update docs about compression - update development docs about fakeroot - internals: add some words about lock files / locking system - support: mention BountySource and for what it can be used - theme: use a lighter green - add pypi, wheel, dist package based install docs - split install docs into system-specific preparations and generic instructions

pkgsrc changes: o Update MASTER_SITES and HOMEPAGE (libproxy migrated to GitHub) o Delete patches/patch-libproxy_modules_config__macosx.cpp, now present in the stable release. Changes: New in version 0.4.12 ============================== * Move development to github.com/libproxy/libproxy * Fix fd leak in get_pac (Bug #185) * Detect running MATE session (Bug #186, Part1). * Fix linking of perl bindings to pthread (Bug #182) * Correctly detect spidermonky (mozjs185) (Bug #188) * Stop pxgsettings from segfaulting on exit (Bug #192) * Fix test #10 (Bug #189) * Fix build on Mac OS X (Bug #183) * Add a generic KDE Config module (fix crashes of Qt5 based apps) (issue#4)

--------------------- v1.5.0 Release to support oauth2client >= 2.0.0. - Fix file stream recognition in Python 3 (#141) - Fix non-resumable binary uploads in Python 3 (#147) - Default to 'octet-stream' if mimetype detection fails (#157) - Handle SSL errors with retries (#160) - Fix incompatibility with oauth2client v2.0.0 (#182)

@nbecker

Fix CPU detection patch while here. Changes from 2.5.2 to 2.6.0 =========================== - Introduced a new re_evaluate() function for re-evaluating the previous executed array expression without any check. This is meant for accelerating loops that are re-evaluating the same expression repeatedly without changing anything else than the operands. If unsure, use evaluate() which is safer. - The BLOCK_SIZE1 and BLOCK_SIZE2 constants have been re-checked in order to find a value maximizing most of the benchmarks in bench/ directory. The new values (8192 and 16 respectively) give somewhat better results (~5%) overall. The CPU used for fine tuning is a relatively new Haswell processor (E3-1240 v3). - The '--name' flag for `setup.py` returning the name of the package is honored now (issue #215). Changes from 2.5.1 to 2.5.2 =========================== - conj() and abs() actually added as VML-powered functions, preventing the same problems than log10() before (PR #212). Thanks to Tom Kooij for the fix! Changes from 2.5 to 2.5.1 ========================= - Fix for log10() and conj() functions. These produced wrong results when numexpr was compiled with Intel's MKL (which is a popular build since Anaconda ships it by default) and non-contiguous data (issue #210). Thanks to Arne de Laat and Tom Kooij for reporting and providing a nice test unit. - Fix that allows numexpr-powered apps to be profiled with pympler. Thanks to @nbecker. Changes from 2.4.6 to 2.5 ========================= - Added locking for allowing the use of numexpr in multi-threaded callers (this does not prevent numexpr to use multiple cores simultaneously). (PR #199, Antoine Pitrou, PR #200, Jenn Olsen). - Added new min() and max() functions (PR #195, CJ Carey). Changes from 2.4.5 to 2.4.6 =========================== - Fixed some UserWarnings in Solaris (PR #189, Graham Jones). - Better handling of MSVC defines. (#168, Francesc Alted). Changes from 2.4.4 to 2.4.5 =========================== - Undone a 'fix' for a harmless data race. (#185 Benedikt Reinartz, Francesc Alted). - Ignore NumPy warnings (overflow/underflow, divide by zero and others) that only show up in Python3. Masking these warnings in tests is fine because all the results are checked to be valid. (#183, Francesc Alted). Changes from 2.4.3 to 2.4.4 =========================== - Fix bad #ifdef for including stdint on Windows (PR #186, Mike Sarahan). Changes from 2.4.3 to 2.4.4 =========================== * Honor OMP_NUM_THREADS as a fallback in case NUMEXPR_NUM_THREADS is not set. Fixes #161. (PR #175, Stefan Erb). * Added support for AppVeyor (PR #178 Andrea Bedini) * Fix to allow numexpr to be imported after eventlet.monkey_patch(), as suggested in #118 (PR #180 Ben Moran). * Fix harmless data race that triggers false positives in ThreadSanitizer. (PR #179, Clement Courbet). * Fixed some string tests on Python 3 (PR #182, Antonio Valentino). Changes from 2.4.2 to 2.4.3 =========================== * Comparisons with empty strings work correctly now. Fixes #121 and PyTables #184. Changes from 2.4.1 to 2.4.2 =========================== * Improved setup.py so that pip can query the name and version without actually doing the installation. Thanks to Joris Borgdorff. Changes from 2.4 to 2.4.1 ========================= * Added more configuration examples for compiling with MKL/VML support. Thanks to Davide Del Vento. * Symbol MKL_VML changed into MKL_DOMAIN_VML because the former is deprecated in newer MKL. Thanks to Nick Papior Andersen. * Better determination of methods in `cpuinfo` module. Thanks to Marc Jofre. * Improved NumPy version determination (handy for 1.10.0). Thanks to Åsmund Hjulstad. * Benchmarks run now with both Python 2 and Python 3. Thanks to Zoran Plesivčak. Changes from 2.3.1 to 2.4 ========================= * A new `contains()` function has been added for detecting substrings in strings. Only plain strings (bytes) are supported for now. See PR #135 and ticket #142. Thanks to Marcin Krol. * New version of setup.py that allows better management of NumPy dependency. See PR #133. Thanks to Aleks Bunin. Changes from 2.3 to 2.3.1 ========================= * Added support for shift-left (<<) and shift-right (>>) binary operators. See PR #131. Thanks to fish2000! * Removed the rpath flag for the GCC linker, because it is probably not necessary and it chokes to clang.

pkgsrc changes: - set license - revamp build definitions - revamp blk3.mk and bump API_DEPENDS to 0.13 (recent software depends on new ode-config) - drop all local patches as not needed upstream changes: Changes for 0.13 New features: Stable, implicit gyroscopic forces (patch #185 by Joseph Cooper). Bodies with gyroscopic forces won't gain energy anymore. New joint: transmission joint (patch #182 by Dimitris Papavasiliou). Contacts now have rolling friction (patch #184 by Joseph Cooper). Removed the need for defining dSINGLE/dDOUBLE; this is stored now in the generated ode/precision.h header. New joint: Double Ball (AKA "distance joint"). New joint: Double Hinge. Threaded execution support interface added. Optional built-in threading implementation added. Internal threading implementation is excluded by default and to be used, it must be enabled with configure/premake: --disable-threading-intf (--no-threading-intf for Windows/Premake). This allows disabling threading interface support. Bug fixes Joint feedback forces application fixed in QuickStep implementation Bug #89 by Luc: (dJointAddSliderForce() adds a zero force when the parent body is NULL) Bug #88 by Luc: heightfield data assigned to a wrong field in dGeomHeightfieldSetHeightfieldData Fixed cylinder AABB computation. Removed ALLOCA calls from dHashSpace; it should not depend on stack size limits anymore. Bugs in AMotor joint (patch #181) Bugs in PU joint (patch #186) Fixed issue with friction and non-friction constraints being intermixed during constraints random reordering in QuickStep. Fixed matrix inversion bug (patch #183). Fixed issue with some kinds of joints (Ball, DBall, DHinge, Fixed) might overwrite world ERP value with their custom ERP during getInfo2() call and that inappropriate value would then be passed to subsequent joints in solver instead of world ERP. Fixed issues reported in patches #151 and #22 (collisions with SAPSpace and QuadTreeSpace might not work because geometries list was misused in them). Fixed IsPointInPolygon in convex.cpp (patch #160 by Janis Rucis) Fixed zero comparisons in OPCODE to use relative error instead of absolute epsilon value (found by Bill Sellers) Fixed dhinge's last constraint to properly handle rotations. Fixed plane2d joint: uninitialized variables (reported by Dimitris Papavasiliou) Bug #80 by Georg Martius: better handling of capsule-box with deep penetrations. Fixed zero-mu issues: now either mu or mu2 can be set to zero. Other changes Public headers cleaned to cause less pollution of typedefs and macros. Changes for 0.12 Added python bindings, contributed by Gideon Klompje. Integrated libccd from Daniel Fiser, provides new colliders based on GJK, EPA and MPR. Now cylinders can collide with cylinders! New functions have been added: dWorldUseSharedWorkingMemory() dWorldCleanupWorkingMemory() dWorldSetStepMemoryReservationPolicy() dWorldSetStepMemoryManager() dGeomLowLevelControl(): change/query OPCODE trimesh-sphere contact merging behavior at runtime. dGeomGetRelPointPos() (patch #2991622) dGeomGetPosRelPoint() (patch #2991622) dGeomVectorToWorld() (patch #2991622) dGeomVectorFromWorld() (patch #2991622) dWorldStepFast1 API removed along with dWorld[Get/Set]AutoEnableDepthSF1 dWorldStep() and dWorldQuickStep() have been changed to return boolean success status, and avoid allocation on stack. dInitODE2() changed to automatically call AllocateODEDataForThread(dAllocateFlagBasicData) after library initialization. Made sure neither dSINGLE or dDOUBLE is defined by default; the user should always explicitly specify the precision. Fixed a bug in dGeomCopyOffsetRotation(). Macros changed to static inline functions in odemath.h and related files. Improvement for trimesh-plane collision. odecpp classes changed to be inheritable and easily expandable QuadTreeSpace implementation corrected to avoid object-block relation ambiguity due to numeric errors. Fixed bug affecting disabled joints and dWorldStep. Added extern "C" wrapper to dWorldExportDIF(). Fixed bug #2937076: don't try to build demos if drawstuff is disabled. Applied patch #2931174 to make demos work for recent MacOS. Applied patch #2931177 to fix the demos' framerate on X11. Applied patch #2995450 to generate up to four contacts for box-plane collision test and fix contact depths. Applied patch #3030783 to fix drawstuff dimensions being ignored in OSX GLUT port. Applied patch #3429454: fix compilation on some platforms. Heightfield zone boundaries calculation code fixed to also consider whole next cell after the AABB if the AABB ends exactly at the cell boundary. New demo: demo_tracks. Fixed a box-capsule bug: more reasonable normal for deep penetrations. Many internal fixes to world stepping and collision detection code. Changes for 0.11.1 Made the new trimesh collider the default. Added a "-texturepath" option to drawstuff. Heightfield rotation fixed to avoid NaNs while rotating infinite MIN/MAX heights. Incorrect parameter order fixed on contact merging in Sphere-Trimesh collisions. Fixed bug #2685170: use the C99 __func__ instead of __FUNCTION__ when a C99 implementation is available. Remove unused code in demo_joints.cpp. Fix bug in collision categories in demo_jointPU. Added a possibility to initialize/close ODE multiple times recursively has been added. Also, now a call to dSpaceSetManualCleanup() is required for each space right after creation if ODE has been initialized in thread data manual cleanup mode. Thread local data has been cleaned up from OPCODE and OdeTls. New house of cards demo, which stresses the friction handling stability. Changes for 0.11 This release contains many joint-related bug fixes, and some new features like kinematic bodies, better convex-convex collision detection and some extra functions. Fix bug: Fix problem when attaching no body to a joint. Fix problem with dJointGetUniversalAngle2 when the joint is attached to only a body 2. The sign was inverted. Fix bug reported by Tilman: dxJointPU::getInfo1 was setting twice the limit of limot1 to zero and not limot2. Fixed a bug in dSpaceCollide2: if both geoms are not in spaces they would not have valid AABBs. Swapped geometries returned in contacts for OPCODE Trimesh-Plane collisions as they were returned in unnatural order being different from that in GIMPACT Fixed an inverted sign problem on positions of joints PU and PR. Fix bug: when a slider, piston, pu or pr joint had only one body attached to position 2, dJointAttach(jId, 0, bId). The body was not push in the right direction to move back between the limits. Fix bug in dJointGetPUAxis2: the axis was not multiplied with the the rotation matrix of the good body. Fix bug if there is only one body on the PU joint the axis returned was not the right one. New functions: dJointSetUniversalAxis1Offset and dJointSetUniversalAxis2Offset. New functions: dJointEnable, dJointDisable, dJointIsEnabled (patch #2454764). New functions: dGeomTriMeshSetTriMergeCallback/dGeomTriMeshGetTriMergeCallback. New function: void dJointSetPUAnchorOffset (deprecating dJointSetPUAnchorDelta). New functions: dJointGetPRAngle and dJointGetPRAngleRate. New functions: dBodyGetGyroscopicMode and dBodySetGyroscopicMode (patch #2019242). Applied patch #2538046: Heightfield AABB bounds patch. Applied patch #2381592, which adds support for Kinematic Bodies. Applied a patch to make GIMPACT trimesh-ray collisions to be consistent with those in OPCODE (bug #2214623). Applied a patch to make side1, side2 fields of contact structure be always initialized. Applied patch #2158425: This patch enable GIMPACT to work on 64-bit machine. Applied patch #2080674: Improved dBodySetRotation; now exact rotation matrices are preserved until the next simulation step. Enable the motor on the rotoide part of the PR joint. Added Blender script to create ODE convex geoms under tools. Convex-Convex collision detection code is finally (nearly) stable. Changes for 0.10.1 This is a bugfix release, so you shouldn't expect anything to stop working from 0.10. New function: dJointSetPistonAnchorOffset Add new function dJointSetHingeAxisDelta Fix problem with dJointGetPistonPosition and dJointGetPistonPositionRate when the joint is attached to only a body 2. The sign was inversed. Update the slider joint to have the same behavior as the other joint when there is only a body2 attached to it. Rename the new function dJointSetHingeAxisDelta to dJointSetHingeAxisOffset. This will remove confusion with the old function dJointSetHingeAnchorDelta. Bug fix: Max Correcting Vel behavior is now the same as before 0.10. Changes for 0.10 New functions: dInitODE2(), dAllocateODEDataForThread(), dCleanupODEAllDataForThread(). This adds support for ability to run collision detection from multiple threads for separate spaces. New functions: dCheckConfiguration(), dGetConfiguration(), to test how ODE was compiled. New function: dJointGetNumBodies (patch #1901550). New function: dSpaceGetClass (patch #1901637). New function: dSetColliderOverride(), to register custom collision handling functions. Added damping and MaxAngularVel() functions. Applied patch #1335202: Contact Joint Motion (see demo_motion.cpp). Applied patch #1851394: support for GIMPACT with double precision, dCollide fix. Applied patch #1813079 (moved callback). Added possibility to collide a space of lower sublevel as a geometry against another space of a higher level with dSpaceCollide2. dSpaceSetSublevel/dSpaceGetSublevel are used for sublevel assignment/retrieval. Fixed a bug in dJointXXXGetInfo. The value in limot.limit was not always updated. (Ex: If hi and lo limit were changed). New Joint: Prismatic Universal (patch #1828454). New Joint: Piston, with demo. Disabled building shared library by default with autotools. ODE shouldn't be installed as a system library. Fixed drawstuff build issues on OSX. Removed release and debug flags for configure.in: CPPFLAGS, CFLAGS, CXXFLAGS should be set by the user to their liking, respecting autotools policies. Added 'Sweep and Prune' collision space. Optimizations, many bug fixes, and code cleanup. Changes from 0.8 to 0.9 New Feature: CONTACTS_UNIMPORTANT flag added for dCollide() to allow canceling any contact improvements and return any contacts found as soon as possible New feature: Add erp/cfm parameters to fixed and ball joint. SF PATCH 1478244 Assert on zero normalizations, add dSafeNormalize. Added boolean result for dNormalize3() and dNormalize4() so that normalization success could be checked SF Patch 1808007: fix gimpact compiler warning Apply SF patch 1800579: dGeomTriMeshSetData does not work with GIMPACT Fix: heightfield collision could return less contacts than was possible Fix: the deepest contact might be not selected if there was a lack of contact slots in trimesh-trimesh and trimesh-box cases (function exited immediately and did not check for possible contact coincidences). Improvement: optimizations for GIMPACT versions of trimesh-capsule, trimesh-trimesh, trimesh-plane, trimesh-sphere Improvement: dCollideConvexPlane optimized Fix: cylinder-box collision did not respect requested contact count limit Fix SF issue 1729096 by adding dMassSetTrimeshTotal Apply SF patch 1685107: Enforce 1 contact request Apply SF Patch 1697014: Update JointPR code Catch SF BUG 1621938: gimpact only does stride 12. patch 1769851 by Jon Watte: recalc aabb when new setting new data Added Richard Barrington's model loader for XNA (to be used with ODE.NET) 1586733 collision_trimesh_trimesh.cpp OPCODE fix Added Francisco Leon's alternate trimesh-trimesh collider. 1691402 Heighfield performance patch patch 1696933 Fix bug in dWorldExportDIF when joint in "limbo" Renamed "tests" to "demos" and split out unit test project. Updated premake scripts and Visual Studio files; automake files still need to be updated. Make building demos optional. SF patch 1650563 lib64 fixes, SF patch 1646598 Warn against using double precision with gimpact Many more bug fixes and optimizations. Changes from 0.7 to 0.8 New Rotoide - Prismatic Joint Optimisation when dGYROSCOPIC is disabled (default) dJointGetUniversalAngles to efficiently get both angles at once. Changes from 0.6 to 0.7 New heightfield primitive for terrains. Trimesh-Plane collision. Ray-Cylinder collision. Integration of the plane-2d joint. Improved support for convex hulls. Fix for joint limit handling. Half-space optimisation for axis aligned planes. Changes from 0.5 to 0.6 Added flat-capped cylinders. CCylinder has been renamed as Capsule. Added support for geom offsets. Improved stepping function (dWorldQuickStep) Much improved support for trimesh collision shapes Added support for 64-bit systems Started support for convex hulls New and improved build system Lots of bug fixes, stability, and performance improvements Geom Offset Overview Geom offsets allow geom objects to be offset from a body's position. This is useful for cases where an object has an offset centre of mass, or is made up out of several geoms each with their own local position. Native support for geom offsets means that the geomTransform container is now obselete. The real advantage over geomTransform is that there is a much easier interface for setting, getting, and modifying a geom's offset from its body. The elimination of geomTransform simplifies callbacks which no longer have to special case that geom class type. In terms of performance, the new code has a negligible performance difference and a memory improvement compared to using a geomTransform. Geom Offset and Bodies An offset only makes sense for geoms which are connected to bodies. It is an error to attempt to set an offset for a geom which is not connected to a body. When a geom is disconnected from a body, any offset will be automatically eliminated. Thus, the possible states a geom can be in are: Geom Geom on body Geom on body, with an offset To create an offset, just call on of the geomSetOffset functions. The offset will be automatically created if it does not yet exist. Geom offsets are normally set by specifying the offset in local coordinates. An extra set of functions are provided to allow an offset to be determined by providing world coordinates and subtracting them from the current body position. These second set of functions, geomSetOffsetWorldPosition(),etc, allow the user to essentially say "keep the body where it is, and move its geom to this position in the world". Geom Offset API This is defined in the doxygen documentation. Geom Offset affect on existing API The following functions have been updated such that they transparently work with offsets. void dGeomSetPosition (dGeomID, dReal x, dReal y, dReal z) void dGeomSetRotation (dGeomID, const dMatrix3 R) void dGeomSetQuaternion (dGeomID, const dQuaternion) const dReal * dGeomGetPosition (dGeomID) const dReal * dGeomGetRotation (dGeomID) void dGeomGetQuaternion (dGeomID, dQuaternion result) void dGeomGetAABB (dGeomID, dReal aabb[6]) The functions that get a geom's position will return its final position in world coordinates. If a geom is offset, it is no longer true that dGeomGetPosition()==dBodyGetPosition(). Instead, each will return its own world position, with the geom being offset from the body. The functions that set a geom's position will move the body to the position such that the geom will have the position passed in. So if the geom has a positional offset of (0,0,1), and we call dGeomSetPosition(g,10,10,10), the end result will be the body's position being set to (10,10,9). As such, either dGeomSetPosition or dBodySetPosition can be used, depending on which is more convenient. The other position is automatically updated. Geom Offset and geomTransform GeomTransforms are still supported, and all existing code transparently works. When writing new code, however, it is far easier to work with geoms and offsets. The change eliminates a large amount of special casing needed to do when working with geomTransforms. Setting an offset is trivial, and does not require inserting or removing new GeomTransforms from spaces. There is no need to special case getting an offset geom's world position, or setting an offset geom's world position. It is especially useful in the collide callback. The old way required getting the object as the real geom (but without being able to easily grab its Transform, or even its body!), or as its Transform (forcing special casing code to extract the real geom in that case).

@savraj

NEWS: Version 2.5.3 ------------- - Updated zoneinfo to 2016d - Fixed parser bug where unambiguous datetimes fail to parse when dayfirst is set to true. (gh issue #233, pr #234) - Bug in zoneinfo file on platforms such as Google App Engine which do not do not allow importing of subprocess.check_call was reported and fixed by @savraj (gh issue #239, gh pr #240) - Fixed incorrect version in documentation (gh issue #235, pr #243) Version 2.5.2 ------------- - Updated zoneinfo to 2016c - Fixed parser bug where yearfirst and dayfirst parameters were not being respected when no separator was present. (gh issue #81 and #217, pr #229) Version 2.5.1 ------------- - Updated zoneinfo to 2016b - Changed MANIFEST.in to explicitly include test suite in source distributions, with help from @koobs (gh issue #193, pr #194, #201, #221) - Explicitly set all line-endings to LF, except for the NEWS file, on a per-repository basis (gh pr #218) - Fixed an issue with improper caching behavior in rruleset objects (gh issue #104, pr #207) - Changed to an explicit error when rrulestr strings contain a missing BYDAY (gh issue #162, pr #211) - tzfile now correctly handles files containing leapcnt (although the leapcnt information is not actually used). Contributed by @hjoukl (gh issue #146, pr #147) - Fixed recursive import issue with tz module (gh pr #204) - Added compatibility between tzwin objects and datetime.time objects (gh issue #216, gh pr #219) - Refactored monolithic test suite by module (gh issue #61, pr #200 and #206) - Improved test coverage in the relativedelta module (gh pr #215) - Adjusted documentation to reflect possibly counter-intuitive properties of RFC-5545-compliant rrules, and other documentation improvements in the rrule module (gh issue #105, gh issue #149 - pointer to the solution by @phep, pr #213). Version 2.5.0 ------------- - Updated zoneinfo to 2016a - zoneinfo_metadata file version increased to 2.0 - the updated updatezinfo.py script will work with older zoneinfo_metadata.json files, but new metadata files will not work with older updatezinfo.py versions. Additionally, we have started hosting our own mirror of the Olson databases on a github pages site (https://dateutil.github.io/tzdata/) (gh pr #183) - dateutil zoneinfo tarballs now contain the full zoneinfo_metadata file used to generate them. (gh issue #27, gh pr #85) - relativedelta can now be safely subclassed without derived objects reverting to base relativedelta objects as a result of arithmetic operations. (lp:1010199, gh issue #44, pr #49) - relativedelta 'weeks' parameter can now be set and retrieved as a property of relativedelta instances. (lp: 727525, gh issue #45, pr #49) - relativedelta now explicitly supports fractional relative weeks, days, hours, minutes and seconds. Fractional values in absolute parameters (year, day, etc) are now deprecated. (gh issue #40, pr #190) - relativedelta objects previously did not use microseconds to determine of two relativedelta objects were equal. This oversight has been corrected. Contributed by @elprans (gh pr #113) - rrule now has an xafter() method for retrieving multiple recurrences after a specified date. (gh pr #38) - str(rrule) now returns an RFC2445-compliant rrule string, contributed by @schinckel and @armicron (lp:1406305, gh issue #47, prs #50, #62 and #160) - rrule performance under certain conditions has been significantly improved thanks to a patch contributed by @dekoza, based on an article by Brian Beck (@exogen) (gh pr #136) - The use of both the 'until' and 'count' parameters is now deprecated as inconsistent with RFC2445 (gh pr #62, #185) - Parsing an empty string will now raise a ValueError, rather than returning the datetime passed to the 'default' parameter. (gh issue #78, pr #187) - tzwinlocal objects now have a meaningful repr() and str() implementation (gh issue #148, prs #184 and #186) - Added equality logic for tzwin and tzwinlocal objects. (gh issue #151, pr #180, #184) - Added some flexibility in subclassing timelex, and switched the default behavior over to using string methods rather than comparing against a fixed list. (gh pr #122, #139) - An issue causing tzstr() to crash on Python 2.x was fixed. (lp: 1331576, gh issue #51, pr #55) - An issue with string encoding causing exceptions under certain circumstances when tzname() is called was fixed. (gh issue #60, #74, pr #75) - Parser issue where calling parse() on dates with no day specified when the day of the month in the default datetime (which is "today" if unspecified) is greater than the number of days in the parsed month was fixed (this issue tended to crop up between the 29th and 31st of the month, for obvious reasons) (canonical gh issue #25, pr #30, #191) - Fixed parser issue causing fuzzy_with_tokens to raise an unexpected exception in certain circumstances. Contributed by @MichaelAquilina (gh pr #91) - Fixed parser issue where years > 100 AD were incorrectly parsed. Contributed by @Bachmann1234 (gh pr #130) - Fixed parser issue where commas were not a valid separator between seconds and microseconds, preventing parsing of ISO 8601 dates. Contributed by @RyansS (gh issue #28, pr #106) - Fixed issue with tzwin encoding in locales with non-Latin alphabets (gh issue #92, pr #98) - Fixed an issue where tzwin was not being properly imported on Windows. Contributed by @labrys. (gh pr #134) - Fixed a problem causing issues importing zoneinfo in certain circumstances. Issue and solution contributed by @alexxv (gh issue #97, pr #99) - Fixed an issue where dateutil timezones were not compatible with basic time objects. One of many, many timezone related issues contributed and tested by @labrys. (gh issue #132, pr #181) - Fixed issue where tzwinlocal had an invalid utcoffset. (gh issue #135, pr #141, #142) - Fixed issue with tzwin and tzwinlocal where DST transitions were incorrectly parsed from the registry. (gh issue #143, pr #178) - updatezinfo.py no longer suppresses certain OSErrors. Contributed by @bjamesv (gh pr #164) - An issue that arose when timezone locale changes during runtime has been fixed by @carlosxl and @mjschultz (gh issue #100, prs #107, #109) - Python 3.5 was added to the supported platforms in the metadata (@tacaswell gh pr #159) and the test suites (@moreati gh pr #117). - An issue with tox failing without unittest2 installed in Python 2.6 was fixed by @moreati (gh pr #115) - Several deprecated functions were replaced in the tests by @moreati (gh pr #116) - Improved the logic in Travis and Appveyor to alleviate issues where builds were failing due to connection issues when downloading the IANA timezone files. In addition to adding our own mirror for the files (gh pr #183), the download is now retried a number of times (with a delay) (gh pr #177) - Many failing doctests were fixed by @moreati. (gh pr #120) - Many fixes to the documentation (gh pr #103, gh pr #87 from @radarhere, gh pr #154 from @gpoesia, gh pr #156 from @awsum, gh pr #168 from @ja8zyjits) - Added a code coverage tool to the CI to help improve the library. (gh pr #182) - We now have a mailing list - [email protected], graciously hosted by Python.org. Version 2.4.2 ------------- - Updated zoneinfo to 2015b. - Fixed issue with parsing of tzstr on Python 2.7.x; tzstr will now be decoded if not a unicode type. gh #51 (lp:1331576), gh pr #55. - Fix a parser issue where AM and PM tokens were showing up in fuzzy date stamps, triggering inappropriate errors. gh #56 (lp: 1428895), gh pr #63. - Missing function "setcachesize" removed from zoneinfo __all__ list by @RyansS, fixing an issue with wildcard imports of dateutil.zoneinfo. (gh pr #66). - (PyPi only) Fix an issue with source distributions not including the test suite. Version 2.4.1 ------------- - Added explicit check for valid hours if AM/PM is specified in parser. (gh pr #22, issue #21) - Fix bug in rrule introduced in 2.4.0 where byweekday parameter was not handled properly. (gh pr #35, issue #34) - Fix error where parser allowed some invalid dates, overwriting existing hours with the last 2-digit number in the string. (gh pr #32, issue #31) - Fix and add test for Python 2.x compatibility with boolean checking of relativedelta objects. Implemented by @nimasmi (gh pr #43) and Cédric Krier (lp: 1035038) - Replaced parse() calls with explicit datetime objects in unit tests unrelated to parser. (gh pr #36) - Changed private _byxxx from sets to sorted tuples and fixed one currently unreachable bug in _construct_byset. (gh pr #54) - Additional documentation for parser (gh pr #29, #33, #41) and rrule. - Formatting fixes to documentation of rrule and README.rst. - Updated zoneinfo to 2015a.

[v1.4.2][1.4.2] ------------------------------------------------------------------------- ### Fixed - A PEM-formatted key encoded as bytes could cause a `TypeError` to be raised [#213][213] [v1.4.1][1.4.1] ------------------------------------------------------------------------- ### Fixed - Newer versions of Pytest could not detect warnings properly [#182][182] - Non-string 'kid' value now raises `InvalidTokenError` [#174][174] - `jwt.decode(None)` now gracefully fails with `InvalidTokenError` [#183][183]

- Fix bug #181 ERR_RESPONSE_HEADERS with bypass - Fix bug #183 whitelist and identification - Fix bug #182 e2guardian systemd service does not support reload - Fix bug #178 (NTLM Messages)

Patch #328 - 2017/06/01 * revise parser for charClass resource, making these improvements: + accept octal and hexadecimal values + allow embedded whitespace + allow the class after colon to be optional, e.g., to clear class settings for a range of characters. * add command-line option -report-charclass. * fix most lintian warnings about test-package * add eraseSavedLines resource. * document DECSED 3 in ctlseqs.ms (report by Ben Longmans). * improve integration between configure-events and updates for reported screensize, in particular when switching between vt100 and tek4014 modes. * modify selection-highlighting of reverse-video text to keep that distinct, e.g., by reversing the selection foreground and background colors as one would expect. This fixes a "useless" case in the description of highlightColorMode. * improve fix for Debian #759734, addressing a case where non-colored cursor would be invisible against reverse-video (see patch #311). * updates for ReGIS (Ross Combs): + the "H" option of the "T" command should multiply by 10, not 20. + display unknown glyphs as a solid block. + given a succession of text-direction options, use the last. + fix the direction of ReGIS slanted text so that negative values produce oblique output . + fix the ReGIS text direction option to only rotate characters when no following size option is used. * update terminfo to better match corresponding entries in ncurses, e.g., u8 pattern to match the VT220, VT420, etc., primary responses, as well as adding smxx and rmxx. * fixes from Jörg Sommer: + corrected a trace-message regarding maximum graphics-size; it used the similar ReGIS maximum size which might not be configured. + in do_select_regex, clear selection if there is no match. If the regex does not match anything around the cursor, the selection returned must be empty, otherwise the whole line is treated as a match. This way the command defined by exec-selectable will not be executed if there is no match. + modify limit in do_select_regex to include the character at the cursor in the match, making it easier to type something and then hit the key to trigger exec-selectable. + If exec-selectable or insert-selection is triggered by a mouse button click, the position of the mouse pointer should be used. This makes it easier to address any position on the window and it makes it possible to use the mouse, e.g., for applications such as mutt where you cannot move the cursor. * modify DECRC to save/restore xterm's last-column flag used to control wrapping behavior rather than manipulating DECAWM (report/analysis by Mattias Engdegård). * add configure option --enable-terminfo-env to use the value set by --with-own-terminfo for the $TERMINFO environment variable. That variable was set automatically for HPUX, but would be useful in other systems, e.g., for Solaris (request by Jeff Wieland). * fix a race condition when setting up a signal handler to timeout if opening /dev/tty hangs (patch by Tobias Stoeckmann). * review/cleanup resources which were not in the manual page (report by Maxwell Anselm): + add manual page description as needed. + drop resource name for menuBar, as unnecessary. + modify fallback numeric value for regisScreenSize resource to match that for maxGraphicSize. * updated configure macros CF_ADD_CFLAGS, CF_CC_ENV_FLAGS, CF_GNU_SOURCE, CF_MATH_LIB, and CF_XOPEN_SOURCE from other program-changes. * update config.guess, config.sub * change “maximum screensize” assumed by resize to 9999x9999, to accommodate people using the Unreadable font. * drop Utility from default value of --with-desktop-category (Debian #780176). * widen the configure script pattern used for finding related ".desktop" files, including “Terminal” * several minor improvements to font utility functions: + provide for later modification to implement font-sets by parsing the font resources as comma-separated lists. + parse -fn and -fa similarly, using “x:” and “xft:” prefixes for font name/family strings to distinguish between XLFD and Xft font specifications. + use loops to iterate over font classes + use getters/setters for font data to allow for on-demand lookups. + make the debugging trace for missing glyph less verbose since that interferes with the -report-fonts option. + refactor xtermLoadFont to make it clearer how some fonts are derived from others, e.g., bold, wide. + make the triggering and suppressing of font-warnings more consistent by storing the last state in the widget. + reduce font-warnings by checking for repeated warnings. * add vttests/query-status.pl * add vttests/closest-rgb * add special case for displaying soft-hyphen if it happens to fall at the right margin, and omitting similar case such as the BIDI markers, where a zero-width character is neither a control character nor a combining character (Debian #844325). * modify logic for OSC 52, manipulate selection data, to update the selection-time to include the latest X events. This fixes some cases where the selection was invalid, e.g., after an event due to focus-follows-mouse (report/testcase by Stephane Chauveau). * revise macro CastMallocN as new macro TextAlloc to make explicit use of sizeof(char) (prompted by patch by Cade Foster). * add “Mouse Ops” menu entry and related resources to allow runtime disabling/enabling of the mouse protocol escape sequences (discussion with Bob Proulx). * improve discussion of mouse actions versus protocol in the manual (discussion with Bob Proulx). * improve discussion of environment variables in the manual, pointing out where some features (such as termcap and the System5 COLUMNS and LINES variables) are used rarely, mainly to support legacy applications. * add examples of translations resource for select/paste, and for font-size changes to the manual. * minor reordering of some entries in ctlseqs.ms for consistency (report by Arran Ubels). * add -s option to 256colors2.pl and 88colors2.pl, to demonstrate modifying the “system” colors 0–15. * omit XFT_SPACING property from call to XftPatternBuild, to work around a bug in fontconfig for handling Google Go fonts, whose names sort in an order not expected by fontconfig, causing the request for a monospaced font to return italics, e.g., $ fc-match 'Go Mono:spacing=monospace' Go-Mono-Italic.ttf: "Go Mono" "Italic" (report by Giacomo Boffi on Stackoverflow). * modify minstall.in to improve a workaround added to the manual page in patch #182 to avoid having the C preprocessor used in the imake configuration strip out the comments in the character classes section (reports by Ted Unangst, Anthony J Bentley).

jperkin pushed a commit that referenced this issue Mar 14, 2014

Update ruby-tilt to 1.3.7.

709a3bb

## 1.3.7 (2013-04-09) * Erubis: Check for the correct constant (#183, mattwildig) * Don't fail when BasicObject is defined in 1.8 (#182, technobrat, judofyr)

jperkin pushed a commit that referenced this issue Apr 16, 2015

Update to 0.4.4:

5f89e17

* Support for client certificates via the new auth_cert parameter, see issue #182 and pull request #183. * The icalendar package is no longer required. * Several bugfixes related to collection creation.

jperkin closed this as completed in 5d41b8d Jun 17, 2015

jperkin pushed a commit that referenced this issue Mar 20, 2017

Update to 3.5.1. Changelog:

a53a2f6

- Fix bug #181 ERR_RESPONSE_HEADERS with bypass - Fix bug #183 whitelist and identification - Fix bug #182 e2guardian systemd service does not support reload - Fix bug #178 (NTLM Messages)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

openssh lacks GSSAPI support #182

openssh lacks GSSAPI support #182

jeffpc commented Mar 10, 2014